• Journal of Environmental Health Sciences
• /
• v.41 no.3
• /
• pp.191-202
• /
• 2015

Objectives: Promotion of food safety/eradicating adulterated food has been listed as one of the four major issues recently identified for action by the Korean government. Due to the related seriousness, the food industry has been encouraged to take steps to restore consumer confidence. In order to set guidelines for the creation of manuals for the response to a food safety crisis by the food industry, this study provided a suggested organization for a crisis response team and operating procedures for crisis response activities. Methods: The prototypes of an organizational structure and a set of standard procedures for a crisis response system were provided. Results: The results of the study suggested that a crisis response team should be comprised of four divisions of responsibility: information analysis, site response, communication and operational support. The organization chart and the role and functions for each division of the crisis response team should be indicated. Response activities will be more effective when the team features multi-disciplined staffing, such as public relations, food safety/technology/quality, sales/marketing, purchasing, production, distribution/logistics, regulatory affairs/legal, and consumer service specialists. This study created a flow chart for the total crisis response system, which included crisis and normal situations. A crisis response team should be continuously operated for both crisis and normal conditions. This study also suggested a scenario to explain the procedures for crisis response activities. Conclusion: In order to cope more effectively with a food safety crisis, the organizational structure and its functions should be defined clearly, and a detailed set of standard procedures for response activities should be offered.

• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.3
• /
• pp.205-212
• /
• 2004

This paper proposes the variables repetitive group sampling plan where the quality characteristic following normal distribution has upper or lower specification limit. The problem is formulated as a non-linear programming problem where the objective function to minimize is the average sample number and the constraints are related to lot acceptance probabilities at acceptable quality level (AQL) and limiting quality level (LQL) under the operating characteristic curve. Sampling plan tables are constructed for the selection of parameters indexed by AQL and LQL in the cases of known standard deviation and unknown standard deviation. It is shown that the proposed sampling plan significantly reduces the average sample number as compared with the single or the double sampling plan.

• Journal of Acupuncture Research
• /
• v.21 no.1
• /
• pp.176-188
• /
• 2004

This study was carried out to investigate statistical validity of medical articles that used various statistical techniques such as t-test, analysis of variance, correlation analysis, regression analysis and chi-square test. For study 429 original articles using those statistical methods were selected from Journal of Korean Acupuncture & Moxibusition Society published from 1984 to 2002. 429 original articles were reviewed to analyzed the statistical procedures. Results are summarized as follows : 1. In this study 93 articles(21.68%) of 429 ones didn't report statement of statistical method in detail. 2. 53 articles(12.53%) didn't report p-value in correctly, and 245 articles(57.11 %) used mean${\pm}$standard error (Mean${\pm}$SEM.) and 109 articles used mean${\pm}$standard deviation(Mean${\pm}$SD.). All of 23 articles using nonparametric statistical techniques made an error to central tendency or dispersion. 3. 175 articles(59.93%) and 14 articles(4.79%) of 292 ones made an error to description of equal variances and normal distribution. 4. 99 articles(50%) of 185 ones misused t-test and 4 articles of 5 ones misused chi-square test. 5. 28 articles(73.68%) of 38 ones using discrete variable misused parametric technique such as t-test or ANOVA. 2 articles and 1 article of 125 ones choosing paired samples misused independent t-test and Mann-Whitney U test. 6. 20 articles using analysis of variance didn't use multiple comparison.

• Computers and Concrete
• /
• v.26 no.5
• /
• pp.385-395
• /
• 2020

The influence of combination of nano silica and silica fume, as partial cement replacement materials, on the properties of concrete has been studied through the measurement of compressive strength. The compressive strength of concrete in terms of mean, standard deviation and with-in-test coefficient of variation related to the variation in the nominated parameters have also been developed. The compressive strength data developed experimentally has been analyzed using normal-probability distribution and partial safety factors of composite concretes have been evaluated by using first order second moment approach with Hasofer Lind's method. The use of Nano silica and silica fume in concrete decreases the partial safety factor of concrete i.e., increase the reliability of concrete. The experimental results show that the properties of concrete having nano silica and silica fume in combination were better than that of a plain concrete. The SEM test results showing the level of Ca(OH)₂ in plain concrete and consumption level Ca(OH)₂ of concrete containing nano silica & silica fume have also been presented.

• International Journal of Contents
• /
• v.11 no.2
• /
• pp.20-30
• /
• 2015

We propose a new method that specifies objective image quality factors by evaluating an image quality measurement model using random images. In other words, No-Reference variables are used to evaluate the quality of an original image without using any reference for comparison. 1000 portrait images were collected from a web gallery with votes constituting over 30 recommendation values. The bottom-up data collecting process was used to calculate the following image quality factors: total range, average, standard deviation, normalized distribution, z-score, preference percentage. A final grade is awarded out of 100 points, and this method ranks and grades the final estimated image quality preference in terms of total image quality factors. The results of the proposed image quality evaluation model consist of the specific dynamic range, skin tone R, G, B, L, A, B, and RSC contrast. We can present the total for the expected preference points as the average of the objective image qualities. Our proposed image quality evaluation model can measure the preferences for an actual image using a statistical analysis. The results indicate that this is a practical image quality measurement model that can extract a subject's preferred image quality.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.4
• /
• pp.669-677
• /
• 2013

Quasi-Monte Carlo method is known to have lower convergence rate than the standard Monte Carlo method. Quasi-Monte Carlo methods are using low discrepancy sequences as quasi-random numbers. They include Halton sequence, Faure sequence, and Sobol sequence. In this article, we compared standard Monte Carlo method, quasi-Monte Carlo methods and three scrambling methods of Owen, Faure-Tezuka, Owen-Faure-Tezuka in valuation of multi-asset European call option through simulations. Moro inversion method is used in generating random numbers from normal distribution. It has been shown that three scrambling methods are superior in estimating option prices regardless of the number of assets, volatility, and correlations between assets. However, there are no big differences between them.

• Journal of Wind Energy
• /
• v.9 no.4
• /
• pp.47-56
• /
• 2018

This paper introduces an active power dependent standard characteristic curve, Q(P) to compensate for voltage variations due to the output of distributed generation. This paper presents an efficient control method of grid-connected inverters by comparing and analyzing voltage variation magnitude and line loss according to the compensation method. Voltage variations are caused not only by active power, but also by the change of reactive power flowing in the line. In particular, the system is in a relatively remote place in a coastal area compared with existing power plants, so it is relatively weak and may not be suitable for voltage control. So, since it is very important to keep the voltage below the normal voltage limit within the specified inverter capacity and to minimize line loss due to the reactive power. we describe the active power dependent standard characteristic curve, Q(P) method and verify the magnitude of voltage variation by simulation. Finally, the characteristics of each control method and line loss are compared and analyzed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.18 no.1
• /
• pp.4021-4037
• /
• 1976

This paper describes the actual experiments of the error propagation and studies of analytical photogrammetry using the simulation method in which we can find the causes of the errors. These studies and the results give the valuable data which are very effective for systematically controlling the errors in aerial triangulation. The main contents in my paper are as follows: 1. Dose the scale errors in the successive models in the form of normal distribution appear when the observation errors propagate in the form of normal distribution\ulcorner 2. In what form does this scale error propagation in the actual model appear\ulcorner 3. When the causes of the scale error propagation are found, is the evaluation standard determined normally\ulcorner 4. What degree of influence is there form the constant errors\ulcorner I have done several experiments using the simulation method technique to solve the complicated error propgation of aerial triangulation which is the effective means to research the relations between cause and effect. In this paper, the studies have concentrated on the following points of simulation experiments. (1) The first part descries how we can produce the soft program of the simulation experiment. (2) The second part is the method propagating the errors in the simulation models and the kinds of errors. (3) The final part is the most important; that is the analyzing and evaluation of control during actual work. From the above-mentioned points, it is said that these studies are a very important development in the field of controlling and managing aerial photogrammetry and especially in the case of error propagation, we can clearly find the causes of the errors and steps and parts of errors generated when we use these techniques.

• Korean Journal of Metals and Materials
• /
• v.49 no.4
• /
• pp.275-280
• /
• 2011

This paper focuses on reliability prediction of long-term creep strength for Modified 9Cr-1Mo steel (Gr. 91) which is considered as one of the structural materials of next generation reactor systems. A "Z-parameter" method was introduced to describe the magnitude of standard deviation of creep rupture data to the master curve which can be plotted by log stress vs. The larson-Miller parameter (LMP). Statistical analysis showed that the scattering of the Z-parameter for the Gr. 91 steel well followed normal distribution. Using this normal distribution of the Z-parameter, the various reliability curves for creep strength design, such as stress-time temperature parameter reliability curves (${\sigma}$-TTP-R curves), stress-rupture time-reliability curves (${\sigma}-t_{r}-R$ curves), and allowable stress-temperature- reliability curves ([${\sigma}$]-T-R curves) were reasonably drawn, and their results are discussed.

• Earthquakes and Structures
• /
• v.8 no.2
• /
• pp.379-399
• /
• 2015

Existing building structures can easily present material mechanical properties which can largely vary even within a single structure. The current European Technical Code, Eurocode 8, does not provide specific instructions to account for high variability in mechanical properties. As a consequence of the high strength variability, at the occurrence of seismic events, the structure may evidence unexpected phenomena, like torsional effects, with larger experienced deformations and, in turn, with reduced seismic performance. This work is focused on the torsional effects related to the irregular stiffness and strength distribution due to the concrete strength variability. The analysis has been performed on a case-study, i.e., a 3D RC framed 4 storey building. A Normal distribution, compatible to a large available database, has been taken to represent the concrete strength domain. Different plan layouts, representative of realistic stiffness distributions, have been considered, and a statistical analysis has been performed on the induced torsional effects. The obtained results have been compared to the standard analysis as provided by Eurocode 8 for existing buildings, showing that the Eurocode 8 provisions, despite not allowing explicitly for material strength variability, are conservative as regards the estimation of structural demand.