• Journal of Photoscience
• /
• 제12권3호
• /
• pp.149-153
• /
• 2005

A chemiluminescence (CL) method for the determination of ascorbic acid was proposed, which is based on the enhancement of the CL intensity of $Ru(bipy)_3^{2+}$ - Ce (IV) system with the addition of ascorbic acid. The CL intensity is proportional to the concentration of ascorbic acid in the range of $1{\times}10^{-10}\;to\;1{\times}10^{-5}M$ with a correlation coefficient of 0.9985. The detection limit is $3{\times}10^{-11}M$. The relative standard deviation (R.S.D.) of 10 determinations of 0.1 mM ascorbic acid was 1.75%. The proposed method has been successfully applied to the determination of ascorbic acid in the commercia] drinks. The possible mechanism of the CL reaction was studied.

• Journal of Broadcast Engineering
• /
• 제22권1호
• /
• pp.42-50
• /
• 2017

A Bit-depth expansion is a method to increase the number of bit. It is getting important as the needs of HDR (High Dynamic Range) display or resolution of display have been increased because the level of luminance or expressiveness of color is proportional to the number of bit in the display. In this paper, we present effective bit-depth expansion algorithm for conventional standard 8 bit-depth content to display in high bit-depth device (10 bits). Proposed method shows better result comparing with recently developed methods in quantitative (PSNR) with low complexity. The proposed method shows 1db higher in PSNR measurement with 40 times faster in computational time.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2227-2229
• /
• 1999

As a direct-view flat panel displays, there are many devices, such as plasma display panels(PDPs), vacuum fluorescent displays (VFDs), and light emitting diode(LED). Among these, a PDP is the first type of panel display to be made commercially available. A 'Plasma display' is the general term for a flat display utilizing the light emission that is produced by gas discharge. However, the brightness and Luminous efficiency are still not adequate for consumer television. So, the new sustain electrode type of ac PDP was proposed. By arranging the transparent electrode of quadrangle by zigzag, the area of electrode are reduced, and the length of electrode gap is increased. It generates a high luminous efficiency(corresponding to a 40% improvement of standard type), the same discharge voltage characteristics, and the low power consumption at same luminance.

• Journal of Korean Society of Rural Planning
• /
• 제19권3호
• /
• pp.13-24
• /
• 2013

With the increase of visitors to rural tourism villages, the direct selling at sites is getting vitalized. Accordingly, their display stores is getting more important. Therefore, this study has selected 30 domestic rural tourism villages as study objects for the attitude survey of 200 farming suppliers and the site examination for the designs of those display stores in order to analyze their status and classify the types of necessity. Such operation status as sale item, sale method, method of supply and demand, major customer, sales scale, manager, opening hour, and operation cost were examined, to identity and for design factors the pattern, material quality and color were investigated. For the attitude of farming suppliers, the tactics of sales, the reason for being positive or negative, the functionality and the features of display stores were examined through brainstorming. IBM SPSS Statistics 20 Program was employed for Frequency, which indicated that village chiefs and store managers with the sales scale of 1 to 20 million won are dealing with female customers in their 40's and 50's and that those stores are open at the time of experience or year round without any operation expense. Permanent type and Fixed type were found to be the design factors of the display-case type with the material and the color of wood and orange respectively. The result of investigation analysis of farming suppliers' attitude showed the followings: the need of display stores is quite high, structure type and permanent type have high fitness and from the viewpoint of display-on-table type as a standard moving type was very convenient. The analysis of significant items at the characteristics of those display stores revealed that their locations, quality conservation, sanitation, users' convenience, designs and promotion are very important. The result of status analysis revealed that though there is a correlation among the types of display stores depending on the visiting season of tourists their installing is not desirable. Three types have been analyzed: Type 1 is a structure type only in the villages with continuous visitors, Type 2 a moving-table type only in the villages with temporary visitors and Type 3 is a fixed display-case type.

• Journal of Korea Multimedia Society
• /
• 제13권5호
• /
• pp.674-683
• /
• 2010

For the purpose of color reproduction under standard viewing conditions, recently, color display devices have developed for the colorimetric color reproduction. However the real viewing condition of color display devices is quite different from that. Therefore, it is very important for reproduced colors viewed under real conditions to match the color appearance under standard situations. There are various models that can be used to reproduce corresponding colors considering the chromatic adaptation of the human visual system. However neutral point or chromatic adaptation for the luminance level is not enough. In this paper, we propose a model that find adapting white points for the variations of the luminance levels under the same illuminant. This model is modeled by the proportion of Euclidian distance for luminance level. It is the adapting white function of the sigmoid type for surround luminance level. In the model, the optimal coefficients are obtained from the Hunt's experimental result. It is applied in the chromatic adaptation model using the neutral point of the various viewing conditions. And the neutral point can be used as the theoretical standard which determines the reference white of the color display devices.

• Analytical Science and Technology
• /
• 제12권5호
• /
• pp.415-420
• /
• 1999

We estimated the quantity of the scum remaining on the Black Matrix (BM) surface of color filter. To do this, histogram was analyzed which was obtained from AFM image of the BM surface. We divided the histogram to two Gaussian functions of the free BM surface (1) and the scum (2), and calculated the areas ($a_1$, $a_2$) of both the Gaussian functions. We quantified the residue as the ratio of the area ($a_2/(a_1+a_2)$). As a result of the Gaussian functions of the free BM surface, it was revealed that another kind of residue remained on the BM surface. It was difficult to quantify it. but it could relatively be estimated from the average height and the standard deviation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.981-983
• /
• 2003

Using the conventional standard CMOS logic process, the high voltage MOSFET to drive top emission OLEDs was fabricated for the silicon-based organic electroluminescent display. The drift region of the conventional high voltage MOSFET was implemented by the n-well of the logic process. The measurement result shows a good saturation characteristic up to 50 V without breakdown phenomena.

• Journal of the Semiconductor & Display Technology
• /
• 제14권3호
• /
• pp.73-77
• /
• 2015

This paper proposes an object tracking system according to reliability assessment of learning in mobile environments. The proposed system is based on markerless tracking, and there are four modules which are recognition, tracking, detecting and learning module. Recognition module detects and identifies an object to be matched on current frame correspond to the database using LSH through SURF, and then this module generates a standard object information that has the best reliability of learning. The standard object information is used for evaluating and learning the object that is successful tracking in tracking module. Detecting module finds out the object based on having the best possible knowledge available among the learned objects information, when the system fails to track. The experimental results show that the proposed system is able to recognize and track the reliable objects with reliability assessment of learning for the use of mobile platform.

• Journal of the Semiconductor & Display Technology
• /
• 제15권1호
• /
• pp.6-11
• /
• 2016

For high volume manufacturing using extreme ultraviolet (EUV) lithography, mask protection from contamination during lithography process must be solved, and EUV pellicle is the strongest solution. Based on the technical requirements of EUV pellicle, EUV pellicle should have large membrane area ($110{\times}140mm^2$) with film transmittance over 90% and mechanical stability. Even though pellicle that satisfies size standard with high transmittance has been reported, its mechanical stability has not been confirmed, nor is there a standard to evaluate the mechanical stability. In this study, we suggest a rather simple method evaluating mechanical stability of pellicle membrane using spin-coater which can emulate the linear accelerated motion. The test conditions were designed by simulating the acceleration distribution inside pellicle membrane through correlating the linear acceleration and centripetal acceleration, which occurs during linear movement and rotation movement, respectively. By these simulation results, we confirmed the possibility of using spin-coater to evaluate the mechanical stability of EUV pellicle.

• Journal of the Semiconductor & Display Technology
• /
• 제16권3호
• /
• pp.71-77
• /
• 2017

As the automobile industry has shifted to software, the Automotive SPICE standard has been established to ensure efficient product development process and quality. In the assessment model, the HIS Scope is the minimum standard for small and medium automotive electric companies to meet OEM requirements. However, in order to achieve the HIS Scope, the output of each process stage that meets the verification criteria of Automotive SPICE must be created. In particular, the test phase takes a lot of resources, which is a big burden for small and medium-sized companies. In this paper, we propose a methodology for creating test cases of software integration test phase based on UML sequence diagram, which is a software design phase of Automotive SPICE HIS Scope, by applying behavior model based testing method. We also propose a tool chain for automating the creation process. This will reduce the resources required to create a test case.