• Journal of Biosystems Engineering
• /
• 제23권6호
• /
• pp.591-598
• /
• 1998

Light intensity and spectral characteristics of different types of fluorescent lamps were tested to investigate their possibility as the artificial lighting sources for the close illumination applied in the transplant production factory. Photosynthetic photon flux densitiy(PPF), illuminance and irradiance for all lamps decreased logarithmically with an increase of the vertical distance from the lighting source. The fluorescent lamp specially designed plant growth (PG lamp) showed a maximum spectral irradiance at the wavelength of 660nm. However, it showed lower irradiance than that of a standard fluorescent lamp at the range of wavelength between 500 and 600nm. On the other hand, PG lamp showed higher PPF and lower illuminance than those of the standard fluorescent lamp. The maximum peak of spectral characteristics for both of the single and twin three-bind fluorescent lamps was shorn at the wavelength of 545m and the next peaks were shown at the wavelength of 610nm and 435nm, respectively. Since the red fluorescent lamp has a narrower peak at the wavelength of 660nm, it may be useful for the supplementary red lighting. For three of standard, single three-band and twin three-band fluorescent lamps, the values of conversion factor for converting illuminance to PPF fell within the narrow range from 76 to 791x/$\mu$molㆍm$^{-2}$ ㆍs$^{-l}$ . However, for PG lamp, it was 29.71x/$\mu$molㆍm$^{-2}$ ㆍs$^{-1}$. Also, the values of conversion factor for converting PPF to irradiance of fluorescent lamp used in this study ranged between 4.85 and 5.34$\mu$molㆍm$^{-2}$ ㆍs$^{-1}$/Wㆍm$^{-2}$ .

• 방송공학회논문지
• /
• 제15권4호
• /
• pp.461-473
• /
• 2010

최근 녹색 성장과 에너지 절감 방안이 크게 대두하면서 친환경과 절전형 광원으로 평가받는 LED 조명에 대한 관심이 급증하고 있다. 특히 LED 조명의 높은 효율성과 긴 수명, 소형 박형화에 따른 조명기구의 공간 효율성, 디지털 디밍(Dimming)에 의한 다양한 연출 효과 등의 장점이 있어 방송제작 현장에서도 미래 방송조명의 광원으로 기대되고 있다. 본 논문에서는 CIE의 기준에 따른 측광 방법으로 방송용 조명의 기본적인 광원특성을 용도별, 조명기구별로 측정하였다. 이를 바탕으로 기존 방송조명과 LED 조명의 분광분포 특성 및 연색성 등에 대한 비교 분석으로 LED 조명의 활용을 위한 기초자료를 확보하였다. 한편, 그림자 투영 실험과 색 재현성 실험을 통하여 LED의 새로운 광원에 의한 TV 조명이 고품질을 요구하는 방송영상에 미치는 영향과 문제점에 대한 개선방안을 제안한다.

• 한국수소및신에너지학회논문집
• /
• 제34권2호
• /
• pp.205-211
• /
• 2023

Hydrogen gas is light and diffuses very quickly. Therefore, when a leakage accident occurs, the damage is great, so a technology that can quickly measure the leakage in the air at a long distance is needed. In order to develop hydrogen gas leaked in the atmosphere in a non-contact manner, an experiment was performed to measure hydrogen gas using a lidar technology using the Raman effect. Hydrogen Raman signals were detected using a UV LED light source, which is a Raman light source, and a spectrometer in the ultraviolet region including an optical filter in the 400-430 nm band. To develop this, a Raman lidar optical structure was designed to measure the hydrogen Raman signal at a certain distance, and the hydrogen Raman spectrum was confirmed using a standard gas to evaluate the performance of this optical structure. The linearity was found to be 0.99 using hydrogen standard gas (10, 50, 100, 500, 1,000 ppm). Accordingly, a Raman lidar capable of measuring hydrogen gas rapidly diffusing in the air in an open state was developed to improve the limitations of existing hydrogen sensors.

• 한국정밀공학회지
• /
• 제21권3호
• /
• pp.38-43
• /
• 2004

This paper describes the construction of a circular polariscope. Generally, a circular polariscope contains four optical elements and a light source. The first element following the light source is called the linear polarizer. It converts the ordinary light into plane-polarized light. The second element is a quarter wave plate which converts the plane-polarized light into circularly polarized light. Following the quarter wave plate, a specimen made of transparent photoelastic material is located in a loading device. The second quarter wave plate is set and the last element is the analyzer. These polarizing elements, two quarter wave plates and two linear polarizing filters, were purchased from the USA. Frames and other structures for holding polarizing filters were machined and assembled to be rotated. Light box, which includes four incandescent lamps and two sodium-vapor lamps, was made. In order to proof the function of the newly built polariscope, Tardy compensation test was applied to a rectangular shaped specimen made of poly-carbonate material (PSM 1). The error of the fringe constant, which was measured by the newly built polariscope, was within 4.4 percent compared to the standard value of this material. It is possible to make a good quality of polariscope if accurate polarizing filters will be used.

• 한국광학회지
• /
• 제32권1호
• /
• pp.15-21
• /
• 2021

본 논문에서는 LED 광원 모듈과 시준용 프레넬 렌즈를 이용하여 항공기 장애등 광학 시스템을 설계하였다. 설계된 광학계는 국토 교통부 항공기 경고등의 수직 양각 중심 광도 20,000 cd와 발산각 광도 규격 조건을 만족시키기 위해 프레넬 렌즈를 모듈별로 설계하였다. 또한 LED 광원 모듈과 프레넬 렌즈의 위치와 기울기를 조정하여 광학 시스템을 최적화하였으며, 이렇게 설계된 광학계의 배광 특성을 분석하고 비교하여 최적의 성능을 가진 항공기 경고등 광학계를 설계하였다.

• 한국자동차공학회논문집
• /
• 제21권4호
• /
• pp.159-165
• /
• 2013

One of the leading causes of night time automobile accidents is the darkness of surroundings. Headlamps play a critical role in casting light and providing drivers with visibility. Headlamp design and new technology have been developed recently as research has been actively carried out to increase headlamp recognition. This study statistically analyzes irradiation distance using computer simulation by categorizing headlamps applied in domestic automobiles in the last decade by year, light source, form, vehicle type, and height of installation. After analyzing results of irradiation distance, it appears irradiation distance has been increased by approximately 10m in the last decade. This increase in irradiation distance is predicted to decrease night time accidents by allowing more time to recognize potential causes of accidents.

• 한국정보통신학회논문지
• /
• 제18권2호
• /
• pp.445-451
• /
• 2014

이중 LED 등명기는 하나의 등명기에 두 개의 광원을 구성하여 주 광원 고장 시 예비광원으로 운용이 가능한 장비이다. 그러나 이중 LED 등명기의 운용을 위한 국내 표준 규격이 정의되어 있지 않아 현재 사용 중인 국내 표준 규격 프로토콜을 적용하면 예비 광원 동작시에는 상태정보를 얻거나 광원을 제어할 수단이 없다. 이와 관련하여 본 논문에서는 이중 LED 등명기의 제어 시스템을 위해 국내 표준 규격 프로토콜을 근간으로 한 확장된 등명기 프로토콜을 제안하였다. 또한 제안한 프로토콜을 구현한 후 개발한 제어 시스템을 통하여 이중 LED 등명기의 정상작동 여부를 확인하였다. 본 논문에서 제안하고 구현한 제어 시스템은 이중 LED 등명기의 작동 상태를 확인하고 동작을 제어할 수 있을 뿐만 아니라 기존에 운용중인 LED 등명기의 제어 시스템으로도 이용할 수 있도록 그 기능을 확장하고 시험하였다.

• 한국자동차공학회논문집
• /
• 제16권1호
• /
• pp.8-13
• /
• 2008

Emissions from automobiles have long been considered a prime source of pollutants involved in smog formation and ozone production. Especially VOCs are associated with serious environmental problems such as photo-chemical smog as well as human health effects. Since motor vehicles are a major source of VOCs, estimating of emission from mobile source is the most important factor to control VOCs. VOCs are emitted from various pollution like motor vehicles, mobile and stationary source that has characteristics of toxicity, cancer-causing, bio-accumulation, durability in air and diffusion can exert a bad influence upon human health and environment. However we don't have any standard or regulation about VOCs emissions. This study is summarized as VOCs emission characteristics from in-use light-duty diesel and LPG fueled vehicles. The vehicle exhaust-gas test mode is CVS cycle and nier-10 cycles that developed on EPA and National Institute of Environmental Research. TO-14 method (Toxic Organic) was chosen for VOCs analysis from EPA in USA. This study results will be useful when make a emission factor and rule making of emission standard about domestic VOCs emission for the improve to air condition.

• 한국조명전기설비학회지:조명전기설비
• /
• 제10권5호
• /
• pp.43-51
• /
• 1996

박물관에서 조명에 의한 전시물의 손상이 일어나는 것을 최소화하기 위해서 적절한 조명 기준이 요구된다. 이러한 조명 기준의 작성을 위한 기초 자료를 얻기 위하여, 방사에너지의 파장의 함수로 전시물의 변색을 측정할 수 있는 장치를 구성하였다. 크세논 램프를 광원으로 사용하고, 빛은 여러 가지 차광 필터를 통과하여 시료에 입사한다. 여러 차광 필터 밑의 시료의 색을 측정함으로써 특정 파장 범위의 방사 에너지에 의한 사료의 변색을 추정하였다. 측정 결과, 식물 염료들은 단시간에 심한 변색을 보였으나, 전래 종이는 상대적으로 거의 변색이 되지 않았다. 측정 결과를 이용하여 다른 광원에 의한 변색을 예측할 수 잇으며, 이는 조명 기준 작성의 근거가 된다.

• Environmental Engineering Research
• /
• 제13권3호
• /
• pp.136-140
• /
• 2008

$TiO_2$ photocatalyst has been known to exhibit a notable disinfecting activity against a broad spectrum of microorganisms. A lot of commercial $TiO_2$ photocatalyst products have been developed for antimicrobial purposes. However, a standard method has not yet been proposed for use in testing antimicrobial activity. In this study, we developed a $TiO_2$ photocatalytic adhesion test method with film as the standard testing method for the evaluation of antimicrobial activity. This method was devised by modifying the previous antimicrobial products test method, which has been widely used, and considering the characteristics of $TiO_2$ photocatalytic reaction. The apparatus for testing the antimicrobial activity was composed of a Black Light Blue (BLB) lamp as UV-A light source, a Petri dish as the cover material, and a polypropylene film as the adhesion film. The standard $TiO_2$ photocatalyst sample, Degussa P25 $TiO_2$ - coated glass, could only be used once. The optimal initial concentration of the microorganism, proper light intensity, and light irradiation time were determined to be $10^6$ CFU/mL, 1.0 mW/$cm^2$, and 3 hr, respectively, for testing and evaluating antimicrobial activity on the $TiO_2$ surface.