• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.1
• /
• pp.160-169
• /
• 2000

Daily indoor and outdoor nitrogen dioxide ($NO_2$) concentration for 30 days were measured in 28 houses with questionnaire of housing characteristics in Brisbane, Australia. Using mass balance equation and regression analysis, penetration factors and source strength factors were calculated. The penetration factors of 27 houses except one house were between zero and 1, though penetration factor should be between zero and 1 by means of mass balance equation. Relationship between indoor and outdoor concentrations in each 27 house was calculated using regression analysis. According to the obtained linear regression equation, the slope means penetration factor and the intercept means source strength factor. Calculated mean and standard deviation of coefficients of determination ($R^2$) in electric and gas range houses were $0.70{\pm}0.13$ and $0.57{\pm}0.21$, respectively. The source strength factors were more than zero in 27 houses. Mean and standard deviation of slopes in electric and gas range houses were $0.65{\pm}0.18$ and $0.56{\pm}0.12$, respectively. Mean and standard deviation of intercepts in electric and gas range houses were $1.49{\pm}1.25$ and $5.77{\pm}3.55$, respectively. Air exchange rate and source strength were calculated from penetration factor and source strength factor, respectively. Geometric mean and standard deviation of calculated air exchange rates in 27 houses were $1.1/hr{\pm}1.5$. Presence of gas range was the most significant factor contributing to indoor $NO_2$ level in house characteristics (p=0.003). In gas range houses, source strengths ranged from 4.1 to $33.1cm^3/hr{\cdot}m^3$ with a mean $12.7cm^3/hr{\cdot}m^3$ and a standard deviation 9.8. The source strengths of gas range houses were significantly different from those of electric range houses by t-test (p<0.001)

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1995.04a
• /
• pp.59-64
• /
• 1995

The impediment in enhancing the ship safety and combating vessel-source marine pollution depends on the combination of the immediate and mediate factors. The former is mainly caused by human errors and failure in compliance with the international convention standards in operation of compliance with the international convention standards in operation of vessel. The latter by the attitudes and activities of some of the flay states taking little responsibilities with appropriate seriousness in policing their fleets due to the lack of implementing capability of adminstrations. So long as there exists a large size of variation in implementing capability of administration between flag states a globally remarked progress cannot expect to be made in assuring the ship safety and preventing the vessel-source pollution Therefore a new regulatory regime is suggested to be adopted by IMO to maintain high standard flag state adminstrations by recommending standard paradigm to member states so that the development of a implementing culture is encouraged and supported.

• The Research Journal of the Costume Culture
• /
• v.19 no.5
• /
• pp.945-956
• /
• 2011

The purpose for this paper is to categorize and analyze the aesthetic characteristics of graphic factors in contemporary fashion design by media source. Focused on play-instinct visual expression in contemporary fashion design and adopted media source following the way of communication design. A variety of literatures and online sites for graphic factors in contemporary fashion was studied. The standard of media source is classified as graphic media-source: photography media-source, typography media-source, illustration media-source. With this standard, expressed ways are as followings. First, graphic media-source in play-instinct expressional fashion design is mostly borrowing existed character or using designer's brand logo. Second, photography media-source in play-instinct expressional fashion design is placed photograph of social issued people in front of shirt. Third, typography media-source in play-instinct expressional contemporary fashion design is mostly expressed social messages or designer's name in brand. Fourth, illustration media-source is the best way to express play-instinct visual expression. Based on these, aesthetic characteristics of graphic factor in contemporary fashion by media source are classified as three: social words, playfulness and information transference. Frequency ratio using media source per aesthetic characteristics is different and these are able to categorize expression way and image feature. In conclusion, expressional way of graphic factors in contemporary fashion design became diverse as social and cultural changing. Frequency of graphic factor use in contemporary fashion is increased than before. This paper suggested that fashion design is one of the way of communicating with people and should be analyzed graphic factors in contemporary fashion design.

• Nuclear Engineering and Technology
• /
• v.52 no.11
• /
• pp.2601-2606
• /
• 2020

In this study, we expanded the performance of the existing EXVol code and performed empirical experiments and calculations. A high-resolution gamma spectroscopy system was constructed, and a standard point source and a standard volume source were measured with an HPGe detector with 43.1% relative efficiency. EXVol was verified by quantitative comparison of the detection efficiencies determined by measurements and calculations. To introduce the concept of the detector scanning that occurs in the actual measurement into the EXVol code, a collimator was placed between the source and detector. The detection efficiency was determined in the asymmetric arrangement of the source and detector with a collimator. A collimator made of lead with a diameter of 15 mm and a thickness of 50 mm was installed between the source and the detector to determine the detection efficiency at a specific location. The calculation result was contour plotted so that the distribution of detection efficiency could be visually confirmed. The relative deviation between the measurements and calculations for the coaxial and asymmetric structures was 10%, and that for the collimation structure was 20%. The results of this study can be applied to research using γ-ray measurements.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.3 no.1
• /
• pp.1-9
• /
• 2007

A steady-state simulation model for Dual-Source Heat Pump(DSHP) of 8RT was presented. A Dual-Source Heat Pump(DSHP) has been designed to make up for the conventional air source heat pumps. The performance evaluation has been conducted under internal standard test conditions such as ISO-13256-1 and KS C 9306. However, as test conditions such as entering water, indoor and outdoor air conditions could not be controlled to satisfy the standard test conditions in outdoor tests, a series of experiments have been conducted with the actual test conditions. Then, computer models for DSHP could be used for the standard condition have developed using EES program. The model was developed from basic thermodynamic principles and heat transfer relations. Most of the parameters were obtained with EES from the actual catalog data. The simulation results were in good agreement with the experiments.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.3
• /
• pp.81-85
• /
• 2011

The night time electric cost is cheaper due to electric supply and demand policy in Korea from 1985. Currently about 900,000 customers are using night time electric heating boilers and this causes shift of peak demand time to night in winter and increase of deficit spending. To solve this problem, replacing night time electric heating boiler by air-source heat pump using night time electricity has been proposed. An air-source heat pump can provide efficient heating equipment especially in a warm climate. For estimating the night time electric heat pump COP(Coefficient of Performance), Korean Standard KS C 9306:2010 and European Standard EN-14511:2004 is available. SCOP(Seasonal COP) using European weather bin data is also calculated. SCOP is not available yet but European Committee for Standardization will establish a standard in the near future. The evaluation result show that the replacing night time electric heating boiler by heat pump can be possible.

• Journal of electromagnetic engineering and science
• /
• v.16 no.4
• /
• pp.225-228
• /
• 2016

KRISS-V, a V-band millimeter-wave source module for a primary RF power standard and calibration system developed by the Korea Research Institute of Standards and Science is here presented. The output power of KRISS-V is several times higher than that of commercial amplifier/multiplier chains and is highly stable (the standard deviations of output power are less than 0.01% in the worst case). The spectral purity of KRISS-V is high enough to consider it a single-tone signal generator. We also added programmable attenuation capability to KRISS-V for remote power control. Moreover, the in-house source module is cost-effective and adaptable to various measurement schemes. The structure of the model as well as detailed component information are introduced so that it can be reproduced.

• Journal of Environmental Science International
• /
• v.8 no.1
• /
• pp.135-144
• /
• 1999

Air quality modeling about coastal urban region such as Pusan shoud be consider shipping source emmited from ships anchoraging and running. It has been proved at our previous studies that the ratios of air pollutants emission amount in coastal area to inland are 12.2% for NO$_2$ and 11.7% for $SO_2$ and the air qualify of coastal urban area consierably counts on ships. Also the dispersion pattern of the all pollutants followed local circulation system in this region. Therefore this study has been developed air quality model which can describe the formation, transport, transformation and deposition processes of air pollutants considering shipping source. Currently, restriction for emission amount of ships does not exist, so our study will be useful to set the omission standard and for devising air quality policy in coastal urban region.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.3
• /
• pp.300-306
• /
• 2013

This paper presents a new method for constructing bilingual lexicons through a pivot language. The proposed method is adapted from the context-based approach, called the standard approach, which is well-known for building bilingual lexicons using comparable corpora. The main difference between the standard approach and the proposed method is how to represent context vectors. The former is to represent context vectors in a target language, while the latter in a pivot language. The proposed method is very simplified from the standard approach thereby. Furthermore, the proposed method is more accurate than the standard approach because it uses parallel corpora instead of comparable corpora. The experiments are conducted on a language pair, Korean and Spanish. Our experimental results have shown that the proposed method is quite attractive where a parallel corpus directly between source and target languages are unavailable, but both source-pivot and pivot-target parallel corpora are available.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1760-1762
• /
• 2002

In this work we develop an equivalent circuit model of TCP(transformer coupled plasma) source and investigate matching characteristic. The developed circuit model includes transmission line, standard-type impedance matching network and displacement current in the plasma source. The impedance of TCP is calculated by previously developed program for various source parameters and dependance of components of matching impedance on the value of source impedance is investigated.