• 제목/요약/키워드: Standardization Procedure

검색결과 142건 처리시간 0.027초

COMPARISON OF LINEAR AND NON-LINEAR NIR CALIBRATION METHODS USING LARGE FORAGE DATABASES

  • Berzaghi, Paolo;Flinn, Peter C.;Dardenne, Pierre;Lagerholm, Martin;Shenk, John S.;Westerhaus, Mark O.;Cowe, Ian A.
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1141-1141
    • /
    • 2001
  • The aim of the study was to evaluate the performance of 3 calibration methods, modified partial least squares (MPLS), local PLS (LOCAL) and artificial neural network (ANN) on the prediction of chemical composition of forages, using a large NIR database. The study used forage samples (n=25,977) from Australia, Europe (Belgium, Germany, Italy and Sweden) and North America (Canada and U.S.A) with information relative to moisture, crude protein and neutral detergent fibre content. The spectra of the samples were collected with 10 different Foss NIR Systems instruments, which were either standardized or not standardized to one master instrument. The spectra were trimmed to a wavelength range between 1100 and 2498 nm. Two data sets, one standardized (IVAL) and the other not standardized (SVAL) were used as independent validation sets, but 10% of both sets were omitted and kept for later expansion of the calibration database. The remaining samples were combined into one database (n=21,696), which was split into 75% calibration (CALBASE) and 25% validation (VALBASE). The chemical components in the 3 validation data sets were predicted with each model derived from CALBASE using the calibration database before and after it was expanded with 10% of the samples from IVAL and SVAL data sets. Calibration performance was evaluated using standard error of prediction corrected for bias (SEP(C)), bias, slope and R2. None of the models appeared to be consistently better across all validation sets. VALBASE was predicted well by all models, with smaller SEP(C) and bias values than for IVAL and SVAL. This was not surprising as VALBASE was selected from the calibration database and it had a sample population similar to CALBASE, whereas IVAL and SVAL were completely independent validation sets. In most cases, Local and ANN models, but not modified PLS, showed considerable improvement in the prediction of IVAL and SVAL after the calibration database had been expanded with the 10% samples of IVAL and SVAL reserved for calibration expansion. The effects of sample processing, instrument standardization and differences in reference procedure were partially confounded in the validation sets, so it was not possible to determine which factors were most important. Further work on the development of large databases must address the problems of standardization of instruments, harmonization and standardization of laboratory procedures and even more importantly, the definition of the database population.

  • PDF

일부지역 의료기관의 외래원무관리 표준화에 관한 연구 (A study on the standardization for outpatient management and adminstration process of some regional hospitals)

  • 김진아;이무식;황혜정;김광환
    • 한국산학기술학회논문지
    • /
    • 제17권7호
    • /
    • pp.357-366
    • /
    • 2016
  • 이 연구는 일부 지역 의료기관의 외래원무관리 표준화를 위해 대한병원협회에 등록된 일부 지역 종합병원 이상 의료기관에 근무하는 원무팀 직원을 대상으로 설문조사 하였다. 이 연구의 결과를 요약하면 다음과 같다. 접수업무 프로세스는 설립주체, 병상규모, 원무팀 직원 수, 일평균 외래환자 수에 따라 큰 차이는 없었다. 그러나 진찰료 선납 여부는 병상 규모가 클수록 진찰료 선납을 받았다. 병상 예약업무 프로세스는 설립주체, 병상규모, 원무팀 직원 수, 일평균 외래환자 수에 따라 큰 차이는 없었으나, 예약 후 내원 시 진찰료 선납은 500병상 미만 의료기관이 11.8%, 500병상 이상 의료기관이 50.0%로 나타났다. 이 연구 결과 의료기관에 따라 외래원무관리 프로세스에 큰 차이는 없었으나 전산시스템, 시설관련 부분에 차이를 보였다. 이러한 업무프로세스의 차이를 극복하기 위해서는 의료기관의 경제적 부분이 지원되어야 한다. 환자에게 양질의 의료서비스를 제공하기 위해 의료기관평가인증원 조사항목과 설문을 통해 얻은 다빈도 응답을 토대로 도출한 표준화를 실제 의료기관에 적용하여 그 효과를 분석하는 것이 필요할 것으로 사료된다.

ATM망에서 프로토콜(SSCOP) 적합성 시험 방법 및 결과 분석 방법 (A method of AAL(SSCOP) protocol conformance testing and its result analysis in ATM network)

  • 장동원
    • 한국통신학회논문지
    • /
    • 제22권10호
    • /
    • pp.2348-2356
    • /
    • 1997
  • 본 고에서는 ATM망에 연결되는 단말기(TE)가 국제 기관(ITU, ISO 등)에서 제정한 표준대로 구현되어 의도된 대로 기능을 수행하는지 확인하기 위한 적합성 시험 방법 및 결과 분석 방법에 대해서 기술하였다. 적합성 시험에 관한 설명을 하기 위해서 선정한 ATM AAL 프로토콜(SSCOP)애 대한 기본 표준은 ITU-T Q.2110 과 ATM Forum UNI 3.1에 각각 규정되어 있으며, 이에 대한 시험 표준은 ATM Forum 95-1459R2에 규정되어 있다. 본 고에서는 적합성 시험을 위해서 관련 표준들을 어떻게 상호 협력해서 적합성 시험 환경을 구축하고, 이러한 환경에서 적합성 시험을 수행하고 생성된 결과를 어떻게 분석해야 히는지에 대한 방법에 대해서 기술하였다. 효율적으로 설명하기 위해서 임의의 시험 항목은 선정하였으며 이 시험 항목을 수행한 시험 결과를 분석하였다. 시험 항목에 대한 적합성 시험 수행 및 결과에 대한 분석 방법은 다른 여러 시험 항목 등에서도 적용되며,ATM망의 다른 통신 프로토콜들(signaling, AAL5 ATM layer, SSCF 등)과 다른 통신망(ISDN, SS7, IN 등)에서 사용되는 프로토콜들에 대해서도 동일하게 적용된다.

  • PDF

ISO TS 25237을 적용한 보건의료정보의 새로운 재식별 처리에 관한 연구 (Study on the New Re-identification Process of Health Information Applying ISO TS 25237)

  • 김순석
    • 융합보안논문지
    • /
    • 제19권5호
    • /
    • pp.25-36
    • /
    • 2019
  • 정보 통신 기술의 발달로 환자의 의료 정보를 전자적으로 처리하고 관리하는 병원이 증가하고 있다. 그러나 의료 정보가 전자적으로 처리되는 경우에도 환자 또는 의료진의 개인 정보를 침해 할 여지는 여전히 남아 있다. 이와 관련하여 2017년 국제 표준화기구 (ISO)는 ISO TS 25237 보건의료정보-가명을 발표한 바 있다. 본 논문에서는 ISO TS 25237에서의 보건의료정보의 가명화 절차 및 제안된 방법의 문제점에 근거한 재식별 처리 과정을 검토하고자 한다. 또한, 우리는 비식별 데이터 세트와 원본 데이터 사이의 매핑 테이블을 암호문으로 유지함으로써 기본 우리가 제안한 바 있는 안전한 차등 개인 정보 보호 방법에 재식별 절차를 추가하는 새로운 처리 방법을 제안하고자 한다. 제안하는 방법은 일부 정책적인 관리 문제를 제외하고는 ISO TS 25237 신뢰 서비스 제공 업체의 요구 사항을 충족시키는 것으로 입증되었다.

자동시험체계 TPS 이식에 관한 연구 -항공기 Wire Harness TPS를 중심으로 (A Study on TPS Migration in ATS - Focused on aircraft wire harness TPS)

  • 윤명섭;박구락;고창배;정영석
    • 한국융합학회논문지
    • /
    • 제9권10호
    • /
    • pp.277-283
    • /
    • 2018
  • 본 논문은 항공전자 부분품의 기능시험을 위해 사용하는 전용 자동시험체계(ATS)를 범용 자동시험체계로 TPS를 이식하는 연구이다. 항공전자 부분품의 성능시험을 위해 사용하는 전용 자동시험체계는 적게는 수천만원에서 많게는 수백억원에 이르는 고단가로, 항공전자 정비 사업을 영위하는 국내 기업에서는 초기 투자비용에 많은 어려움이 있어 사업 확장의 장애 요인이 되고 있다. 이러한 이유로, 본 논문에서는 전용 자동시험체계를 사용하는 정비대상품인 A항공기에 사용되는 발전기 내의 Wire-Harness를 범용 자동시험체계로 사용하도록 TPS를 이식하는 절차에 대해 연구하였다. 제안한 연구를 통해 전용에서 범용으로 TPS 이식 후 평가 및 검증을 수행한 결과 100% 성능검증을 확인하였으며, 이것은 절차의 표준화를 거쳐 무한한 확장 가능성이 있어 적은 투자로 항공전자 MRO사업의 확장을 원하는 국내 기업들에 큰 도움을 줄 수 있을 것이다.

원외탕전실 관리현황 설문조사 연구 (A Survey on the Management Status of Extramural Herbal Dispensaries)

  • 안웅찬;김현동;김지훈;노태원;한상용;김윤경
    • 대한한의학방제학회지
    • /
    • 제24권1호
    • /
    • pp.1-16
    • /
    • 2016
  • Objectives This study was conducted to investigate the management status of extramural herbal dispensary facility, which could serve as a foundation for further research and policy establishment.Method According to herbal dispensary data collected by Ministry of Health and Welfare, 78 sites were confirmed among 1,160 sites which checked extramural herbal dispensary facility. We carried out a survey on them. The survey consisted of 42 questions including general provisions, personnel management, spaces and facilities, equipment and utensils, procedure requirement for production and/or processing.Results From their responses, hygiene was regarded generally admittable. In personnel management, some answers that herbal medicines were prepared not by Korean medicine doctor or pharmacist, but by general worker. On preparation method, dosage frequency and volume were different among preparation facilities. Regarding facility management, prescription inspection was substantially carried out in many extramural preparation facilities, however, some of them was not.Conclusion There was a need for regulation of detailed management including facility, preparation, personnel management, etc., of extramural preparation facility. Furthermore, There was also a need for standardization of procedure on decoction, water management, medicinal herbs management, etc.

식각액(Wet Etchant)제조공정의 품질향상을 위한 강건설계에 대한 연구 (A study on the robust design for quality improvement of Wet Etchant manufacturing process)

  • 최용석;황덕형;조광희;오선일;강경식
    • 대한안전경영과학회지
    • /
    • 제14권1호
    • /
    • pp.155-165
    • /
    • 2012
  • This essay talks about research of robust design for quality improvement of production procedure of Wet Etchant. It suggested the optimum design method in consideration of specific capability value that is the way to maximize the quality of product in the production system by using Daguchi parameter design method while finding factors affecting product quality with analysis of production system of product A from producer D. Also, it set long term of 6months as noise factor and let it to be the robust design that can find the optimum condition of control factor that is dull to the changes of each month, that is the change in noise factor. The control factor which affects the product quality is decided as combination method, temperature of raw material, combination time and as there are too many possibilities for combination methods, we performed 4 methods first based on previous research data then derived three ways with product that passed SPEC and set as the factor. As a result of application of optimum production procedure suggested in this essay to the actual production process with its standardization, there was a effect of drop of more than 10particles in comparison to the particle number of previous product and also it brought the effect that resulted the stable number of particle of under 30 that is what the client company suggested.

모바일 포렌식의 무결성 보장을 위한 효과적인 통제방법 (An Effective Control Method for Improving Integrity of Mobile Phone Forensics)

  • 김동국;장성용;이원영;김용호;박창현
    • 정보보호학회논문지
    • /
    • 제19권5호
    • /
    • pp.151-166
    • /
    • 2009
  • 포렌식 수사 절차상의 무결성을 입증하기 위한 방안으로 해쉬 함수 알고리즘을 적용한 디지털 증거의 경우, 무결성이 손상되면 그 자료는 폐기되어야만 했다. 즉, 주요 사건의 핵심 부분에 대한 증거 확보를 위해서는 삭제 영역에 대한 증거 복원이 필수적임에도 불구하고, 전체적인 해쉬값이 처음 해쉬값과 달라 증거 데이터가 훼손됨으로 인하여 결정적인 증거 능력 확보에 어려움이 있었다. 본 논문에서는 이와 같은 문제점을 해결하기 위한 방안으로서 새로운 모바일 포렌식 절차 모델인"Evidence-Finder (이하 E-Finder) 모바일 포렌식 절차 모델"을 제안한다. E-Finder 절차는 5개 영역의 총 15개 절차 모델로 구성되며 E-Finder 절차를 기존 NIST(National Institute of Standards and Technology)모델, Tata Elxsi Security Group 모델과 비교 및 고찰하였다. 이로 인하여, 현재까지 모바일 포렌식 분야에서 표준화 되지 않고, 검증되지 않은 방법론을 개선하는 기대효과를 달성하였다.

수질오염총량관리를 위한 효율적 이행평가방안 연구 (A Study on the Method of Implementation Assessment for Total Maximum Daily Load Management)

  • 박준대;박주현;류덕희;정동환
    • 환경영향평가
    • /
    • 제17권2호
    • /
    • pp.125-132
    • /
    • 2008
  • It is desirable that implementation assessment (IA) should be carried out efficiently in order to make successful progress of Total Maximum Daily Load (TMDL) in watershed management. There are many difficulties in the process of the implementation assessment because of the early stage in the application of TMDL in Korea. This study reviewed the present status of IA and proposed the methodology of its improvement such as flexible application of TMDL ledger, and standardization of assessment index and criteria. The deficient time for assessment period could be corrected by the consideration of the post-procedure after the submission of IA report.

RFID를 이용한 자산관리시스템 모델 연구 (The study of cash management system model using the RFID)

  • 이선현;김민홍
    • 한국컴퓨터산업학회논문지
    • /
    • 제5권8호
    • /
    • pp.801-810
    • /
    • 2004
  • 컴퓨터의 등장으로 메인프레임, PC, 인터넷 시대를 거치면서 국내에 유비쿼터스 (Ubi -quitous) 시대로 소개 된지는 2~3년에 불과하다. 본 논문은 대학 내에 유$cdot$무선 인터넷이 구축되어있다는 전제하에 유비쿼터스 컴퓨팅의 핵심기술인 RFID(Raido Frequency IDentification) 태그와 EPC 플랫폼을 이용하여 획기적인 자산관리 시스템의 모델 방안을 제시하고 현재 운영중인 자산관리 시스템의 문제점인 시간, 인력, 비용 낭비와 관리운영 절차를 최소화하는데 목적이 있으며 제안하는 자산관리 시스템의 모델을 통하여 현재는 해결할 수는 없는 문제점들을 차세대 IT 분야의 표준화와 규격화 및 상용화가 이루어질 때, 향후 연구 과제로 개선 방안을 제시할 수 있으리라 본다.

  • PDF