• Management & Information Systems Review
• /
• v.26
• /
• pp.293-309
• /
• 2008

This study examined the market efficiency of korea stock market by comparing variance ratios(VR) of stock groups which is sorted by market capitalization. We compute variance ratios of KOSPI large capitalization, midium capitalization, and small capitalization for 546 trading days from 2006/01/02 to 2008/04/15. For our study, we also use high frequency data that is; intra-day 1 minute data. The characteristics of variance ratios of stock groups by market capitalization as follows: From 1 to 5 minute interval, variance ratios of three stock group increase far from zero(0). The longer time interval, the more variance ratios decrease, but only large capitalization converge on around zero. This means that the market of large capitalization is more efficient compare to other stock groups. The entire sample period can be divided two sub-period because the impact of sub prime crisis arised from U.S.A. influences Korea stock market. Before sub prime crisis, the VRs of mid cap and small cap do not converge on around zero except large cap although the time interval is longer. After sub prime crisis, the VRs of three stock groups decrease when time interval is longer, but only large cap converge on around zero. We conclude that large cap is more efficient than other stock groups in Korea Stock Market.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.1
• /
• pp.60-66
• /
• 2005

Pod shape of twenty soybean (Glycine max L. Merrill) genotypes was evaluated quantitatively by image analysis using elliptic Fourier descriptors and their principal components. The closed contour of each pod projection was extracted, and 80 elliptic Fourier coefficients were calculated for each contour. The Fourier coefficients were standardized so that they were invariant of size, rotation, shift, and chain code starting point. Then, the principal components on the standardized Fourier coefficients were evaluated. The cumulative contribution at the fifth principal component was higher than $95\%$, indicating that the first, second, third, fourth, and fifth principal components represented the aspect ratio of the pod, the location of the pod centroid, the sharpness of the two pod tips and the roundness of the base in the pod contour, respectively. Analysis of variance revealed significant genotypic differences in these principal components and seed number per pod. As the principal components for pod shape varied continuously, pod shape might be controlled by polygenes. It was concluded that principal component scores based on elliptic Fourier descriptors yield seemed to be useful in quantitative parameters not only for evaluating soybean pod shape in a soybean breeding program but also for describing pod shape for evaluating soybean germplasm.

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.390-398
• /
• 2000

The purpose of this study was to evaluate the apical fitness of non-standardized gutta-percha cones in root canals prepared with rotary Ni-Ti root canal instruments of various tapers and apical tip sizes. Simulated sixty curved root canals of plastic blocks were prepared with crown-down technique using rotary root canal instruments of Maillefer ProFile$^{(R)}$ .04 and .06 taper (Maillefer Instrument SA, Switzerland). Specimens were divided into six groups and prepared as follows: Group 1, prepared up to size 25 of .04 taper ; Group 2, prepared up to size 30 of .04 taper ; Group 3, prepared up to size 35 of .04 taper ; Group 4, prepared up to size 25 of .06 taper ; Group 5, prepared up to size 30 of .06 taper ; Group 6 ; prepared up to size 35 of .06 taper. After cutting off the coronal portion of plastic, blocks perpendicular to the long axis of the canal with the use of a diamond saw, apical 5mm of canal space was analyzed. Prepared apical canal spaces were duplicated using rubber base impression material to evaluate two dimensional total area of apical canal space. Various sized gutta-percha cones were applied in the 5mm-apical canal space, which were size 25, size 30 and size 35 standardized gutta-percha cone, Diadent Dia-Pro ISO-.04$^{TM}$ and .06$^{TM}$(Diadent, Korea), and medium-fine (MF), fine (F), fine-medium (FM) and medium (M) sized non-standardized gutta-percha cones (Diadent, Korea). Coronal excess gutta-percha were cut off with a sharp blade. Photographs of impressed apical canal spaces and gutta-percha cones were taken with a CCD camera under a stereomicroscope and stored in a computer. Areas of the total canal space and gutta-percha cones were calculated using a digitalized image analysing program, CompuScope (Sungjin Multimedia Co., Korea). Ratio of apical fitness was obtained by calculating the area of gutta-percha cone to the total area of the canal space. The data were analysed statistically using One-way Analysis of Variance and Duncan's Multiple Range Test. The results were as follows: 1. In canals prepared up to size 25 ProFile$^{(R)}$ of .04 taper, non-standardized MF and F cones occupied significantly more canal space than Dia-Pro ISO-.04$^{TM}$ or size 25 standardized ones (p<0.05). 2. In canals prepared up to size 30 ProFile$^{(R)}$ of .04 taper, non-standardized F cones occupied significantly more canal space than Dia-Pro ISO-.04$^{TM}$ or size 30 standardized ones (p<0.05), and non-standardized MF cones occupied more canal space than size 30 standardized ones (p<0.05). 3. In canals prepared up to size 35 ProFile$^{(R)}$ of .04 taper, there was no significant difference in canal space occupation among non-standardized MF and F, size 35 standardized, and Dia-Pro ISO-.04$^{TM}$ cones (p>0.05). 4. In canals prepared up to size 25 ProFile$^{(R)}$ of .06 taper, non-standardized MF and F cones occupied significantly more canal space than Dia-Pro ISO-.06$^{TM}$, or size 25 standardized ones (p<0.05), and Dia-Pro ISO-.06$^{TM}$, cones occupied significantly more space than size 25 standardized ones (p<0.05). 5. In canals prepared up to size 30 ProFile$^{(R)}$ of .06 taper, non-standardized FM cones occupied significantly more canal space than Dia-Pro ISO-.06$^{TM}$ or size 30 standardized ones (p<0.05), and non-standardized F cones occupied significantly more canal space than size 30 standardized ones (p<0.05). 6. In canals prepared up to size 35 ProFile$^{(R)}$ of .06 taper, non-standardized M and FM, Dia-Pro ISO-.06$^{TM}$ occupied significantly more canal space than size 35 standardized ones (p<0.05). In summary, in both canals prepared with .04 or .06 taper ProFile$^{(R)}$, non-standardized cones showed better fitness than Dia-Pro ISO$^{TM}$ or standardized ones, which was more characteristic in smaller canals.

• Journal of Korean Academy of Nursing
• /
• v.39 no.1
• /
• pp.95-106
• /
• 2009

Purpose: The purposes of this study were to explore the functional status of elderly residents and to analyze time use, and finally identify factors to predict nursing care needs in relation to functional status and health related variables. Methods: In this study a descriptive-correlational design was used. Functional status of participants was obtained through interviews, and nursing care time was examined using a 1 min time-motion study with a standardized instrument developed by Korea Long-Term Care Planning Committee (2005). Results: The mean total functional score was 65 (range 28-125) and mean total nursing care time was 144.15 min per day. There were significant positive relationships between total nursing care time, marital status, back pain, dementia, and vision impairment. Multiple regression analyses showed that a liner combination of number of illnesses, types of primary disease, ADL, IADL, cognitive function, nursing demand, and rehabilitation demand explained 42.8% of variance of total nursing time. ADL (${\beta}$=-.533) was the most significant predictor of nursing service need. Conclusion: Identifying factors that result in variations of service need has implications for adequate nursing service, estimation of optimum nurse to patient ratio, quality of care and patient safety.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.222-232
• /
• 1999

The purpose of this study was to evaluate the effect of heated spreader on the sealing ability of lateral condensation, compared with regular cold spreader. Forty two extracted human teeth with single canal were randomly placed into 3 experimental groups, and four additional teeth were used as positive and negative controls. Each group was prepared with Ni-Ti Profile #40 using step-down technique and obturated with standardized colored gutta-percha cone by standard(cold) lateral condensation technique, warm lateral condensation technique with Endotec and hot spreader soaked in glass bead sterilizer, each with Sealapex sealer. Control groups were not obturated, but prepared. After 2 days in 2% methylene blue, the teeth were invested and made into transparent resin blocks. And then, each block was sectioned horizontally with microtome at 1, 2, 3, 4, 5 mm levels from the apex. The linear extent of dye penetration was examined with stereomicroscope at ${\times}$20 magnification. At each of 5 levels, ratio of the area of gutta-percha was obtained by calculating the area of gutta-percha to the total area of the canal. The data collected were then analyzed statistically using an analysis of variance(ANOVA) and Scheffe test. The results were as follows ; 1. All experimental groups produced the apical microleakage. 2. The mean leakage was 1.57${\pm}$0.76mm for cold spreader group, 0.86${\pm}$0.95mm for Endotec spreader group, and 0.64${\pm}$0.93mm for hot spreader group. The difference between hot spreader group and cold spreader group was statistically significant(p<0.05). 1. At the 1 mm level, the mean ratio of area of gutta-percha was 74.58${\pm}$13.15(%) for cold spreader group, 65.42${\pm}$14.62(%) for Endotec spreader group, and 80.72${\pm}$14.63(%) for hot spreader group. There was statistically significant difference between hot spreader group and Endotec spreader group(p<0.05). 2. At the 2mm level, the mean ratio of area of gutta-percha was 87.86${\pm}$11.22(%) for cold spreader group, 66.55${\pm}$14.02(%) for Endotec spreader group, and 92.93${\pm}$7.24(%) for hot spreader group. There was statistically significant difference between Endotec spreader group and other two spreader groups(p<0.05). 3. At the level 3, 4, 5 mm, there was no statistically significant difference between each group. Within the limits of the results of this experiment, warm lateral condensation technique with hot spreader soaked in a glass bead sterilizer demonstrated favorable apical sealing effect and improved density of gutta-percha mass. Thus, it is thought that this obturation technique is effective for clinical use and beneficial to reduce condensation forces, also economical and easy. Lateral condensation, Heated spreader, canal sealing, Microleakage.

• Physical Therapy Korea
• /
• v.21 no.3
• /
• pp.38-44
• /
• 2014

The aim of this study was to investigate the effects of different postural correction in the electromyographic (EMG) activity of the trunk and hip muscles during bridging exercises. Twenty-four healthy subjects volunteered for this study. The muscle activity was recorded with surface electrodes over the erector spinae, multifidus, gluteus maximus (GM), and hamstring (Ham) muscles; it was measured by using surface EMG equipment under the following 3 experimental conditions: manual postural correction, verbal correction, and no correction. The maximal voluntary isometric contraction (MVIC) was determined for each muscle group in order to represent each exercise as a percentage of MVIC and allow for standardized comparison between subjects. A one-way analysis of variance was used to determine significant differences in the EMG activities of each muscle between the 3 experimental groups. During bridging exercises, the manual postural correction on normalized EMG activity of the GM muscle during manual guiding was significantly higher than during verbal guiding and without guiding (p<.05). Furthermore, the GM/Ham ratio was significantly higher during manual guiding than during verbal guiding and without guiding (p<.05). These findings suggest that the activities of the hip and trunk muscles may be favorably modified with manual guiding during bridging exercises.

• The korean journal of orthodontics
• /
• v.45 no.5
• /
• pp.253-260
• /
• 2015

Objective: The aim of this study was to evaluate the facial dimensions of young adult women with a preferred facial appearance and compare the results with those from the general population. Methods: Twenty-five linear, nine angular, and three area measurements were made and four ratios were calculated using a sample of standardized frontal and lateral photographs of 46 young adult women with a preferred facial appearance (Miss Korea group) and 44 young adult women from the general population (control group). Differences between the two groups were analyzed using multivariate analysis of variance (MANOVA). Results: Compared with the control group, the Miss Korea group exhibited a significantly greater facial height, total facial height (TFH; trichion-menton), facial width (tragus right-tragus left), facial depth (tragus-true vertical line), and trichion-nasion/TFH ratio and smaller subnasale-menton/TFH and facial width/TFH ratios. Furthermore, the control group had smaller intercanthal and interpupillary widths. Conclusions: The Miss Korea group exhibited longer, wider, and deeper faces compared with those from the general population. Furthermore, the Miss Korea group had larger eyes, longer but less protruded noses, longer and more retruded lower lips and chins, larger lip vermilion areas, and smaller labiomental angles. These results suggest that the latest trends in facial esthetics should be considered during diagnosis and treatment planning for young women with dentofacial abnormalities.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.1
• /
• pp.185-199
• /
• 1999

The purpose of the present study was to investigate craniofacial patterns in Korean male and female adults, and to compare morphologic differences between different facial types. In order to get configurational groupings, standardized lateral and P-A cephalograms of 174 Korean adults were measured and analyzed with seven angular, nineteen linear, four ratio, and two index measurements. Ward's minimum variance cluster analysis was employed to divide the sample into groups having similar craniofacial morphology, and thereafter, inductive statistics(t-test) was used to characterize morphologic differences of the divided groups. And also, Pearson correlation coefficients were calculated to assess correlation between the cranial dimensions and upper/lower anterior facial height(UAFH, LAFH) in each facial types for both male and female The results were as follows; 1. There existed sexual dimorphism in most of variables except SN-FH angle, palatal plane angle, facial axis angle, facial index, lower anterior facial height ratio and upper facial height ratio. 2. A brachycephalic headform ($0.84{\pm}0.05$) with leptoprosopic facial form ($0.92{\pm}0.05$) was appeared in male, and a mesocephalic headform ($0.86{\pm}0.06$) with leptoprosopic facial form ($0.92{\pm}0.04$) was exhibited in female. 3. Facial types in both male and female subjects were divided into two groups, Group A (mesoprosopic facial type) and Group B (leptoprosopic facial type). The morphologic differences between Group A and Group B were as follows: a. Cranial measurements including index, angular and linear measurements were not found to be different between Group A and Group B in both sexes. b. Increased UAFH, LAFH, and upper/lower anterior dental heights were exhibited in Group Bs of both male and female. c. In both male and female, ramus height and mandible length showed no difference between Group A and Group B. However, genial angle was found to be larger in Group B than Group A. Therefore, the morphologic differences between two groups in male and female were closely related to less favorable anatomic morphology of the mandible. 4. LAFH and UAFH showed no relationships with cranial dimensions in male and female.

• Development and Reproduction
• /
• v.4 no.2
• /
• pp.147-152
• /
• 2000

Four clonal lines of ayu, Plecoglossus altivelis, were produced through gynogenesis, mixed before hatching and reared communally. After 10 months, a randomly taken sample was subjected to a standardized shallow water stressor. Hematocrit, hemoglobin, red blood cells count (RBC) and mean corpuscular volume (MCV) were obtained from stressed and non-stressed fish. DNA fingerprinting was used to confirm the clonal nature of the organisms and to identified the clonal line to which each fish belonged. 1 observed significant differences between clona] lines mostly in the hematocrit and MCV measured under no-stress conditions. Such differences are suggested to represent mainly genetic variance, on account of the common environment provided to all the experimental groups. The stress response ratio was lower than expected, mainly due to some unexpectedly high non-stress values. Heritability values (h$^2$) were medium to high for the no-stress measurements (mean 0.238) and very low or zero for the stressed groups'traits (excepting one high value of 0.484). 1 conclude that the use of communally reared clonal lines represents a good tool for the characterization of the physiological traits, thus allowing for their utilization as genetic selection criteria.

• Journal of Oral Medicine and Pain
• /
• v.36 no.1
• /
• pp.39-51
• /
• 2011

The aims of this study were to investigate whether the facial skeletal patterns previously reported to be related to temporomandibular disorder (TMD) in other studies could be consistently observed in the TMD patients diagnosed according to Research Diagnostic Criteria for Temporomandibular Disorder (RDC/TMD) Axis I and evaluate its usability in the orthodontic clinics to examine the patients with TMD related symptoms. The clinical records and radiographs of female patients who visited the TMD and Orofacial Pain Clinic of Seoul National University Dental Hospital and were diagnosed as TMD were consecutively filed for this study. Patients were clinically examined and diagnosed according to the revised diagnostic algorithms of RDC/TMD Axis I and the lateral cephalogram, panoramic orthopantomogram, temporomandibular joint (TMJ) orthopantomogram, and transcranial radiograph of each patient were taken and digitalized. The data of patients who were under 18 years of age or had any systemic disease, trauma history involving the TMJ, or skeletal deformity at the time of the first examination were excluded. The remaining data of 96 female patients were finally analyzed. The obtained results were as follows: 1. There are no significant differences of cephalometric measurements between RDC I (muscle disorders) diagnostic groups. 2. Only the articular angle of the RDC group IIc (disk displacement without reduction without limited opening) patients was larger than patients of the no diagnosis of RDC II group (disk displacement). 3. Larger articular angle and smaller facial height ratio were observed in RDC IIIc group (osteoarthrosis) compared to IIIa group (arthralgia). Larger articular angle, larger Bjork sum, smaller posterior facial height, and smaller facial height ratio were observed in RDC group IIIc compared to no diagnosis of RDC III group (arthralgia, arthritis, and arthrosis). 4. According to the results of cephalometric analysis in simplified RDC groups, smaller overjet was observed in muscle disorders (MD) group. Facial height ratio and IMPA were smaller and articular angle was larger in disk displacements (DD) group than in no diagnosis of DD group. In arthrosis (AR) group, posterior facial height, and facial height ratio were smaller, and articular angle, gonial angle, facial convexity, FMA, Bjork sum, and ANB were larger than in no diagnosis of AR group. In joint pain (JP) group, only posterior facial height was smaller than no diagnosis of JP group. In conclusion, Facial morphologic patterns showing posterior-rotated mandible and lower posterior facial height is related to RDC group II and III diagnosis of the TMJ in female TMD patients. RDC/TMD Axis I diagnosis can provide a good clinical diagnostic tool for the standardized examination of the TMJ in orthodontic clinics.