• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.2
• /
• pp.105-117
• /
• 2004

In each industry field, many engineers have tried to develop integrated environments using information technology. The core technology in building integrated environments is the database based on standardized information. To meet the requirements, this study builds a database with detailed design information as a part of integrating digital information generated from every work of steel bridges. The data model used to build the database was developed based on the international standard, namely ISO/STEP. The data model is classified into geometric and non-geometric parts to represent the design information of steel bridges. The geometric parts are represented by a three dimensional solid model so that they may be able to reuse existing information. Also, the non-geometric parts represent information requirements that are analyzed by the development method of standard data model. To verify the data model, this study validates the syntax of the model on EXPRESS Engine and verifies the validation of the model by applying the design data of Hannam bridge to the database.

• Journal of Plant Biotechnology
• /
• v.42 no.3
• /
• pp.257-264
• /
• 2015

To determine whether metabolite fingerprinting for whole cell extracts based on Fourier transform infrared (FT-IR) spectroscopy can be used to discriminate and compare metabolic equivalence, standard medicinal parts from four medicinal plants (Cynanchum wilfordii Hemsley, Atractylodes japonica Koidz, Polygonum multiflorum Thunberg and Astragalus membranaceus Bunge) and their in vitro-produced adventitious roots were analyzed by FT-IR spectroscopy. The principal component analysis (PCA) and partial least square discriminant analysis (PLS-DA) from the FT-IR spectral data showed that the whole metabolic pattern from Cynanchum wilfordii was highly similar to Astragalus membranaceus. However, Atractylodes japonica and Polygonum multiflorum showed significantly different metabolic patterns. Furthermore, adventitious roots from Cynanchum wilfordii and Astragalus membranaceus also showed similar metabolic patterns compared to their standard medicinal parts. These results clearly show that mass proliferation of adventitious roots may be applied to aquire novel supply of standard medicinal parts from medicinal plants. However, the whole metabolic pattern from adventitious roots of Atractylodes japonica and Polygonum multiflorum were not similar to their standard medicinal parts. Furthermore, FT-IR spectroscopy combined with multivariate analyses established in this study may be applied as an alternative tool to discriminate the whole metabolic equivalence from several standard medicinal parts. Thus, we suggest that these metabolic discrimination systems may be applied for metabolic standardization of herbal medicinal resources.

• Journal of Multimedia Information System
• /
• v.4 no.2
• /
• pp.73-78
• /
• 2017

The Future Video Coding (FVC) is a new state of the art video compression standard that is going to standardize, as the next generation of High Efficiency Video Coding (HEVC) standard. The FVC standard applies newly designed block structure, which is called quadtree plus binary tree (QTBT) to improve the coding efficiency. Also, intra and inter prediction parts were changed to improve the coding performance when comparing to the previous coding standard such as HEVC and H.264/AVC. Experimental results shows that we are able to achieve the average BD-rate reduction of 25.46%, 38.00% and 35.78% for Y, U and V, respectively. In terms of complexity, the FVC takes about 14 times longer than the consumed time of HEVC encoder.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.304-305
• /
• 2018

Development of waterproof methods and materials resulted in the huge changes in waterproof construction materials. In consequence, the construction-standard-production-rate underwent overall revision in 2018. Especially, from the development of the specification standard and construction methods, the waterproof construction which had lower applicability in the existing construction production rate was revised. The construction methods which did not have applicability were removed. In addition, as there was a material difference based on parts, the constructionstandard-production-rate was revised by distinguishing vertical part and floor. Furthermore, by suggesting more clear work extent, the practicability in creating the standard for calculation of the estimated price in the construction field will increase.

• Korean Journal of Veterinary Service
• /
• v.39 no.1
• /
• pp.7-12
• /
• 2016

The Autofom is a equipment for predicting the amount of pig carcasses meat using the 16 ultrasonic sensors to measure in real time and it was established in Dodram LPC in Gyeonggi Province of Korea for the first time. This study was carried out to validate the reliability of Autofom statistically and to establish guideline for developing a analytic formula through comparing the measurement between Autofom and dissection. The ham parts of sixty-six pig carcasses were measured with Autofom and by two experimental performers. The weight means and standard deviations of ham parts including bone by measurements with Autofom and dissection were $10.69{\pm}0.81kg$ and $10.77{\pm}0.94kg$, respectively a strong positive correlation (P<0.01) was identified, with a coefficient of determination ($R^2$) of 0.82. The weight means and standard deviations of lean ham parts by measurements with Autofom and dissection were $7.41{\pm}0.58kg$ and $7.42{\pm}0.89kg$, respectively a strong positive correlation (P<0.01) was identified, with a coefficient of determination ($R^2$) of 0.72. The root mean square errors of two groups were 0.40 and 0.50, respectively.

• Korean Journal of Agricultural Science
• /
• v.40 no.2
• /
• pp.163-167
• /
• 2013

Objective of the study was to compare reflectance spectrum in the blade and the vein parts of cabbage and kale leaves. A total 6 cabbage and kale leaves were taken from a plant factory in Chungnam National University, Korea. Spectra data were collected with a UV/VIS/NIR spectrometer (model: USB2000, Ocean Optics, FL, USA) in the wavelength region of 190 - 1130 nm. Median filter smoothing method was selected to preprocess the obtained spectra data. We computed reflectance difference by subtraction of averaged spectrum from individual spectrum. To estimate correlation at different parts of cabbage and kale leaves, cross - correlation method was used. Differences between cabbage and kale leaves are clearly manifested in the green, red and near - infrared ranges. The percent reflectance of cabbage leaves in the NIR wavelength band was higher than that of kale leaves. Reflectance in the blade part was higher than in the vein part by 18%. Reflectance difference in the different parts of cabbage and kale leaves were clear in all of the wavelength bands. Standard deviation of reflectance difference in the vein part was greater for kale, while the value in the blade part was greater for cabbage leaves. Standard deviation of cross - correlation increased from 0.092 in the first sensor (UV/VIS) and 0.007 in the second sensor (NIR) to 0.099 and 0.015, respectively.

• The Korean Journal of Air & Space Law and Policy
• /
• v.17
• /
• pp.133-152
• /
• 2003

Certification by Civil Aviation Law is necessary for aircraft parts and appliances as well as aircraft, engines, and propellers to ensure safety and reliability in operation. Advanced countries in aerospace industry as like U.S.A require Parts Manufacturer Approval for aircraft parts and Technical Standard Order Authorization for designated appliances. However, there are no legal requirements for certification of aircraft parts and appliances in Korea until now. This study presents the draft to revise Civil Aviation Law, which is applicable to set up domestic certification system and maintain it equivalent to U.S. Federal Aviation Regulation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.1 s.41
• /
• pp.33-52
• /
• 1992

In order to get the basic information about the designing and manufacturing of special clothing which is suitable diplegia individuals, taking anthropometic measurements, the di-plegia's body dimension, standard dimension, their correlation, maximum, minimum, the relative deviation graph of Mollison and the body index were obtained. The writer examined their body development and abnormal somatotype and compared the difference with the normal somatotype. The results are as follows: 1 One characteristic of the body of diplegia individuals is that their lower parts are dis- proportionately developed, compared to their upper parts. 2. Diplegia individuals have smaller measurements than those of the normal; height, breadth, and circumference measurments of lower parts. And diplegia individuals have larger measur- ments; breadth and circumference measurements of upper parts, most of the length measur- ements. 3. In body index, diplegia individuals have lager measurments than those of the normals; most of index for stature and chest circumference and waist circumference index. And diplegia individuals have smaller measurments; most of the lower parts. 4. Change of somatotype according to age is unbalanced different from the normal's. 5. For the proportion of diplegia individuals, therefore a different pattern design of ciothing is required based on their special somatotype.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.1
• /
• pp.65-73
• /
• 2008

As the system requirements of performance, weight, cost are increasing, the needs of electronic parts which have high performance and efficiency are growing. To satisfy such requirements, demand of high performance and rapid upgraded commercial parts is also increasing compared to NASA or ESA standard parts. Especially, commercial PEM(Plastic Encapsulated Microcircuit) parts are applied in many space programs and research is continuing to broaden its application area. In this paper, concerns and verification trends of commercial PEM parts in space applications are introduced.

• Steel and Composite Structures
• /
• v.26 no.3
• /
• pp.289-301
• /
• 2018

The rigid steel connections were suffered severe damage because of low rotational capacity during earthquakes. Hence, many investigations have been conducted on the connections of steel structures. As a solution, steel slit dampers were employed at the connections to prevent brittle failure of connections and damage of main structural members. Slit damper is a plate or a standard section with a number of slits in the web. The objective of this paper is to improve the seismic performance of steel slit dampers in the beam-to-column connection using finite element modeling. With reviewing the previous investigations, it is observed that slit dampers were commonly fractured in the end parts of the struts. This may be due to the low participation of struts middle parts in the energy dissipation. Thus, in the present study slit damper with elliptic slits is proposed in such a way that end parts of struts have more energy absorption area than struts middle parts. A parametric study is conducted to investigate the effects of geometric parameters of elliptic slit damper such as strut width, strut height and plate thickness on the seismic performance of the beam-to-column connection. The stress distribution is improved along the struts in the proposed slit damper with elliptic slits and the stress concentration is decreased in the end parts of struts. The average contributions of elliptic slit dampers, beam and other sections to the energy dissipation are about 97.19%, 2.12% and 0.69%, respectively.