• 제목/요약/키워드: Standard of test methods

검색결과 2,194건 처리시간 0.035초

근전도계 및 유발성 응답기의 안전 요구사항 및 시험방법 연구 (A Study on Requirements and Test Methods for the Safety of Electromyographs and Evoked Response Equipments)

  • 문인혁;남기일;박수강;박상건
    • 재활복지공학회논문지
    • /
    • 제3권1호
    • /
    • pp.41-47
    • /
    • 2009
  • 본 논문에서는 중추신경계나 대뇌피질의 운동 및 감각기능을 검사하는 근전도계 및 유발성응답기의 안전 요구사항 및 시헙방법을 기술한다. 국제 기준에 부합화하는 안전 요구사항을 설정하고, 국제 표준에 따른 시험방법 및 표준 시험절차서를 제시하였다. 그러나 장비의 개별 성능 요구사항은 특정하지 않고, 제조사에서 제시하는 성능이나 출력이 가능하도록 규정하였다. 시중에 유통되고 있는 근전도계 장비를 이용하여 제시된 시험방법에 대한 유효성을 확인하였다. 이 연구의 결과는 식품의약품안전청에서 의료기기 인허가시 적용되는 기준규격으로서 사용될 수 있을 것이다.

  • PDF

결정질 태양전지모듈 인증시험 현황 및 분석 (The Status and Analysis of PV Module's Certificate)

  • 김경수;강기환;유권종
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 하계학술대회 논문집
    • /
    • pp.55-55
    • /
    • 2009
  • In this paper, we introduce the status of certificate test on crystalline silicon photovoltaic, module in Korea. Up to 5. 2009, about 200 models have passed certificate test under KS C IEC61215 standard. Most products are from Korea, Japan, China. And some are from USA, German and Taiwan. A few environmental test items' results and standard test methods will be discussed. The detail discussion will be shown in the following paper.

  • PDF

Design and Performance Analysis of Emulator for Standard Conformance Test of Active RFID

  • Song, Tae-Seung;Lee, Wang-Sang;Kim, Tae-Yeon;Lyou, Joon
    • ETRI Journal
    • /
    • 제31권4호
    • /
    • pp.376-386
    • /
    • 2009
  • An active radio frequency identification (RFID) system has the advantages of a long identification distance and a good identification rate, overcoming passive RFID drawbacks. Therefore, interest in the development of active RFID systems has been gradually increasing in areas of harbor logistics and national defense. However, some identification failures between active RFID systems developed under the same standards have been reported, presumably due to a lack of development of accurate evaluation methods and test equipment. We present a realization of the hardware and software of an emulator to evaluate the standard conformance of an active RFID system in a fully anechoic chamber. The performance levels of the designed emulator are analyzed using Matlab/Simulink simulations, and the applicability of the emulator is verified by evaluating the standard conformance of a real active RFID tag. Finally, we propose a new evaluation method by incorporating a self-running test mode environment into the RFID tags to reduce testing time and increase testing accuracy. The application of the suggested method to actual tags improves measurement uncertainty by 0.56 dB over that obtained using existing methods.

여러 기관의 일반시험법에 의한 식용 타르색소의 규격 비교 시험 (Comparison of General Test Methods of Various Organs on Synthetic Food Colors)

  • 신동화;김용석;이영환;방정호;엄애선;신재욱;이달수;홍기형;박성관;최장덕;김희연
    • 한국식품위생안전성학회지
    • /
    • 제20권1호
    • /
    • pp.64-68
    • /
    • 2005
  • 국내에서 유통되는 식용 타르색소 9종에 대하여 한국, 일본, 미국 및 JECFA의 색소시험법에 따라 비교$\cdot$시험하였다. 식용색소의 물불용물 함량은 각 기관의 시험법에서 차이가 없었으며, 모두 규격기준에 적합하였다. 식용색소 녹색 제3호, 적색 제3호, 청색 제2호 및 황색 제4호의 염화물 및 황산염 함량은 각 기관의 방법에 따라 약간 달랐지만 모두 규격기준에 적합하였고, JECFA와 미국방법에서는 분석하는데 시간이 더 많이 소요되었다. 비소 함량은 한국과 일본에서 비색법으로 비교하였으며, 규격기준이 미국 및 JECFA와 달랐다. 중금속 함량은 모두 규격기준에 적합하였으나 한국은 비색법, 일본은 원자흡광도법, 미국과 JECFA는 두 가지 방법을 모두 사용하였다. 비술폰화방향족제 1급 아민의 함량은 분석시료 모두 $0.0005\%$(aniline으로서)이하로서 규격기준($0.01\%$이하)에 모두 적합하였다.

여러 기관의 일반시험법에 의한 식용 타르색소의 규격 비교 시험 (Comparison of General Test Methods of Various Organs on Synthetic Food Colors)

  • 신동화;김용석;이영환;방정호;엄애선;신재욱;이달수;홍기형;박성관;최장덕;김희연
    • 한국식품위생안전성학회지
    • /
    • 제19권4호
    • /
    • pp.171-175
    • /
    • 2004
  • 국내에서 유통되는 식용 타르색소 9종에 대하여 한국, 일본, 미국 및 JECFA의 색소시험법에 따라 비교${\cdot}$시험하였다. 식용색소의 물불용물 함량은 각 기관의 시험법에서 차이가 없었으며, 모두 규격기준에 적합하였다. 식용색소 녹색제3호, 적색제3호, 청색제2호 및 황색제4호의 염화물 및 황산염 함량은 각 기관의 방법에 따라 약간 달랐지만 모두 규격기준에 적합하였고, JECFA와 미국방법에서는 분석하는데 시간이 더 많이 소요되었다. 비소 함량은 한국과 일본에서 비색법으로 비교하였으며, 규격기준이 미국 및 JECF와 달랐다. 중금속 함량은 모두 규격기준에 적합하였으나 한국은 비색법, 일본은 원자흡광도법, 미국과 JECFA는 두 가지 방법을 모두 사용하였다. 비술폰화방향족제 1급 아민의 함량은 분석시료 모두 $0.0005\%$(aniline으로서)이하로서 규격기준($0.01\%$이하)에 모두 적합하였다.

시약 변경 시 모집단 분포 추이에 따른 결과 분석 (Result Analysis according to Population Distribution Trends when Reagents are Changed)

  • 박혜미;임수연;유선희;이선호
    • 핵의학기술
    • /
    • 제27권1호
    • /
    • pp.55-61
    • /
    • 2023
  • Purpose In this study, the monthly population distribution was calculated for statistical verification of 10 tests (CA19-9, CA15-3, testosterone, PTH, calcitonin, AFP, CEA, CA72-4, PSA, estradiol) with changed reagents, and the trend of change By comparing and analyzing the results, we want to verify the accuracy of the results and improve the reliability of the test. Materials and Methods From June 2021 to February 2023, for the 10 items in which the reagent was changed, the monthly percentage and standard deviation index before and after the reagent change were compared, respectively. At this time, the reference value was arbitrarily set for the comparison group in consideration of the reference value of the test item, and the groups were subdivided and compared, and the standard deviation index allowed range was -2.0 or more and 2.0 or less. Results For CA19-9, CA15-3, AFP, CEA, and calcitonin 5 test items, the change in monthly ratio in all test sections before and after the reagent change was kept constant. On the other hand, for CA72-4, PSA, testosterone, PTH, and estradiol items, the standard deviation index exceeded the acceptable standard after changing the reagent. CA72-4 test items showed an increasing trend in standard deviation index in the test section exceeding the reference value. In the case of the PSA test item, the maintenance ratio of 0.04 ng/mL was significantly decreased after changing the reagent. The testosterone test item had a standard deviation index of -2.5 in the test section exceeding 10.1 ng/mL after changing the reagent, and the standard deviation index of the PTH test item was out of the acceptable range in all test sections. It was confirmed that the estradiol test item showed an overall increase in the result value. Conclusion Through this study, the continuity and accuracy of the test results could be verified. It is considered that the stability of the test can be secured by analyzing the factors affecting the test result and solving the cause for the test item whose standard deviation index is out of the acceptable standard.

  • PDF

송전선로 보호용 보호계전기 시험을 위한 계통모델 개발에 관한 연구 (A Study of the Development of Power System Model for Performance Test of Transmission Line Protective Relay)

  • 서훈철;이홍학;김철환;이재욱;장병태;곽노홍;김호표;김일동
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 A
    • /
    • pp.430-432
    • /
    • 2004
  • The standard power system model is needed to test a transmission line protective relay There are two methods to develop a power system model for transmission line protection. First method is based on characteristic power system model, and second method is based on functional power system model. This paper presents a standard power system model for performance test of transmission line protective relay, where the power system model is based on the two methods. And this model is simulated by using RTDS to test a protective relay.

  • PDF

저전압 전원용 서지보호장치 철도 규격의 개선방안 (Improvement Plans of Railway standards for Surge Protective Devices used in Low-voltage Power circuits)

  • 정용철;김언석;이재호;조봉관;김재철
    • 조명전기설비학회논문지
    • /
    • 제16권2호
    • /
    • pp.90-97
    • /
    • 2002
  • 본 논문에서는 철도 시스템에서 사용하는 저압 전원용 서지보호장치(surge protective devices) 규칙의 성능평가 항목 및 성능개선 방안에 대하여 고찰하였다. 먼저 철도시스템 환경과 관련된 전자기장해(electromagnetic interference) 현상을 검토하였다. 그리고 국제규격인 IEC 및 IEEE와 평가항목 및 펑가방법 등을 비교 검토하였다. 검토 결과 국내 철도관련 규격은 국제규격과 비교하여 비교하여 발견하였다. 개선방안으로 서지 보호소자 단위의 시험은 삭제하고, 규격 종류는 전원용과 신호용으로 분리하며, 서지 파형은 국제적으로 인정된 것을 사용하도록 제안하였다. 철도용 저압 서지보호장치에 대해 서지제한전압 측정 및 서지 수명시험을 국제규격에 따라 시험한 결과 만족스러운 결과를 얻었다.

Advanced Indentation System을 이용한 천연가스배관 용접열영향부의 응력-변형률 변화 특성 분석 (Evaluation of Stress-Strain Characteristics of Weldment in Natural Gas Pipeline Using Advanced Indentation System)

  • 장재일;손동일;권동일;김우식;박주승
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집A
    • /
    • pp.483-488
    • /
    • 2001
  • Until now, the tensile properties of materials can be obtained just in accordance with conventional tensile testing methods which are described in several standards such as ASTM (American Society for Testing and Materials) standard and BS (British Standard). For some cases including on-service facility materials, however, the standard testing methods cannot be applicable due to the destructive testing procedure and specimen size requirement. Therefore, simple, non-destructive and advanced indentation technique was proposed. This test measures indentation load-depth curve during indentation and analyzes the mechanical properties related to deformation and fracture. In this paper, the research trend of non-destructive evaluation of tensile properties using AIS (advanced indentation system) and its application fields are reviewed and discussed.

  • PDF