• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.210-216
• /
• 2003

This study focuses on the physical environment and human activity of the user of train toilets, on the analysis of factors needed to obtain reasonable toilet design and it also focuses on the understanding of the interface between its user. Moreover it proposes a module of the development process and methods of approaching the User Toilet Interface. The study so presents a design standard under which the concrete data of the characteristics and practicable range and the convergent demands accelerate to the module could be confirmed and criticized.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.954-956
• /
• 1999

In the case of using sensor in the industrial control systems, the location of sensor is not close to the system which utilizes the sensor data. Two main functions of intelligent sensor are data processing and communication. In this paper, we will show that the developed result of intelligent sensor, which process the sensor data inside of the sensor module, except for the communication function. For this, we refered to the Profibus and Fieldbus Foundation standard.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.383-386
• /
• 1986

In this paper, ultrasonic range finding module for the self-contained robot, INHAE-1, is presented. This system is processed, using Z-80 microprocessor, a much of information on the surrounding condition in real time and is realted a sensor for many side data acqusition with a stepping motor. Also this system can obtain the more correct edge of the obstacle using the standard deviation of the least-square method. In this experiment, it gives more correct information to mobile robot of the blind guidance and improves the orientation of the robot path.

• Journal of the Korean Society of Safety
• /
• v.8 no.4
• /
• pp.61-64
• /
• 1993

Until now, Industrial robotic sa(ety problems are not considered as a indust rial safety problems. In order to reduce industrial robotic safety problem, analyzing problem, risk control, and developing industrial robotic standard s are necessary. In this study, SAFEMIR(Safety Management for Industrial Robotic) is developed for preventing mul-function in industrial robotics. This system is consisted of Da ta Base Management System Module and Expert System Module which Is a part of Articial In telligence. Borland C++ and Foxpro 2.0 are used for implementing this system.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.27 no.3
• /
• pp.71-78
• /
• 2021

Purpose: It is important to plan the ward module at a time when the size of beds, the floor area, and the construction budget are all set prior to the hospital design. In this context this study aims (1) to derive various factors affecting the ward module, and (2) to analyze the appropriate room module according to the type. Methods: Design factors related to hospital modules are derived through precedential studies, and the types of ward elevation are classified by reviewing the drawings of 18 case hospitals. And the detailed dimensions and area of the derived elements are analyzed. Results: The X-axis modules of the ward are switched to long span structural columns of 9.9 m, 12.6 m and 13.2 m, but the ward modules still represent 6.6 m. The Y-axis module of the ward shows a dimension of 9 to 9.9m in the process of changing a multi-person room into a four-person room. Type A of curtain wall with columns located on the wall of the room and type B of curtain wall located in the center of the room are analyzed due to their variations. The square window type, which forms the elevation of the square window by exposing the columns to the elevation, and the outframe type, which protrudes from the structural columns and beams, have elevation designs limited. There are, however, no obstacles to the interior space of the hospital room, so the wall composition and furniture arrangement are expected to be free. The ward area of Curtain Wall Type A, which can secure an effective area of 5.9m*5.0m, are 52.1m². The Curtain Wall Type A, Square window type, and the outframe type are 49.8m². Implications: As part of the hospital standard module plan for economical and reasonable hospital building planning, a type was proposed in this study in conjunction with the external design. It is hoped that it be a base for standard module research linked together to the Central Treatment department, Outpatient department and underground parking lot.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.3
• /
• pp.601-614
• /
• 2007

Lately, as importance of biometric is recognized, domestic and foreign biometric software market is soaring and the requests of high reliability and quality of biometric software are inclosed. Evaluation items and criteria must be established for the biometric software quality certification. In this paper, we development the evaluation module for biometric software test based on ISO/IEC 12119 that is the standard about package software quality requirement and test, and ISO/IEC 9126 that is the standard about evaluation of software product, and ISO/IEC 14598-6 that is the standard for construction of the evaluation module. We think that this study can be used in establishing the software quality evaluation method of bio information processing software and constructing the basis for quality improvement.

• Membrane Journal
• /
• v.8 no.4
• /
• pp.220-227
• /
• 1998

Recent data from Environmental department show that some out of 2,000 places surveyed are contaminated by nitrate, ammonia, fluoride, chloride and so forth in excess of the environmental standard-including purification plants, water taps, small water supply systems. In this study, some items which exceed drinking water standard were chosen and their concentrations were made varying from around standard level to around detected maximum concentration. After they permeated through the membrane module sold in the domestic market and made for household water-purifier, the most suitable membranes were selected according to individual water quality of various regions. In addition, the bacterial growth after storage for various days and under various temperatures was examined for the purpose of the effect of the time and temperature on bacterial growth.

• Journal of the Korean housing association
• /
• v.23 no.4
• /
• pp.41-48
• /
• 2012

The purpose of the study, approaching from the aspect of the construction technologies, is to determine the architectural techniques of traditional wood architects in existence, through which the systems and techniques that create the inherent characteristics of Korean Architecture are clarified. With understanding traditional construction system and focusing on the fact that built environment results from the consistent standards and technologies of architects, this study inquires into the systematic standard and its formation that present in the process of planning for the overall scale and shape of a building from the following (four) perspectives. The study determines the characteristics of '間(Kan)' (unit; fundamental unit that measures Korean traditional houses) and the methods of columns disposition of which the '間 (Kan)' is made up. Once the necessary spaces are decided according to the size of a building, then floor plans are drawn with the standard unit, '間(Kan)'. The '間(Kan)', as a modular unit, is not only composing the floor plans, but also functioning as an Area unit, Space unit and Structural unit. Composition of '間(Kan)' varies with disposition of columns, and therefore multiform of floor and spaces are created. In this study, the '間(Kan)', as a standard unit, is used in the form of specific size and area, and it is demonstrated how the floor plans are developed by organizing the columns in accordance with the spaces requested.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.318-318
• /
• 2009

The door stiffness is one of the important factors side impact. Generally, the researches have been conducted on the assembled door module. This study is to analysis the side impact characteristics for automotives door module. The impact characteristics have been determined by door module side impact test machine. To determine the initial, intermediate and peak crush resistances use the plot of load versus displacement and obtain the integral of the applied load with respect to the crush distances specified below for each door tested. The initial crush resistance is the average force required to deform the door through the initial 6 inches of crush. The intermediate crush resistance is the average force required to deform the door through the initial 12 inches of crush. The peak crush resistance will be directly obtained from the plot of load versus displacement since it is the largest force required to deform the door through the entire 18 inches crush distance. The data are used to determine if a specific vehicle or item of automotives equipment meets the minimum performance requirements of the subject Federal Motor Vehicle Safety Standard(FMVSS). FMVSS Static 214, Side impact protection, specifies performance requirements for protection of occupants in side impact crashes.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.1
• /
• pp.1196-1204
• /
• 2001

In this paper, a new architecture of operating software associated with the component-based method is proposed. The proposed architecture comprises 문 execution module and a decision-making module. In order to make effective development and maintenance, the execution module is divided into three components. The components are referred to as Symbol, Gateway, and Control, respectively: The symbol component is for the GUI environments and the standard interfaces; the gateway component is for the network communication and the structure of asynchronous processes; the control component is for the asynchronous processing and machine setting or operations. In order to verify the proposed architecture, and off-line version of operating software is made, and its steps are as follows; I) Make virtual execution modules for the manufacturing devices such as dual-arm robot, handling robot, CNC, and sensor; ii) Make decision-making module; iii) Integrate the modules and GUI using a well-known development tools such as Microsofts Visual Basic; iv) Execute the overall operating software to validate the proposed architecture. The proposed software architecture in this paper has the advantages such as independent development of each module, easy development of network communication, and distributed processing of resources, and so on.