• Wind and Structures
• /
• 제1권1호
• /
• pp.25-42
• /
• 1998

Improvements to the Gumbel method of extreme value analysis of wind data made over the last two decades are reviewed and illustrated using sample data for Jersey. A new procedure for extending the Gumbel method to include M-th highest annual extremes is shown to be less effective than the standard method, but leads to a method for calibrating peak-over-threshold methods against the standard Gumbel approach. Peak-over-threshold methods that include at least the 3rd highest annual extremes, specifically the modified Jensen and Franck method and the "Method of independent storms" are shown to give the best estimates of extremes from observations.

• 대한기계학회논문집B
• /
• 제41권9호
• /
• pp.587-595
• /
• 2017

최근 들어 공조기가 슬림화 되고 따라서 열교환기의 깊이를 줄일 필요가 있다. 본 연구에서는 슬림형 알루미늄 열교환기에 적절한 루버 핀 형상을 도출하였다. 또한 도출된 루버 핀이 적용된 알루미늄 열교환기 시료를 제작하고 성능 시험을 수행하였다. 비교를 위하여 기존 열교환기에 대해서도 실험을 수행하였다. 도출된 형상의 핀 깊이($F_d$)는 10.0 mm, 루버 핏치($L_p$)는 0.9 mm, 루버 각(${\theta}$)은 $35^{\circ}$이다. 기존 시료에 비하여 신규 슬림 시료의 j 인자는 36%, f 인자는 2.3% 크게 나타났다. 따라서 열교환기 체적은 슬림 시료에서 26% 줄어들게 된다. 또한 동일 소비 동력에서의 전열량을 의미하는 $j/f^{1/3}$은 슬림 시료에서 55% 크다. 실험 데이터를 기존 상관식의 예측치와 비교하였다.

• Journal of Biosystems Engineering
• /
• 제32권4호
• /
• pp.263-268
• /
• 2007

An auto sampling and filtering unit was developed for monitoring automation of a fermentation process and its performance was evaluated. The automatic sampling and filtering unit was constructed with a glass filter, a diaphragm suction pump, and a flow direction change valve. To evaluate operating stability, delivery volumes of the suction pump were measured according to the experimental conditions of cellulose powder, pore size of the glass filter and suction head of the pump. The developed unit could deliver the sample solution under any experimental conditions except the filter pore size of $16{\mu}m$ and the suction head of 20cm. In case of the suction head of 30cm, the pump could not deliver the sample solution at all. Concentrations of the sample solutions were converged on those of the standard glucose solution after 8 minutes from the initial sampling time. The relative error of concentration between the sample and the standard solution showed 3.8, 4.8, 7.0% for the 1, 3, 5% contents of cellulose powder, respectively.

• 한국방사선학회논문지
• /
• 제17권4호
• /
• pp.531-539
• /
• 2023

자체흡수는 환경 시료의 감마 분광 측정 정확도에 영향을 미치는 가장 중요한 요소이다. 특히, 샘플의 화학적 구성, 기하학적 모양, 두께, 밀도, 원자 번호, 샘플과 검출기 사이의 거리, 방출된 감마 광자의 에너지 및 샘플 내 습도 계수 또는 백분율과 같은 기타 요인에 의해 영향을 받는다. 보정 방법을 테스트하기 450 ml CRM 표준선원(9개 핵종) 마리넬리 비커를 사용하였다. 보정된 값들을 적용하여 환경시료 중 토양시료 5개를 밀도별로 측정하였다. 따라서, 자체흡수 값은 다소 크고 낮은 광자 에너지에 더 효과적임을 알 수 있다. 환경 시료의 경우 선원자체 흡수를 통한 전체 에너지 피크 효율은 샘플의 밀도에 크게 의존함을 확인하였다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2000년도 춘계공동학술대회 논문집
• /
• pp.365-368
• /
• 2000

This paper proposes a new heuristic method of constructing process capability indices (PCIs) for skewed populations. It is based on weighted standard deviation (WSD) method which decomposes the standard deviation of a quality characteristic into upper and lower deviations and adjusts the value of PCI using decomposed deviations in accordance with the skewness estimated from sample data. For symmetric populations, the proposed PCIs reduce to standard PCIs. Asymptotic distributions of the estimators of the PCIs are obtained. The performances of the proposed methods are compared with those of the standard and other methods. Numerical comparisons indicate that considerable improvements over existing methods can be achieved by the use of WSD method when the underlying distribution is skewed.

• 대한기계학회논문집
• /
• 제7권3호
• /
• pp.319-327
• /
• 1983

The thermal diffusivity one of the series of standard pieces for spark test are determined by the flash method. The standard pieces are composed with carbon steels, structural carbon steels, alloy steels and high speed tool steels. In order to compute the thermal conductivity of the standard pieces, their specific heats are measured by a differential scanning calorimeter. The thermal conductivities are calculated from the data of specific heat, density and thermal diffusivity. To increase the accuracy of data for the thermal diffusivity by data reduction excursion method in the flash method, the governing heat diffusion equation, which is closely described experimental conditions with the finite pulse and the heat loss from the sample surfaces, is solved. In this analysis an integral transform is used.

• 한국연초학회지
• /
• 제27권2호
• /
• pp.226-234
• /
• 2005

The uncertainty of measurement in nitrate from burley leaf tobacco by continuous-flow analysis method was evaluated following internationally accepted guidelines. The sources of uncertainty associated with the analysis of nitrate were weight of standard and sample, purity of standard, dilution of standard solution, calibration curve, water content, etc. The calculation of uncertainty based on the GUM(Guide to the Expression of Uncertainty in Measurement) and EURACHEM/CITAC Guide. An expanded uncertainty was obtained by multiplying the combined standard uncertainty with a coverage factor (k) calculated from the effective degree of freedom. The concentration of nitrate from burley leaf tobacco was $2.09\%$ and the expanded uncertainty by multiplying by the coverage factor(k, 2.20) was $0.13\%\;at\;a\;95\%$ confidence level.

• 품질경영학회지
• /
• 제34권4호
• /
• pp.125-132
• /
• 2006

An adjusted control limit of the $\overline{X}$ chart is proposed for monitoring the continually improving processes. The continual improvement of the process implies the decrease of the process variance, which is represented by a logistic curve. The process standard deviation is estimated by the exponentially weighted moving average of the sample standard deviations from the past to the current times. The control limits are adjusted by the estimated standard deviation at every sampling time. The performance of the adjusted control limit is compared with that of the standard control limits for various cases of the decreasing speed and size of the variance. The results show that the $\overline{X}$ chart with the adjusted control limits provides better performances for monitoring the small and moderate shifts in continually improving processes.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.95-96
• /
• 2016

The floor slip test method using O-Y·PSM was developed based on the risk assessment and sense of slip by the users implementing actions such as changing walking direction on a floor. This test method is regulated under the Korea Industrial Standard KS M 3510, and in the Korea Industrial Standard KS F 3230, the article of KS M 3510 is cited. Yet, in the standard, the surface condition of test or slip adjustment method is merely mentioned or difficult to be found, and thus it creates confusion in floor slip test using O-Y·PSM. Therefore, this study is to provide the useful data to revise the relative standard through the standardization study including various surface conditions of sample and slip adjustment method used in floor slip test method using O-Y·PSM.

• 가정과삶의질연구
• /
• 제22권5호
• /
• pp.283-292
• /
• 2004

The purpose of this study was to examine the determinants of expenditure adequacy of eldery households. Data for this study were collected from 2002 House Income and Expenditure Survey of Korea National Statistical Office, which is consisting of a sample of 918 eldery households. Expenditure adequacy was investigated by the Spending to Income ratio and Expenditure to Minimum standard of living ratio. The results showed that 48% of households spent more than 100% of their taken-home income or less than the minimum standard of living. Multiple logistic regression was used to investigate the determinants of expenditure adequacy. Gender, age, education, job status, family size, and level of income were significant determinants of spending to income ratio and Expenditure to Minimum standard of living ratio. Family size had negative effect on expenditure adequacy, householder's job status and the level of income had positive relationship with it.