• 제목/요약/키워드: Standard Housing Model

검색결과 92건 처리시간 0.024초

노후 공동주택 구조 및 설비성능개선 기술 개발;2차년도 실적 및 차년도 연구계획 소개 (Developing Aged-Housing Remodeling Technology for Improving Structural and Equipment performance;Introduction of Center for Aged-housing Remodeling Technology)

  • 한주연;김경래
    • 한국건설관리학회:학술대회논문집
    • /
    • 한국건설관리학회 2007년도 정기학술발표대회 논문집
    • /
    • pp.190-196
    • /
    • 2007
  • 노후 공동주택의 수가 급격하게 증가하면서 주거 환경적인 문제, 구조성능의 저하, 설비의 노후화에 따른 성능저하등으로 인하여 노후 공동주택에 다양한 형태의 결함 및 문제점이 발생되고 있으며, 향후 이 같은 문제는 더욱 범위가 넓고 다양하게 발생될 것이다. 이러한 노후 공동주택을 개선하기 위한 방법으로 현재 사업추진의 용이성 때문에 재건축이 가장 많이 활용되고 있으나 천연골재의 부족, 폐기물 발생으로 인한 자연환경 파괴, 국가적 자원의 낭비, 재건축이 가장 많이 활용되고 있으나 천연골재의 부족, 폐기물 발생으로 인한 자연환경 파괴, 국가적 자원의 낭비, 재건축단지 인근 지역의 전세대란 초래 등으로 인하여 향후 급격하게 증가하는 노후 공동주택을 대상으로 산업적, 정책적인 측면에서 더 이상 재건축을 적극적으로 추진하기 어려운 실정이다. 따라서 노후 공동주택 성능 개선을 위한 방안으로 무분별한 재건축 추진을 억제하고 리모델링을 활성화 하는 것이 필요하다. 이를 위해 본 연구에서는 수요자의 요구사항을 바탕으로 한 요구 성능을 파악하고, 이를 근간으로 요소기술을 도출하였으며, 도출된 요소기술을 설계, 구조, 설비, 시공의 각 분야별로 묶어 연구를 진행함으로써 리모델링 활성화에 기여하고자 한다.

  • PDF

주거지역 종세분화에 따른 주거환경 개선에 관한 연구 - 바람길을 중심으로 - (A study of Improvement for Residential Environment according to Segementation of Residential Zoning)

  • 김대욱;정응호;류지원;차재규;이준영
    • 한국주거학회논문집
    • /
    • 제21권2호
    • /
    • pp.101-109
    • /
    • 2010
  • Various environmental problems due to rapid industrialization and urbanization have worsened to such an extent that they threaten the environmental restitution of the globe and become a critical international issue. Korean government has presented the concept of green growth as a new state vision for the next 60 years and is making efforts to solve these environmental problems. Daegu Metropolitan City has faced various environmental problems including overpopulation of the city, traffic pollution, household waste accumulation and the green zone problem because of the increase of urbanization over the last few decades. As such urbanization continues, the quality of residential environments is rapidly deteriorating and the intensive use of the land leads to an increase of building area, raising the temperatures of cities. There have therefore been demands for healthy, pleasant and satisfying residential environments and for the improvement of existing residential environments, and this demand has been fully recognized by society. Nevertheless, current residential complex developments concentrate only on raising the efficiency of land use. In related laws of the past (Daegu Metropolitan City, Urban Planning Municipal Ordinance as of October 10, 2003) an attempt was made to impose a standard to segmentalize the building-to-land ratio, floor area ratio and regulations of number of floors vertically. However, these laws have now been abolished and the regulations are being eased. The purpose of this study was to analyze the characteristics of the floating wind before and after the vertical segmentation of residential areas (Daegu Metropolitan City, Urban Planning Municipal Ordinance as of October 10, 2003) by using KLAM_21, a model that enables analysis and prediction of the flow and generation of cold wind. The purpose is also to present a plan to improve the quality of residential areas when developing a building lot and redeveloping housing areas.

기어의 이상검지 및 진단에 관한 연구 -Wavelet Transform해석과 KDI의 비교- (A Study on Fault Detection and Diagnosis of Gear Damages - A Comparison between Wavelet Transform Analysis and Kullback Discrimination Information -)

  • 김태구;김광일
    • 한국안전학회지
    • /
    • 제15권2호
    • /
    • pp.1-7
    • /
    • 2000
  • This paper presents the approach involving fault detection and diagnosis of gears using pattern recognition and Wavelet transform. It describes result of the comparison between KDI (Kullback Discrimination Information) with the nearest neighbor classification rule as one of pattern recognition methods and Wavelet transform to know a way to detect and diagnosis of gear damages experimentally. To model the damages 1) Normal (no defect), 2) one tooth is worn out, 3) All teeth faces are worn out 4) One tooth is broken. The vibration sensor was attached on the bearing housing. This produced the total time history data that is 20 pieces of each condition. We chose the standard data and measure distance between standard and tested data. In Wavelet transform analysis method, the time series data of magnitude in specified frequency (rotary and mesh frequency) were earned. As a result, the monitoring system using Wavelet transform method and KDI with nearest neighbor classification rule successfully detected and classified the damages from the experimental data.

  • PDF

Genetic Parameters and Responses in Growth and Body Composition Traits of Pigs Measured under Group Housing and Ad libitum Feeding from Lines Selected for Growth Rate on a Fixed Ration

  • Nguyen, Nguyen Hong;McPhee, C.P.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제18권8호
    • /
    • pp.1075-1079
    • /
    • 2005
  • The main objective of this study is to examine genetic changes in growth rate and carcass composition traits in group housed, ad libitum fed pigs, from lines of Large White divergently selected over four years for high and low post-weaning daily gain on a fixed but restricted ration. Genetic parameters for production and carcass traits were also estimated by using average information-restricted maximum likelihood applied to a multivariate individual animal model. All analyses were carried out on 1,728 records of group housed ad libitum fed pigs, and include a full pedigree of 5,324 animals. Estimates of heritability (standard errors in parentheses) were 0.11 (0.04) for lifetime daily liveweight gain (LDG), 0.13 (0.04) for daily carcass weight gain (CDG) and 0.28 (0.06) for carcass backfat (CFT). Genetic correlations between LDG and CDG were highly positive and between LDG and CFT negative, suggesting that selection for lifetime daily gain under commercial conditions of group housing with ad libitum feeding would result in favourable improvement in carcass traits. CFT showed negative genetic correlations with CDG. Correlated genetic responses evaluated as estimated breeding values (EBVs) were obtained from a multivariate animal model-best linear unbiased prediction analysis. After four years of divergent selection for 6 week post-weaning growth rate on restricted feeding, pigs performance tested on ad libitum feeding in groups exhibited changes in EBVs of 6.77 and -9.93 (g/d) for LDG, 4.25 and -7.08 (g/d) for CDG, and -1.42 and 1.55 (mm) for CFT, in the high and low lines, respectively. It is concluded that selection for growth rate on restricted feeding would significantly improve genetic performance and carcass composition of their descendants when group housed and ad libitum fed as is a common commercial practice.

거주자참여방식을 적용한 공동주택의 실내공간계획에 관한 연구 (A Study on the Interior Space of Apartment Housing applying Resident's Participation Designing Method)

  • 박선희;문경하
    • 한국실내디자인학회논문집
    • /
    • 제25호
    • /
    • pp.68-76
    • /
    • 2000
  • The application of Residents Participation Designing Method is to provide the resident with a chance of either participating in the planning process of the house or selecting other possible options. The multi-household apartments have so far been grown in quantity by means of mass production and hence have contributed in elevating its supply. However, this manner of supplying has a tendency of ignoring much of the individuals concern regarding space planning And has therefore repeatedly standardized and stereotyped ground planning which only concerns its economic profit and effectiveness. As the standard of living and personal wealth have improved over the years, residents have come to demand a more futuristic model designed to satisfy the individuals personal taste and lifestyle. Therefore, the purpose of this study is to suggest the planning method of multi-household apartments to correspond to resident's specific demand.

  • PDF

The Evaluation of Energy Efficiency of Apartment Units after Conversion of Balconies into an Integrated Part of Interior Living Space by Computing with ECO2 Software

  • Kim, Chang-Sung
    • KIEAE Journal
    • /
    • 제16권2호
    • /
    • pp.11-16
    • /
    • 2016
  • Purpose: International efforts to save Earth's environment against global warming and environmental pollution have been made in many countries. Energy consumption of buildings has been continuously increasing, and it has been over 40% of total energy consumption in the world. Energy consumption of buildings in Korea reaches 24% of total energy consumption. So, Korea government has executed building energy rating systems to control energy consumption of buildings. Method: This study was carried out to evaluate the energy performance of apartment unit plans according to converting balconies into living areas. For the study, six types of input models were made. Two input models(SP1 and SP 2) were the standard units that balcony areas were not converted into living areas, and four ones(EP 1, EP 2, EP 3 and EP 4) were the extended unit plans that balcony areas were turned into living areas. All of them were simulated with ECO2 software to assess building energy efficiency. Result: According to the results, the energy performance of the EP 2 and EP 4 models were 21. 8% higher than SP 1 model and 9.2% higher than SP 2 model.

목조주택 모형개발을 위한 평면모듈 설정에 대한 연구 - 기둥-보 방식 구조를 중심으로 - (A study on the Plan Modular Establishment for the Development of Wooden Dwelling Model - Focused on the Post & Beam Structure -)

  • 강만호;주석중;김재덕
    • 한국주거학회논문집
    • /
    • 제18권1호
    • /
    • pp.141-148
    • /
    • 2007
  • In this research, to develope wooden house model with post & beam structure which is commensurate with domestic environment, we analyzed the size and module of a unit space and space organization of existing habitation, then, based on the result, we tried to suggest general wood house modules. For this, we investigated 98 floor plans for 30 pyeong apartment in Seoul, Gyounggi-do, Gwangju, and Jeolla-do. The results are showed as follows. 1) It has shown that 7 posts distances are available in 2 bay floor plan type - 3.0 m, 3.3 m, 3.6 m, 3.9 m, 4.2 m, 4.5 m, and 4.8 m. 2) It has shown that 8 posts distances are available in 3 bay floor plan type - 3.0 m, 3.3 m, 3.6 m, 3.9 m, 4.2 m, 4.5 m, 4.8 m, and 5.1 m. It was concluded as follows, applying the standard of regulations of horizontal modular coordination design, from $\ulcorner$the standard of modular coordination design in architecture(KSF 1525)$\lrcorner$. 1) The available widths are 3.0 m, 3.3 m, 3.6 m, 4.2 m, and 4.8 m, and the available depths are 3.0 m, 3.3 m, 3.6 m, and 4.2 m. 2) To guarantee a space through post module of a room combination, we can use a module of 3.6 m, 4.2 m, 4.8 m except 3.0 m, 3.3 m among available modules. The module investigated in post & beam structure wooden house is applied in basic 6 floor plans as follows. 1) When organize the room on the basis of tile module of 3.6 m, 4.2 m, it was possible to organize the floor plan. 2) After arranging main room, making practical application of variableness which is advantage of post & beam structure, putting to practical use of extra space that becomes the combination of atypical room such as kitchen, dining room, and bathroom, it was possible to organize the floor plan of the residence. 3) It is possible to organize whole rooms through the plan module from 3.6 m to 4.2 m, that decides the floor plan of a wooden house.

Reliability evaluation of steel truss bridge due to traffic load based on bridge weigh-in-motion measurement

  • Widi Nugraha;Indra Djati Sidi;Made Suarjana;Ediansjah Zulkifli
    • Structural Monitoring and Maintenance
    • /
    • 제9권4호
    • /
    • pp.323-336
    • /
    • 2022
  • Steel truss bridge is one of the most widely used bridge types in Indonesia. Out of all Indonesia's national roads, the number of steel truss bridges reaches 12% of the total 17,160 bridges. The application of steel truss bridges is relatively high considering this type of bridge provides advantages in the standardization of design and fabrication of structural elements for typical bridge spans, as well as ease of mobilization. Directorate of Road and Bridge Engineering, Ministry of Works and Housing, has issued a standard design for steel truss bridges commonly used in Indonesia, which is designed against the design load in SNI 1725-2016 Bridge Loading Standards. Along with the development of actual traffic load measurement technology using Bridge Weigh-in-Motion (B-WIM), traffic loading data can be utilized to evaluate the reliability of standard bridges, such as standard steel truss bridges which are commonly used in Indonesia. The result of the B-WIM measurement on the Central Java Pantura National Road, Batang - Kendal undertaken in 2018, which supports the heaviest load and traffic conditions on the national road, is used in this study. In this study, simulation of a sequences of traffic was carried out based on B-WIM data as a moving load on the Australian type Steel Truss Bridge (i.e., Rangka Baja Australia -RBA) structure model with 60 m class A span. The reliability evaluation was then carried out by calculating the reliability index or the probability of structural failure. Based on the analysis conducted in this study, it was found that the reliability index of the 60 m class Aspan for RBA bridge is 3.04 or the probability of structural failure is 1.18 × 10-3, which describes the level of reliability of the RBA bridge structure due to the loads from B-WIM measurement in Indonesia. For this RBA Bridge 60 m span class A, it was found that the calibrated nominal live load that met the target reliability is increased by 13% than stated in the code, so the uniform distributed load will be 7.60 kN/m2 and the axle line equivalent load will be 55.15 kN/m.

Tissue integration of zirconia and titanium implants with and without buccal dehiscence defects

  • Lim, Hyun-Chang;Jung, Ronald Ernst;Hammerle, Christoph Hans Franz;Kim, Myong Ji;Paeng, Kyeong-Won;Jung, Ui-Won;Thoma, Daniel Stefan
    • Journal of Periodontal and Implant Science
    • /
    • 제48권3호
    • /
    • pp.182-192
    • /
    • 2018
  • Purpose: The purpose of the present study was to validate an experimental model for assessing tissue integration of titanium and zirconia implants with and without buccal dehiscence defects. Methods: In 3 dogs, 5 implants were randomly placed on both sides of the mandibles: 1) Z1: a zirconia implant (modified surface) within the bony housing, 2) Z2: a zirconia implant (standard surface) within the bony housing, 3) T: a titanium implant within the bony housing, 4) Z1_D: a Z1 implant placed with a buccal bone dehiscence defect (3 mm), and 5) T_D: a titanium implant placed with a buccal bone dehiscence defect (3 mm). The healing times were 2 weeks (one side of the mandible) and 6 weeks (the opposite side). Results: The dimensions of the peri-implant soft tissue varied depending on the implant and the healing time. The level of the mucosal margin was located more apically at 6 weeks than at 2 weeks in all groups, except group T. The presence of a buccal dehiscence defect did not result in a decrease in the overall soft tissue dimensions between 2 and 6 weeks ($4.80{\pm}1.31$ and 4.3 mm in group Z1_D, and $4.47{\pm}1.06$ and $4.5{\pm}1.37mm$ in group T_D, respectively). The bone-to-implant contact (BIC) values were highest in group Z1 at both time points ($34.15%{\pm}21.23%$ at 2 weeks, $84.08%{\pm}1.33%$ at 6 weeks). The buccal dehiscence defects in groups Z1_D and T_D showed no further bone loss at 6 weeks compared to 2 weeks. Conclusions: The modified surface of Z1 demonstrated higher BIC values than the surface of Z2. There were minimal differences in the mucosal margin between 2 and 6 weeks in the presence of a dehiscence defect. The present model can serve as a useful tool for studying peri-implant dehiscence defects at the hard and soft tissue levels.

가공변수의 불확실성을 고려한 전자제어식 차동제한장치 솔레노이드 어셈블리의 강건 최적설계 (Robust Optimization of the Solenoid Assembly in Electromagnetic Limited Slip Differential by Considering the Uncertainties in Machining Variables)

  • 오상균;이광기;서창희;정윤철;김영석
    • 대한기계학회논문집A
    • /
    • 제35권10호
    • /
    • pp.1307-1313
    • /
    • 2011
  • 전자제어식 차동제한 장치는 기계식에 비해서 능동제어가 가능하고 응답성이 좋아 기계식을 대체해 나가고 있다. STS 304 재질의 코일 하우징은 전자제어식 차동제한장치의 솔레노이드 어셈블리에서 가장 중요한 부품이다. 코일 하우징의 제조시 높은 형상 정밀도가 필수적이나, STS 304의 박판 사용과 가공변수의 변동으로 정밀 가공이 어렵다. 본 연구의 목적은 코일하우징의 가공조건에서 강건해를 구하여 평균과 변동을 최적화 하는 것이다. 코일하우징의 형상정밀도 평균과 표준편차를 최소화 하기 위한 주요 변수로 조의 척킹압력, 절삭속도, 이송속도의 평균과 표준편차가 고려됐다. 가공변수의 변동을 고려하여 평균과 표준편차를 모두 최소화 하는 최적의 조건을 선정하고자 반응표면모델 기반 2차 테일러 전개를 통한 강건 최적설계를 수행하였다.