• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.194-194
• /
• 2010

The variable demand on the energy market, as well as the limited energy storage capabilities, requires a great flexibility in operating hydraulic turbines. But, present in Korea, the absence of testing laboratories and technical criteria for the performance test of small hydropower degrades the efficiency of the domestic hydropower machines, A performance guarantees for hydro turbines shall be contain, as a minimum, guarantees covering power, discharge and specific hydraulic energy, efficiency, maximum momentary overspeed and maximum momentary pressure and/or maximum steady-state runaway speed, as well as guarantees related to cavitation. Performance test are conducted by the test standard. Test codes based on extensive research data are written under the leadership of an IEC. Performance evaluation is carry out several test(performance test, cavitation test and runaway test). The paper presents the international turbine test laboratory and performance test standard.

• 품질경영학회지
• /
• 제50권4호
• /
• pp.793-810
• /
• 2022

Purpose: As improving the search performance of aviation security equipment is considered essential, this study proposes the need for research on how to find an optimized test sequence that can reduce test time and operator power during the search function test of explosive detection systems. We derive the weights and work difficulty adjustment factor required to find the optimized test order. Methods: First, after setting the test factors, the time of each test and the difficulty scale determined by the worker who performed the test directly were used to derive weights. Second, the work difficulty adjustment coefficient was determined by combining the basic weight adjustment factor and corresponding to the body part used by the test using objective rating. Then the final standard time was derived by calculating the additional weights for the changeability of the test factors. Results: The order in which the final standard time is minimized when 50 tests are performed was defined as the optimized order. 50 tests should be conducted without duplication and the optimal order of tests was obtained when compared to previously numbered tests. As a result of minimizing the total standard time by using Excel's solver parameters, it was reduced by 379.14 seconds, about 6.32 minutes. Conclusion: We tried to express it in mathematical formulas to propose a method for setting an optimized test sequence even when testing is performed on other aviation security equipment. As a result, the optimal test order was derived from the operator's point of view, and it was demonstrated by minimizing the total standard time.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권2호
• /
• pp.103-112
• /
• 2008

FRP와 콘크리트의 접착강도를 평가하기 위해 현장에서 일반적으로 사용되는 Pull-off 실험방법은 FRP 복합체의 손상을 초래하며 더욱이 FRP의 최대 pull-off 강도가 콘크리트의 인장강도에 의해 제한되는 단점을 지니고 있다. 이에 따라 구조보강용 접착제의 역학적 특성을 1차적으로 평가할 수 있는 간접적인 실험방법의 개발이 요구된다. 본 연구에서는 여러나라에서 각기 제안되고 있는 실험규격에 대한 비교실험을 통하여 구조보강용 접착제의 역학적 특성을 개략적으로 예측할 수 있는 표준화된 실험방법 및 평가기준을 제안하고자 하였다. 본 연구결과를 바탕으로 인장전단접착강도 시험의 접착제 두께, 압축/휨강도 시험체의 제원 등이 통일되어 표준시험체 제원을 도출할 수 있었다.

• 분석과학
• /
• 제25권2호
• /
• pp.102-113
• /
• 2012

현행 환경오염공정시험기준 중 먹는 물 수질공정시험기준과 실내공기질 공정시험기준에 대해 국제규격에 부합화된 KS ISO규격과의 일원화에 관해 연구하였다. KS규격 23,000여종을 대상으로 먹는 물 및 실내공기질관련 KS 규격을 조사하였다. 환경분야관련 KS규격은 KS I로 분류되며, 총 653종으로 조사되었으며, 이중 국제규격에 부합화된 KS I 규격은 583종으로 조사되었다. 먹는 물 수질공정 시험기준은 총 100개 기준을 대상으로 ISO/TC 147 "Water Quality" 관련 KS 규격 총 232종을 비교 검토하였으며, 실내공기질 공정시험기준은 "ISO/TC 146 "Air Quality" 관련 KS 규격 총 95종 규격을 비교 검토하였다. 문헌검토와 비교시험을 통해 먹는 물 및 실내공기질 공정시험기준과 일원화 가능한 국제규격에 부합화된 KS규격 연구결과 먹는물수질공정시험 100개 기준 중 사전일원화 완료 23개 기준, 일원화 가능 29개 기준, 일원화 불가 12개 기준, 대응 규격 없는 기준이 36개로 평가되었으며, 실내공기질 공정시험기준 17개 기준 중 사전일원화 완료 1개 기준, 일원화 가능 3개 기준, 일원화 불가 3개 기준, 대응규격 없는 기준이 10개 기준으로 평가되었다.

• 한국도로학회논문집
• /
• 제20권3호
• /
• pp.39-46
• /
• 2018

PURPOSES: This study is to estimate nondestructive strength equation based on probability for bridges using field test data. METHODS : In this study, a series of the field inspection and the test have been performed on 297 existing bridges, in order to evaluate the bridges, based on the test results of the in-depth inspection, and the estimated strengths by means of the nondestructive strength equations are analyzed and compared with results of the core specimen strengths. RESULTS : According to results of analyses, In case of standard design compressive strength of concrete is 18MPa, 21MPa, similar reliability of RILEM equation were 0.89~0.90, but in case of standard design compressive strength of concrete is 35MPa, 40MPa were 0.4~0.56. According to standard design compressive strength of concrete is 40MPa, similar reliability of ultrasonic pulse velocity method equation were 0.56. CONCLUSIONS :RILEM equation had high similar reliability than other equation in case of standard design compressive strength of concrete is 18MPa, 21MPa, but had low similar reliability than other equation in case of standard design compressive strength of concrete is 35MPa, 40MPa. and ultrasonic pulse velocity method equation had low similar reliability than other equation in case of standard design compressive strength of concrete is 40MPa.

• 전기학회논문지
• /
• 제58권5호
• /
• pp.923-928
• /
• 2009

The performance analysis and robust control of the interior permanent magnet synchronous motor(IPMSM) greatly depend on accurate value of its parameters. To achieve the high performance of torque control, it is necessary to consider exact inductance values because the inductances are nonlinear parameters of operating the IPMSM. Therefore many different methods have been performed for analysis of the methodology for the exact measurement of synchronous inductances. None of them is considered standard, and accuracy levels of all these methods are also not consistent. Among these experimental methods, the DC current decay test and the vector current control test are ideal for a laboratory environment. In this paper, these two test methods are compared by applying inductances to the IPMSM. The paper analyzes the measured inductances of the two methods and their differences with inductances obtained from the finite element method(FEM).

• 품질경영학회지
• /
• 제50권2호
• /
• pp.199-220
• /
• 2022

Purpose: The purpose of this study is to analyze the score data released by the Korea Institute of Curriculum and Evaluation to find out the problems with the current scoring system provided by the College Scholastic Ability Test and to suggest improvement measures to solve these problems. Methods: We calculated the descriptive statistics of the standard scores using the frequency distribution table of the standard scores and identified the characteristics of the standard scores by expressing the distribution as a graph. Also, we developed an index to evaluate whether each stanine level was stably assigned and calculated the indexes for each area/subject by using the data on the number of examinees for each level. Results: We found that the relationship of conversion from raw scores to integerized standard scores is different depending on the size of the standard deviation of the raw scores, and identified the problem that the raw score information is not fairly reflected in the calculation of the percentile and level as the two raw scores are converted to one standard score. This problem can be solved by calculating the standard score to a decimal point. Conclusion: In this study, as a way to improve the quality of the scores of the current CSAT, the standard score and percentile decimal notation, the specific regulations of the standard score and stanine level calculation method, and the expansion of the open range of the scores were suggested.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.203-206
• /
• 2003

The liquid limit(LL) test is universally used as a standard test for determining one of the index properties of a clay. There are two methods of determining the LL, Casagrande method and cone penetration method that is fall cone test. The interpretation of the Casagrande method of obtaining the LL is not obvious, but it has been suggested that the fall cone test is essentially a strength test and that the LL test simply ascertains the moisture content at which a clay has a certain standard undrained shear strength. This paper presents a determination of the LL by a single-point method. Results obtained from fall cone that is general method and a single-point method are analyzed by comparison.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.519-522
• /
• 2003

'KRS 6330-3256라' standard regulates performance test of insulating transformer for protecting the electronic interlock linkage equipment which is being done by test procedures and methods according to the standard. The balance/unbalance test evaluating the performance of transformer are applied by impulse voltage($l2/200{\mu}s$) but affected by many other factors. Therefore, the review about these is necessary to have the reliability and reappearance of test results. In this paper, we have simulated about several phenomenon appearing in real balance/unbalance test and compared simulated results with real ones. With the basis of these results, the influence to test result of inner and outer factors are investigated and analyzed and established the plan boosting the reliability and reappearance of test results.

• 펄프종이기술
• /
• 제41권5호
• /
• pp.8-14
• /
• 2009

Corrugated fiberboard is a widely used packaging material because of its high compressive strength and stiffness despite light weight. Corrugated fiberboards with microflutes with height $\leq$ 1.5 mm, such as E, F or G, have been developed. As microflutes have a different geometry from other conventional flutes, they may behave differently in testing and require a new testing method. Therefore, we evaluated the flat crush resistance of corrugated fiberboard with microflutes according to the ISO and TAPPI standard test methods. In addition, the effects of specimen area and platen compression rate were examined. The goal of this study was to identify an appropriate method for flat crush test (FCT) of corrugated fiberboard with microflutes. When a test piece with a standard area was subjected to the FCT in accordance with ISO and TAPPI methods, microflute corrugated fiberboard demonstrated a different load-displacement curve. An area of 20 $cm^2$ was determined to be the most appropriate for FCTof microflute corrugated fiberboard.