• 제목/요약/키워드: Standard fire curve

검색결과 62건 처리시간 0.032초

철도차량별 표준 설계화재곡선 연구 (Study of Standard Design Fire Curve of Various Railcar)

  • 이덕희;박원희;정우성;김치훈
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.1426-1431
    • /
    • 2011
  • A study on the standardization of design fire HRR(heat release rate) curve was conducted for various railcar from the fire simulation or the fire tests. These standard curves are listed on the tunnel fire safety manual which will be used for the QRA(quantitative risk analysis) process of the long railway tunnels. The design fire curve is based with four simple factor representing the key of fire curve characteristics. Flashover time, maximum HRR and burn out time are the key factors of the design fire curve. Specially total heat release is decided by the burnable material amount in the car.

  • PDF

표준화재곡선을 이용한 잔존부착강도 평가 간략방법 제안 (Simplified Evaluation Method for Residual Bond Strength of Reinforced Concrete Using Standard Fire Curve)

  • 문도영
    • 한국방재학회 논문집
    • /
    • 제10권5호
    • /
    • pp.41-47
    • /
    • 2010
  • 화해를 입은 구조물의 안전성 확보에는 초기대응이 매우 중요기 때문에 신속한 의사결정이 필요하다. 본 논문에서는 화해를 입은 구조물의 이형철근과 콘크리트 간 잔존부착강도를 평가할 수 있는 간략화된 방법을 제시하였다. 제안된 방법은 화재강도 즉, 화재 중 최고노출 온도 뿐 아니라 화재지속시간도 고려할 수 있도록 하였다. 제안된 방법의 검증 및 비교를 위하여 화해를 입은 대구지하철 역사의 현장조사 결과를 인용하였으며, 해석결과 그 효용성을 확인하였다.

지하주차장의 내화성능 평가를 위한 차량연소실험 (The combustion test of assuming in parking space for fire resistance)

  • 강승구;김동준;이재영;原田和典;권영진
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2013년도 춘계 학술논문 발표대회
    • /
    • pp.48-50
    • /
    • 2013
  • In this study, Car fire for test using ISO 9705 10MW Large Scale Calorimeter. Especially, study on the underground parking for the fire resistance performance. The underground parking lot of the fire resistance regulations in according to with the standard heating curve in Korea. Because of this burning car through experiments to the propose a new heating curve.

  • PDF

Simplified P-M interaction curve model for reinforced concrete columns exposed to standard fire

  • Lee, Deuck Hang;Cheon, Na-Rae;Kim, Minsu;Lee, Jungmin;Oh, Jae-Yuel;Kim, Kang Su
    • Computers and Concrete
    • /
    • 제19권5호
    • /
    • pp.545-553
    • /
    • 2017
  • In the authors' previous study, an axial force-flexural moment (P-M) interaction curve model was proposed to evaluate fire-resisting performances of reinforced concrete (RC) column members. The proposed method appeared to properly consider the axial and flexural strength degradations including the secondary moment effects in RC columns due to fire damage. However, the detailed P-M interaction curve model proposed in the authors' previous study requires somewhat complex computational procedures and iterative calculations, which makes it difficult to be used for practical design in its current form. Thus, the aim of this study was to develop a simplified P-M interaction curve model of RC columns exposed to fire considering the effects of fire damage on the material performances and magnitudes of secondary moments. The simplified P-M interaction model proposed in this study was verified using 66 column fire test results collected from literature, and the verification results showed that the proposed simplified method can provide an adequate analysis accuracy of the failure loads and fire-resisting times of the RC column specimens.

화재에 의한 지하공동구의 온도 및 응력해석 (Temperature and Stress Analysis of Box Culvert in Fire)

  • 김현준;임초롱;유현경;정철헌
    • 한국안전학회지
    • /
    • 제26권6호
    • /
    • pp.31-44
    • /
    • 2011
  • This paper has presented a finite element analysis of structural behaviour of box culvert during and after fires. The fire tests were carried out in a furnace on RC slabs using the ISO 834 standard fire curve. The load capacity after cooling of the RC slab that was not loaded during the fire tests was evaluated by means of additional 3 points bending tests. In the past, stress-strain models of concrete under fire loading have been proposed by several researchers. Comparisons are made with the load-displacement relations of RC slabs after fire loading using the existing stress-strain models with temperature, such as Schneider, EUROCODE 2, Lie, Shi and Nan model. By comparing the load-displacement relations, Lie model was found to result in a maximum load about 2.0% higher than that of test. Based on the fire test results of RC slabs, this paper presents an extensive analytical study on the fire response of box culvert during and after fires.

비재하 가열에 의한 무내화피복 CFT 기둥의 잔존내력 예측에 관한 연구 (A Study on the Prediction of Residual Strength of Concrete Filled Steel Tube Column without Fire Protective Coating by Unstressed Heating)

  • 김규용;이형준;이태규;김영선;강선종
    • 한국화재소방학회논문지
    • /
    • 제23권3호
    • /
    • pp.31-39
    • /
    • 2009
  • 최근 고층건물의 화재안전성에 대한 문제점이 사회적으로 부각되어지고 있으며, 이러한 고층 건물에 다수 사용되고 있는 CFT기둥 부재에 대한 내화성능을 정량적으로 평가하는 방법이나 기준들이 마련되지 않은 상황이다. 이에 본 연구에서는 고강도 콘크리트를 충전한 CFT 단주를 제작하여 내화실험을 실시하고, 화재시 내화성능평가 및 비정상온도분포해석을 이용한 해석을 수행하여 온도분포해석의 모델링을 제안할 수 있었다. 이것을 기초로 CFT Stub Column의 고온특성 평가결과를 활용하여 화재시 내화시간에 따른 CFT기둥의 잔존내력 예측식을 유도할 수 있었다.

화재피해를 입은 RC 슬래브의 재하실험에 관한 연구 (A Study on the loading test for of slab by Fire damaged)

  • 이규민;강승구;김동준;권영진
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2013년도 추계 학술논문 발표대회
    • /
    • pp.50-51
    • /
    • 2013
  • In case of Korea, it goes frequently that underground parks has been burned. Based on standard temperature time curve(ISO-834), gerber, walls, slab of structures are constructed. However, Standard temperature time Curve is not considered that buildings are affected by vehicle fire. that is why it has the hazard that makes building reinforcement feeble. Based on the result that got from vehicle experiment before, we made four RC slab in this experiment and set the fire severity. according to the loading experiment after heating, we measured the effects that makes reinforcement and shape changes. Furthermore, we examined the safty of the structure by comparing before and after heating.

  • PDF

터널의 내화성능 평가용 화재온도곡선과 화재모델별 내화시간에 대한 고찰 (A study on the deterministic temperature-time curves and required resistance times by fire model for assessment of fire resistance of tunnel structures)

  • 김효규;박경환;윤명오;이창우
    • 한국터널지하공간학회 논문집
    • /
    • 제7권2호
    • /
    • pp.165-176
    • /
    • 2005
  • 최근 전세계의 대형화재 사고이후, 터널안전에 관한 많은 연구들이 진행되고 있다. 특히 실물 및 축소모형 실험에 대한 다양한 연구가 진행되면서, 터널구조물에 대한 내화성능에도 많은 관심이 모아지고 있다. 이미 외국에서는 터널구조물의 내화성능에 대한 설계기준이나 권고안이 발표되고 있으나, 아직 국내에는 설계기준으로 마련되지 못하고 있다. 본 연구의 목적은 각 나라별 화재온도 (온도-시간) 곡선, 특히 ISO 834 표준온도곡선, HC곡선, RWS곡선, ZTV곡선, EBA곡선을 분석하여 국내의 도로, 지하철 및 철도터널의 내화성능 평가 기준에 적합한 화재특성을 도출하는데 있다.

  • PDF

터널 화재(Modified Hydrocarbon Curve)시콘크리트에 매입된 강재의 열적 손상 평가 (Evaluation on the Thermal Damage of Steel Embedded in Concrete in Tunnel Fire(Modified Hydrocarbon Curve))

  • 박경훈;김흥열;김형준
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
    • /
    • pp.485-488
    • /
    • 2008
  • 터널 화재시 화재강도는 매우 높으며 터널 내부에서 화재 발생은 높은 화재강도에 의해 구조요소인 숏크리트 및 콘크리트 라이닝의 화재 노출표면에서 폭열 발생을 유발시키는 동시에 터널 안정에 있어 중요한 역할을 수행하는 앵커 등의 터널에 매입된 강재 또한 고온의 노출로 인한 열전달로 급격한 응력감소가 발생하게 된다. 따라서 본 실험에서는 화재강도(Modified Hydrocarbon Curve)와 매입된 강재의 내화 유무를 변수로 정하여 콘크리트 라이닝의 내부에 매입된 강재의 열전도를 알아보기 위한 화재시험을 수행하였다. 또한 최근 ITA(International Tunneling Association)에서 연구한 도로 터널내화구조 기준에 따라 강재의 열손상 임계 온도범위를 산정하여 열적 손상 정도를 평가하였다.

  • PDF

도로터널내 화재에 따른 터널구조체의 안정성 평가를 위한 시간-온도곡선의 적용 (Applied Time-Temperature Curve for Safety Evaluation in the Road Tunnel by Fire)

  • 원종필;최민정;장창일;이상우
    • 대한토목학회논문집
    • /
    • 제29권5A호
    • /
    • pp.551-555
    • /
    • 2009
  • 본 연구는 도로터널 내 화재시 콘크리트 구조체의 내화성능을 평가하기 위한 기준을 제시하고자 실시하였다. 현재 국내에서는 지형특성 및 환경친화적인 도로건설로 도로 터널의 수가 빠른 속도로 증가하며, 터널연장이 길어짐에 따라 터널 내 화재사고가 갈수록 높아지고 있는 상황이다. 하지만 우리나라에서는 터널 화재에 대한 적합한 시간-온도 곡선을 규정하지 못하고 있는 실정이다. 따라서 본 연구에서는 국내 도로의 통행량, 차량 종류등을 고려한 열방출율을 기초로 외국에서 제시된 시간-온도 곡선을 검토해 보았으며 적합한 설계화재 모델을 적용하였다. 또한 적용된 도로터널의 설계화재모델에 따른 수치해석을 통하여 터널 구조체의 화재시 성능을 검토하였다.