• 대한가정학회지
• /
• 제31권4호
• /
• pp.183-191
• /
• 1993

This study was investigated the personal rating reason for preference, and opinion for improvement on the Korean traditional foods. Questionnaire were answered by male and female university students at 8 universities in Seoul and the results are summarized as follows. 1) General trend of subjects showed preference for traditional food in order of nutrition, appearance, taste, economics, and cooking method. While the value of food itself such as nutrition, appearance, taste was rated high, practical side such as economics, and cooking method was not so agreed. Especially female students set as lower value on cooking method. 2) As a reason for rating it low, male and female students answered without distinction that traditional food are laborious and much time is needed for cooking. 3) For the idea of improving traditional food, all students had same opinion that standardized cooking method should be developed for convenient use at home, and secondly, special salestore of traditional food should be promoted. Particularly more male students had the opinion that traditional cooking method should be succeeded to at home than female students. Summarizing some significant findings from the analysis of data, all students prefer traditional food itself relatiovely. But generally they rate it low because traditional food is difficult to cook and there are not so many chances of eating. Therefore, it is regarded that standardized cooking method and promoted special salestore for more chance of eating will activated the interest of young generation, and hence contribute to succession of tradition.

• 한국철도학회논문집
• /
• 제11권6호
• /
• pp.562-568
• /
• 2008

현대의 물류는 파렛트를 활용한 일관운송체계로 변화하고 있다. 더불어 포장용기의 적재율과 타 수송수단과의 정합성을 높이려는 노력도 병행되고 있다. 이와 같은 일련의 추세는 물류의 효율화를 통한 물류비 절감이라는 명제에 기반을 둔다. 파렛트를 이용한 일관수송에서 기본이 되는 것은 포장의 단위이다. 개별 포장의 크기와 형태가 포장용기의 적재율을 최대화시키도록 하는 것이 관건이기 때문이다. 또한 포장용기는 이차적으로 수송수단의 적재함이나 보관시설 등 연관된 물류활용에 영향을 미치기 때문에 포장의 단위가 미치는 파급의 범위는 넓다. 본 연구의 목적은 포장모듈 표준화 사업의 효과를 평가하는 척도(MOE)를 선정하고 이를 반영한 평가모형을 개발하는데 있다. 선행연구의 사례와 타 학문분야의 계량화 방법 등을 토대로 포장모듈의 표준화가 물류산업에 미치는 영향을 파악하고 이를 계량화하는 방안을 제시한다. 연구의 방법론적 측면에서 볼 때 물류활동 부문별로 나타나는 포장모듈 표준화의 효과를 어떠한 방법으로 계량화하고 가중치를 두어 하나의 대표값으로 추출하느냐가 관건이 된다.

• 보건행정학회지
• /
• 제25권3호
• /
• pp.197-206
• /
• 2015

Background: The purpose of this study was to propose a method for developing a measure of hospital-wide all-cause risk-standardized readmissions using administrative claims data in Korea and to discuss further considerations in the refinement and implementation of the readmission measure. Methods: By adapting the methodology of the United States Center for Medicare & Medicaid Services for creating a 30-day readmission measure, we developed a 6-step approach for generating a comparable measure using Korean datasets. Using the 2010 Korean National Health Insurance (NHI) claims data as the development dataset, hierarchical regression models were fitted to calculate a hospital-wide all-cause risk-standardized readmission measure. Six regression models were fitted to calculate the readmission rates of six clinical condition groups, respectively and a single, weighted, overall readmission rate was calculated from the readmission rates of these subgroups. Lastly, the case mix differences among hospitals were risk-adjusted using patient-level comorbidity variables. The model was validated using the 2009 NHI claims data as the validation dataset. Results: The unadjusted, hospital-wide all-cause readmission rate was 13.37%, and the adjusted risk-standardized rate was 10.90%, varying by hospital type. The highest risk-standardized readmission rate was in hospitals (11.43%), followed by general hospitals (9.40%) and tertiary hospitals (7.04%). Conclusion: The newly developed, hospital-wide all-cause readmission measure can be used in quality and performance evaluations of hospitals in Korea. Needed are further methodological refinements of the readmission measures and also strategies to implement the measure as a hospital performance indicator.

• 전기전자학회논문지
• /
• 제18권3호
• /
• pp.349-355
• /
• 2014

반도체 IP를 재사용하여 통합 칩을 개발하기 위해서는 반도체 IP 인터페이스의 정확한 이해가 필수적이다. 그러나 이들 인터페이스는 대부분 원래 설계자의 스타일대로 기술되어 있는데다가 기술 방법이 제각각이어서 통합 칩 설계자가 이해하는데 많은 혼란이 따른다. 본 논문에서는 반도체 IP 인터페이스를 기술하는 표준화된 방법을 제안한다. 제안하는 기술 방법은 반도체 IP 인터페이스를 IP 정보, 기술 수준, 모델 제공, 데이터 타입, 인터페이스 정보, 포트 정보, 신호 정보, 프로토콜 정보, 소스 파일의 9개 항목으로 나누어 정의한다. 제안된 방법은 통합 칩 설계자가 반도체 IP의 인터페이스를 이해하고 통합 칩을 구현하는데 도움이 된다.

• 전기전자학회논문지
• /
• 제18권3호
• /
• pp.341-348
• /
• 2014

재사용하고자 하는 다수의 반도체 IP를 연결하여 통합 칩을 구현하는 경우, 각각의 반도체 IP에 대해 합성이 가능한 코드 파일과 시뮬레이션 및 검증이 가능한 인터페이스 모델링 파일을 제공하여야 한다. 그러나 이들 반도체 IP의 설계자가 모두 다르기 때문에 인터페이스 모델링 파일의 기술 방법 및 구체도 수준이 제각각이어서 시뮬레이션 및 검증이 어렵다는 문제가 있다. 본 논문에서는 반도체 IP 인터페이스의 모델링을 몇 가지 정의된 구체도 수준으로 제한하여 표준화한 모델링 방법을 제안한다. 제안된 방법은 통합 칩 설계자가 서로 다른 반도체 IP를 손쉽게 연결하여 시뮬레이션하고 검증하는데 도움이 된다.

• 기본간호학회지
• /
• 제22권4호
• /
• pp.406-415
• /
• 2015

Purpose: This study was conducted to investigate the effects on problem solving ability and learning satisfaction in nursing students using a teaching method with a standardized patient (SP) receiving blood transfusion. Method: The research design was a quasi-experimental pre-and-post-test control and experimental group for the methodological comparison study. Participants were 43 (Exp.=22, Cont.=21) nursing students in G city. The experimental group participated in the teaching class using SP. The control group received conventional education using a simple model. Data were collected between June 5 and July 15, 2015, through self-report structured questionnaires and data were analyzed using the SPSS/WIN 21.0 program. Results: There were significant differences in the level of problem solving ability (t=-2.75, p=.009), and learning satisfaction (t=-2.53, p=.016) between the experimental and control groups. Conclusion: The research findings indicate that, the teaching method using an SP is more effective in improving nursing students' problem solving ability and learning satisfaction compared to conventional education using a simple model. In the future it is necessary to develop scenarios of various cases and content, and to test their effectiveness.

• 한국전기전자재료학회논문지
• /
• 제31권2호
• /
• pp.122-127
• /
• 2018

In an attempt to estimate the life projection of LED packages, IESNA published a paper regarding an LED package measurement test method in 2008, and a life projection technical document in 2011, to be used for LED life estimation. IESNA's publications regarding LED package measurement methods were functional, but they were not internationally standardized before 2017. In order to develop a standardized method, the International Standard chose to use the LM-80 as a measurement method for LED life projection in their publication in 2017. Many projection methods have been discussed by the IEC Technical Committee 34 working group, including the method using an exponential function, which reflects lumen degradation characteristics well. This study is designed to explore alternative LED package life estimation methods using an exponential function with statistical analysis, other than the one suggested by the International Standard.

• 한국IT서비스학회지
• /
• 제16권1호
• /
• pp.55-72
• /
• 2017

Many of the studies of visual attention that are currently underway are seeking ways to make application systems that can be used in practice, and obtained good results using not only simulated images but also real-world images. However, despite that previous studies of selective visual attention are models intended to implement the human vision, few experiments verified the models with actual humans and there is no standardized data nor standardized experimental method for actual images. Therefore, in this paper, we propose a new performance evaluation techniques necessary for evaluation of visual attention systems. We developed an evaluation method for evaluating the performance of the visual attention system through comparison with the results of the human experiments on visual attention. Human experiments on visual attention is an experiments where human beings are instinctively aware of the unconscious when images are given to humans. So it can be useful for evaluating performance of the bottom-up attention system. Also we propose a new selective attention system that guides the user to effectively detect ROI regions by using spatial and temporal features adaptively selected according to the input image. We evaluated the performance of proposed visual attention system through the developed performance evaluation method, and we could confirm that the results of the visual attention system are similar to those of the human visual attention.

• Restorative Dentistry and Endodontics
• /
• 제19권2호
• /
• pp.461-472
• /
• 1994

The purpose of this study was to evaluate the sealing ability according to types of spreader and compatibility of accessory cone used in lateral condensation method. 120 plastic blocks with canal preformed were instrumented with K-,H-files and Gates-Gllidden bur. Shaped plastic blocks were divided into six experimental groups according to spreader and accessory cone used in lateral condensation. Then they were obturated by lateral condensation method without -sealer. Six experimental groups were as follows: Group 1 : Filling with #30 spreader & #25 gutta-percha cone Group 2 : Filling with #30 spreader & Fine accessory cone Group 3 : Filling with #3 spreader & #25 gutta-percha cone Group 4 : Filling with #3 spreader & Fine accessory cone Group 5 : Filling with #20,#30 spreader & #25 gutta-percha cone Group 6 : Filling with #2, #3 spreader & Fine accessory cone All the blocks were stored in 100% humidor at room temperature for 2 days. Each block was placed in centrifuged for 20 minutes at 3,000 rpm. Apical leakage was mesured from the apical foramen to the most coronal level of- dye leakage in millimeter under a stereoscope. The data were analysed by ANOVA. The obtained results were as follows; 1. In groups using two spreaders(Group 5,6), the linear leakage was less than one spreader using groups(Group 1-4). 2. Tn groups using two spreaders(Group 5,6), there was no significant difference in linear leakage between standardized -spreader group and non standardized group (p>0.01). 3. When one spreader was used(Group 1-4), standardized-spreader groups showed less linear leakage than nonstandardized spreader groups(P<0.01). 4. In case of using same spreader(Groupl,2 & Group 3,4), there was no significant difference in linear leakage according to accessory cone type. 5. It needs to use one more spreaders to increase apical sealability.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.380-388
• /
• 2010

This paper explored an effective scheduling method for the Seoul-Busan High Speed Rail. It is important to decide train frequency influencing on scheduling method. Main factors to decide train frequency are location of station, social economic index, land use of station area and travel demand. In this paper, we focused on travel demand which is critical factor to decide train frequency. And we studied on standardized scheduling method. Simulation method is used to analyze the performance of explored method.