• Mass Spectrometry Letters
• /
• 제5권2호
• /
• pp.57-61
• /
• 2014

A gravimetric standard addition method combined with internal standard calibration has been successfully developed for the accurate analysis of total arsenic in a laver candidate reference material. A model equation for the gravimetric standard addition approach using an internal standard was derived to determine arsenic content in samples. Handlings of samples, As standard and internal standard were carried out gravimetrically to avoid larger uncertainty and variability involved in the volumetric preparation. Germanium was selected as the internal standard because of its close mass to the arsenic to minimize mass-dependent bias in mass spectrometer. The ion signal ratios of $^{75}As^+$ to $^{72}Ge^+$ (or $^{73}Ge^+$) were measured in high resolution mode ($R{\geq}10,000$) to separate potential isobaric interferences by high resolution ICP/MS. For method validation, the developed method was applied to the analysis of arsenic content in the NMIJ 7402-a codfish certified reference material (CRM) and the result was $37.07mg{\cdot}kg^{-1}{\pm}0.45mg{\cdot}kg^{-1}$ which is in good agreement with the certified value, $36.7mg{\cdot}kg^{-1}{\pm}1.8mg{\cdot}kg^{-1}$. Finally, the certified value of the total arsenic in the candidate laver CRM was determined to be $47.15mg{\cdot}kg^{-1}{\pm}1.32mg{\cdot}kg^{-1}$ (k = 2.8 for 95% confidence level) which is an excellent result for arsenic measurement with only 2.8 % of relative expanded uncertainty.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.299-303
• /
• 2016

Prompt gamma activation analysis using a thermal neutron-guided beam at Japan Atomic Energy Agency JRR-3M was applied for the precise determination of Si in silicon nitride ceramic reference materials [Japan Ceramic Reference Material (JCRM) R 003]. In this study, the standard addition method coupled with internal standard was used for the nondestructive determination of Si in the sample. Cadmium was used as internal standard to obtain the linear calibration curves and to compensate for the neutron beam variability. The analytical result of determining Si in JCRM R 003 silicon nitride fine powder ceramic reference materials using prompt gamma activation analysis was in good agreement with that obtained by classical gravimetric analysis. The relative expanded measurement uncertainty (k = 2) associated with the determined value was 2.4%.

• Bulletin of the Korean Chemical Society
• /
• 제25권2호
• /
• pp.233-236
• /
• 2004

Total impurity analysis of a primary standard solution is one of the essential procedures to determine an accurate concentration of the standard solution by the gravimetry. Bi impurity is determined in Pb standard solutions by inductively coupled plasma mass spectrometry (ICP-MS). The direct nebulization of the Pb standard solution produces a significant amount of the Pb matrix-induced molecular ions which give rise to a serious spectral interference to the Bi determination. In order to avoid the spectral interference from the interferent $^{208}PbH^+$, the hydride generation method is employed for the matrix separation. The Bi hydride vapor is generated by reaction of the sample solution with 1% sodium borohydride solution. The vapor is then directed by argon carrier gas into the ICP after separation from the mixture solution in a liquid-gas separator made of a polytetrafluoroethylene membrane tube. The presence of 1000 ${\mu}$g/mL Pb matrix caused reduction of the bismuthine generation efficiency by about 40%. The standard addition method is used to overcome the chemical interference from the Pb matrix. Optimum conditions are investigated for the hydride-generation ICPMS. The detection limit of this method is 0.5 pg/mL for the sample solutions containing 1000 ${\mu}$g/mL Pb matrix.

• 산업공학
• /
• 제6권2호
• /
• pp.91-101
• /
• 1993

Developed in this paper is a standard time data for shirt sewing operations in the apparel-making industry. Since this data is made of formula developed for each unit operation and includes the formula for the machine time calculation, users could use it for obtaining the normal or standard time without any special efforts. In addition, this data handles the variations due to the design changes of a shirt through the parameters in the formula. compared with the MTM-1. The standard time data developed is shown to be easier and faster in determining the standard time with acceptable accuracy.

• 한국식품조리과학회지
• /
• 제29권6호
• /
• pp.841-846
• /
• 2013

Developing a menu for foodservice operations utilizing a Yaksun meets with the desire of customers who have keen interest in health food. In addition, it is possible to expect the additional advantage of decreasing hygiene risk, which can be caused by large quantity cooking, by the efficacy of medicinal herbs used in Yaksun. Accordingly, this study provides with basic information for the development of a Yaksun menu for foodservice operations utilizing Gwackhyang by evaluating the sensory quality and microbiological quality of bean soup added of Gwackhyang. The standard plate counting significantly decreased as the addition quantity of Gwackhyang increased (p<0.001). All bean soups, which were kept at room temperature and refrigerator for 3 hours after cooking, met the safety standard 5.00 CFU/g. The number of coliforms also significantly decreased as the addition quantity of Gwackhyang increased. The bean soups in control group exceeded the safety standard of 2.00 CFU/g after 1 hour at room temperature and in refrigerator. On the other hand, all Gwackhyang bean soups met safety standard, only excluding G1 with 1% Gwackhyang kept at room temperature. Accordingly, it has been confirmed that the addition of Gwackhyang during bean soup production decreases the microorganism level of bean soup. Both standard plate counting and the number of coliforms significantly increased after 3 days in refrigerator; however, the increasing extent of Gwackhyang bean soups were less than the control group bean soups. The control group received scored highest in 3 sensory characteristics out of 5 sensory characteristics. However, G1 with 1% Gwackhyang also scored highest in 2 sensory characteristics, which were taste and overall preference. G2 also scored 4.45 in color and 4.15 in fragrance, which were lower than the control group but were above average.

• Journal of Preventive Medicine and Public Health
• /
• 제19권1호
• /
• pp.76-84
• /
• 1986

Analyses of lead and zinc were made by means of standard addition method using atomic absorption spectrophotometer(Baird Ltd., Model A5100) with flameless method for lead and flame method for zinc. The blood samples used were merely diluted with triton x-100, because it was simple, rapid and minimal risk of contamination. Mean recovery rate for lead added to the blood ranged from 97.7 to 101.3% with coefficient of variation ranging from 1.9 to 10.7%, and that for the added zinc ranged from 99.0 to 102.2% with coefficient of variation ranging from 2.1 to 9.1%. In repeated measurements of zinc in the blood, good reproducibility and interindividual variation were proved(p<0.01). In comparison of the lead and zinc concentrations in the blood determined by the standard addition method and standard method, there were good correlations between 2 sets of data (r=0.9731 for lead and r=0.9785 for zinc), although lead levels were estimated higher by the former method(p<0.01) and zinc levels by the latter method(p<0.01). It can be concluded that lead and zinc levels in blood standard addition method is reliable for determination of lead and zinc in the blood with good accuracy and reproducibility.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권2호
• /
• pp.214-219
• /
• 2008

An experiment was conducted to evaluate the effects of nitrogen (N) level on the dry matter (DM) yield, N concentration and oxalate content of some tropical grasses, namely Rhodesgrass (Chloris gayana), Guineagrass (Panicum maximum) and Sudangrass (Sorghum vulgare). Three levels of N as urea were applied (Standard- 260, $Standard{\times}2$- 540 and$Standard{\times}4$- 1,060 kg N/ha for Rhodesgrass; Standard- 380, $Standard{\times}2$- 770 and $Standard{\times}4$- 1,570 kg N/ha for Guineagrass and Sudangrass) in a completely randomized design and grasses were harvested twice at approximately two-month intervals. Dry matter yield tended to be higher with increased rate of N fertilizer in all species, while further additional N ($Standard{\times}2$ or $Standard{\times}4$) did not significantly (p>0.05) further increase DM yield, when compared with the Standard level of N fertilizer application. There was also a trend towards higher N concentration in plants as N fertilization increased in all species and it was increased significantly in Rhodesgrass and Sudangrass (p<0.05 or p<0.01, respectively). Further additional N ($Standard{\times}2$ or $Standard{\times}4$) application showed no significant (p>0.05) differences on oxalate content in plant tissue within species, when compared with the Standard level of N. The Rhodesgrass contained 0.11, 0.13 and 0.15% soluble oxalate and 0.23, 0.25 and 0.27% total oxalate with Standard, $Standard{\times}2$ and $Standard{\times}4$ level of N application, respectively. The Guineagrass contained 0.54, 0.50 and 0.42% soluble oxalate and 1.60, 1.56 and 1.45% total oxalate with Standard, $Standard{\times}2$ and $Standard{\times}4$ level of N application, respectively. The Sudangrass contained 0.06, 0.15 and 0.12% soluble oxalate and 0.22, 0.22 and 0.21% total oxalate with Standard, $Standard{\times}2$ and $Standard{\times}4$ level of N application, respectively The results from this study suggest that these grasses do not use further addition of N fertilizer ($Standard{\times}2$ or $Standard{\times}4$) to form high content of oxalate salts, when compared with the Standard level of N. In addition, the levels of oxalate present with these grasses are quite low as far as toxicity to animals is concerned.

• Communications for Statistical Applications and Methods
• /
• 제20권2호
• /
• pp.137-145
• /
• 2013

The use of pooled standard deviation can reduce the efficiency loss in optimum allocation when strata standard deviations are estimated and several of them are equal. Also shown is that the pooled standard deviation is useful in optimum allocation under a multivariate setting. In addition to theoretical development, we provide the result of simulation study to support the theory.

• 대한지역사회영양학회지
• /
• 제1권1호
• /
• pp.28-40
• /
• 1996

This study was conducted to evaluate the nutrition quality of the commercial infant formulas and to seek the solution to the establishment of the standard of nutrient requirements for infant formula in Korea. Nutrition informations were obtained from the labels of nineteen commercial infant formulas manufactured by 3 different companies, and the actual amounts of some nutrients were analyzed and compared to the labeled amounts. In addition, the nutrient composition of the commercial infant formulas was compared to the composition of breast milk, RDA for infants, and Codex standard for infant formula. The kind of minerals, vitamins and special components added to the commercial infant formulas were the major differences among 3 manufacturers. For some nutrients, the analyzed amounts were lower than the labeled amounts. In addition when different batches of the same kind of infant formula were analyzed, the large variations in the amounts of certain nutrients were noted. These data suggest that the nutrition labeling informations need to be validated, and nutrients added to the formulas are to be homogenized thoroughly. In order to solve these problems, therefore, like other countries, we need to establish the standard of nutrient requirements for infant formulas. Considering the available data on breast milk composition, RDA for infants and coordination with the international standard, we suggest the adoption of the Codex standard for infant formula may be the best way to manage the nutrition quality of commercial infant formulas at the present time.

• 한국전자거래학회지
• /
• 제7권2호
• /
• pp.39-53
• /
• 2002

In the Korean domestic construction field, there are a lot of problems related to construction information exchange and sharing owing to the absence of construction drawing information exchange standard. To remedy the aforementioned inefficiency effectively, it is necessary to apply the STEP standard which is known as an international standard for achieving the establishment of Construction CALS. This study focus on suggesting a methodology to activate the STEP based construction drawing information exchange standard to the current construction drawing information exchanging and sharing practice. In this paper, the domestic and foreign standardization projects related to the construction drawing information have been investigated and analyzed. In addition, a methodology of applying and activating the STEP standard has been suggested. Finally, a verification and certification methodology for applying the CALS/EC construction drawing information exchange standard(STEP) have been suggested.