• Journal of the Korea Safety Management & Science
• /
• v.18 no.4
• /
• pp.99-105
• /
• 2016

This study was conducted to develop a dummy in an environment similar to the human body, to prepare a standard for evaluation and to present the process of the production in order to evaluate the performance of the robot that can detect the persons needing rescue in a confined space, who are difficult for fire-fighting officials to rescue in case of fire and disaster. As a result, a standard for evaluation was developed and standardized into four parts 'Normal,' 'Risk Stage 1,' 'Risk Stage 2' and 'Risk Stage 3'based on the number of breath cycles, carbon dioxide concentration, core temperature and criteria for hearing to recognize the voice. In addition, in order to produce a dummy, fever, breathing capacity and voice output function were compared and analyzed. This study has significance that it built up basic data of the method of producing the actual dummy, by presenting characteristics and controlling methods using the waterproof insulation heating coil for the function, solenoid valve for the consecutive output of breathing capacity and USB program sound board for voice output.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.104-113
• /
• 2013

New USNCAP has been carried out by NHTSA including front and side crash from MY2011. In this paper, test results for USNCAP Side crash were reviewed by statistical analysis. This review focused on side crash test results to investigate the effect of changes from new USNCAP side crash test protocol among 30 passenger cars. These results were summarized as followings. Total number of 5 star vehicles on the front seat dummy (16 vehicles, 53.3%) was slightly smaller than the rear seat's (17 vehicles, 56.7%) in MDB test. For the ES-2re dummy, chest injury, ie maximum rib deflection contributed to 66% in the mean value of $P_{joint}$. Pelvis injury was highly dependent upon performance up to 87% in the SID-IIs dummy cited on the rear seat in average $P_{joint}$. For Pole test, pelvis injury made contribution to the average performance to 83%. For standard deviation, it showed the largest value in the same body region as the mean value for each dummy. Overall front seat performance showed 14 vehicles, 44.6% with 5 star vehicles less than each MDB or Pole test result. This result showed that performances in MDB test were different pattern to Pole test on driver position. Number of 5star vehicles for overall side NCAP performance are 18 passenger cars (60%). Curtain airbag and driver thorax airbag were equipped in all test vehicles. One vehicle is equipped with thorax airbag in the rear seat. Results from two side tests considered as reliability problem, ie the cause for large standard deviation in side crash test. Consequently, the countermeasure for new USNCAP side crash test is essential to design the effective side structures for side collision and to control well dummy kinematics with curtain and thorax airbag in order to reduce chest and pelvis injuries.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.18-30
• /
• 2010

As the automobile industry is developing, the number of deaths and injuries has increased. To reduce the damages from automobile accidents, the government of each country proposes experimental conditions for reproducing the accident and establishes the vehicle safety regulations. Automotive manufacturers are trying to make safer vehicles by satisfying the requirements. The Hybrid III crash test dummy is a standard Anthropomorphic Test Device (ATD) used for measuring the occupant's injuries in a frontal impact test. Since a real crash test using a vehicle is fairly expensive, a computer simulation using the Finite Element Method (F.E.M.) is widely used. Therefore, a detailed and robust F.E. dummy model is needed to acquire more accurate occupant injury data and behavior during the crash test. To achieve this goal, a detailed F.E. model of the Hybrid III 5th percentile female dummy is constructed by using the reverse engineering technique in this research. A modeling process is proposed to construct the F.E. model. The proposed modeling process starts from disassembling the physical dummy. Computer Aided Design (CAD) geometry data is constructed by three-dimensional (3-D) scanning of the disassembled physical dummy model. Based on the geometry data, finite elements of each part are generated. After mesh generation, each part is assembled with other parts using the joints and rigid connection elements. The developed F.E. model of dummy is simulated based on the FMVSS 572 validation regulations. The results of simulation are compared with the results of physical tests.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.3
• /
• pp.176-183
• /
• 2015

This research proposes a method to estimate the fatigue life of SSD(solid-state drive) due to the effect of dummy solder ball under forced vibration. A finite element model of the SSD was developed to simulate the forced vibration and a modal testing was performed to verify the developed finite element model. Fatigue life of the SSD under vibration was experimentally determined according to JEDEC standard in which the SSD was excited by a sinusoidal sweep vibration within the narrow frequency band around the first natural frequency until the SSD fails. Basquin's equation was introduced to estimate the fatigue life of the SSD due to the effect of dummy solder balls. It shows that the dummy solder balls are effective elements of the SSD to increase the fatigue life of an SSD by increasing 700 times of the fatigue life of the given SSD.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.5
• /
• pp.81-87
• /
• 2012

New car assessment program (NCAP) originated from USNCAP in 1979 has been implemented in several countries or markets, for instance USA, Europe, Korea, Japan, China and Australia. NCAP has contributed greatly to reduce accidental tolls. But recently, NCAP performance has no distinction between cars because manufacturer have been continuously developed to improve NCAP performance. Therefore, NHTSA announced new USNCAP protocol becoming effective from MY2011. NHTSA had carried out many NCAP tests based on the new test protocol and announced these test results. In this paper, USNCAP test results were reviewed by statistical method. This review was focused on passenger cars and frontal crash test results in order to investigate effect of changes in new NCAP protocol. There are two key changes, one is sited female dummy in passenger position, the other is enlarged to 4 scoring body regions in each dummy. Results of this review were summarized as followings. Performance in Passenger (12.5%) is lower than Driver's (50%) for number of 5 star vehicle. Neck injury criterion is dominant to NCAP star rating for both dummies in the mean sense. For standard deviation, chest deflection is showed largest value in driver dummy but neck injury criterion is showed for passenger's. DKAB and PKAB were equipped 28.1% and 6.2%, respectively. Consequently, the countermeasure for new USNCAP frontal crash test is essential to control well dummy kinematics with some safety features including KAB to reduce neck injuries.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.3
• /
• pp.32-37
• /
• 2018

Recently, the driver can be assisted by the advanced active safety devices such as ADAS from road traffic risks. With this system, driver and passenger may freed from can driving tasks or kept eyes on forward direction while on the road. Help from adoptive cruise control, auto parking and newly develped automated driving vehicles technologies, the driver positions will vary significantly from the current standard driver position during the travel time. On this hypothesis, the objective of this study is analyze the behavior and injuries of drivers in the event of frontal impact under these abnormal driver position. Based on the KNCAP frontal impact testing method, this simulation matrix was set-up with dummies of 5 th tile female Hybrid III dummy and 50 th tile male Hybrid III dummy. The small sedan type passenger car was modeled in this simulation. The series of simulation was performed to compare the injuries and behaviour of each dummy, varying the seating status and seat position of each dummy.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.4
• /
• pp.420-427
• /
• 2015

This paper statistically reviewed for the USNCAP frontal crash test results carried out by NHTSA. Vehicle samples were selected on total 20 vehicles which were included on 15 vehicles for MPV&SUV and 5 Pickup. The results was summarized as followings. The performance for the driver was better than the passenger's in the average sense. There exist distinctions between the driver and the passenger on the USNCAP front test procedure, for example dummy size, seating position and airbag style. Therefore these differences originated in the statistical results. Main effect was Neck injury for crash performance on both dummies on the average value. Root cause of neck injury was different for each dummy, ie, the driver caused from Nte & Ntf, but the passenger did absolutely Nte mode. Reliability evaluated from the standard deviation was highly dependent upon chest injury on the driver and neck injury on the passenger. Restraint system was also summarized.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.1
• /
• pp.30-35
• /
• 2019

KIDAS (Korean In-Depth Accident Study) is a data structure of accident investigation type, vehicle breakage and human injury database. A consortium of research institutes, universities, and medical institutions has been established and operated. KIDAS has the strongest difference from the TAAS (Traffic Accident Analysis System), which is the data of the National Police Agency, that it can grasp the injury information of passengers. In this study, the mean age and weight of the most frequent accident types in the KIDAS accident statistics were calculated to determine the degree of injury according to gender. Through the MADYMO analysis, it is aimed to grasp the difference of dummy injury using commercial dummy models and scaling models are currently used.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.4
• /
• pp.288-293
• /
• 2014

The IEC standard for onshore or offshore wind turbines requires additional dummy simulations (at least 5 s) for the transient responses due to initial conditions. An increase in the dummy time causes a considerable increase in the computational cost considering multiple design spirals with several thousand design load analysis cases. A time of 30 s is typically used in practical simulations for a wind turbine design with a fixed platform. However, 30 s may be insufficient for floating offshore wind turbines (FOWT) because the platforms have lower natural frequencies, and the transient responses will last much longer. In this paper, an initial condition application algorithm is implemented for WindHydro, and the appropriate dummy simulation time is investigated based on a series of dynamic simulations of a FOWT. As a result, it is found that more than 300 s is required for the platform to have stationary motion after the initial transient responses for the FOWT under the conditions considered.

• Journal of the Korean Home Economics Association
• /
• v.49 no.4
• /
• pp.105-113
• /
• 2011

The purpose of this study was to develop the pattern of scuba diving suits for local men in their thirties by using 3D body-scanned data. It is widely acknowledged that draping method is more suitable than flat pattern for body shape as most scuba diving suits in the market are designed to fit the body tightly in a single piece with sleeves and legs. A dummy for this study was made based on men's standard clothing sizes in 30's which was derived from data of 2004 Size Korea. Accordingly, the basic body block was built upon through draping method. Next, a scuba diving suit was made from neoprene, followed by fit and the clothing pressure tests in order to evaluate the diving suit's functionality and comfort. The results of the fit test had high points of 4.33 in majority parts except armhole and crotch ones. In comparison of clothing pressure between wearer and dummy, the clothing pressure of wearer was indicated relatively low in most parts other than armhole and knee, resulting from cushion function of skin and muscle and high stretch of fabric.