• 정보처리학회논문지A
• /
• 제14A권5호
• /
• pp.309-316
• /
• 2007

본 고에서는 최근 기술 개발되고 있는 위피 기반 LBS 단말 표준 플랫폼에 대하여 소개하고 있다. 위피 기반 LBS 단말 플랫폼은 이동 통신 단말기에 탑재되어 응용 프로그램을 수행할 수 있는 환경을 제공하는 모바일 표준 플랫폼 규격에서 위치정보를 획득하기 위한 API 이다. 이러한 위피 기반 LBS 단말 표준 플랫폼은 위치정보를 획득하고 처리할 수 있도록 단말 HAL API, 위피 C API, Java API 의 세가지 규격으로 구성되어 있다. 이중 HAL 부문과 C 부문은 Generic I/O 기반으로 개발 정의하였고, 이에 대하여서는 본 고에서 상세히 설명한다. 이러한 표준 플랫폼을 통해 위치정보기반 컨텐츠의 활용, 모바일 단말기 개발자에게 위치정보의 활용할 수 있는 표준화된 방법을 제공할 수 있다.

• Journal of information and communication convergence engineering
• /
• 제9권6호
• /
• pp.758-762
• /
• 2011

In this paper an efficient algorithm is proposed to remove additive white Gaussian noise(AWGN) with edge preservation. A function is used to separate the filtering mask to two sets according to the direction information. Then, we calculate the mean and standard deviation of the pixels in each set. In order to preserve the details, we also compare standard deviations between the two sets to find out smaller one. Corrupted pixel is replaced by the mean of the filtering window's median value and the smaller set's mean value that the rate of change is faster than the other one. Experiment results show that the proposed algorithm outperforms with significant improvement in image quality than the conventional algorithms. The proposed method removes the Gaussian noise very effectively.

• 한국CDE학회논문집
• /
• 제18권2호
• /
• pp.93-103
• /
• 2013

In the situation where there should be a gap between the design environments of 2D drawing and 3D BIM modeling, it is unavoidable aspect to face confusion caused by parallel usage of both technologies unless the project delivery systems are entirely upgraded to 3D. Therefore, it is critical to make efforts to minimize this confusion. Meanwhile, detailed drawings have very important roles in the construction process because they do not only concretely express construction methods for a given design plan but also provide basis for quantity takeoff and construction cost estimation etc. This paper suggests a plan to standardize detailed information based on BIM standard framework in order to make BIM realize the information. In the short term, this plan provides improved environment where both BIM and CAD technologies can be applied and, in the long term, it provides bases for BIM to replace CAD technology.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권3호
• /
• pp.69-78
• /
• 2001

This paper presents a process and operation planning system and an NC code post-processor for effective machining of press dies for production of cars. Based on the machining feature, major parts of press dies are categorized into 15 groups and a standard process plan is defined for each group. The standard process plan consists of a series of processes where a process is defined as a group of operations that can be done with one setup. Details such as cutting tools, cutting conditions, and tool paths are decided at the operation planning stage. At the final stage of process and operation planning, the NC code post-processor adjusts feedrates along the tool path to reduce machining time while maintaining the quality. The adjustment rule is selected based on the machining load estimated by virtual machining.

• 융합신호처리학회논문지
• /
• 제13권2호
• /
• pp.63-69
• /
• 2012

Noise is regarded as an unwanted component of the image because it significantly reduces image quality. And image is often corrupted by mixed noise. In this paper an efficient modified weighted filter algorithm which combines spatial weight and intensity weight is proposed for removing mixed noise. In the proposed method, the filtering mask is separated into the four sub-windows and the parameters of the weights are confirmed by calculating local standard deviation and the mean of four sub-windows' standard deviations. Considering the spatial information and intensity information, the proposed method has good performance on not only noise elimination but also preservation of details. Simulation results demonstrate that the proposed method performs better than conventional algorithms.

• The Plant Pathology Journal
• /
• 제38권3호
• /
• pp.175-181
• /
• 2022

Statistical analysis of data is an integral part of research projects in all scientific disciplines including the plant pathology. Appropriate design, application and interpretation of statistical analysis are also, therefore, at the center of publishing and properly evaluating studies in plant pathology. A survey of research works published in the Plant Pathology Journal, however, cast doubt on high standard of statistical analysis required for scientific rigor and reproducibility in the journal. Here I first describe, based on the survey of published works, what mistakes are commonly made and what components are often lacking during statistical analysis and interpretation of its results. Next, I provide possible remedies and suggestions to help guide researchers in preparing manuscript and reviewers in evaluating manuscripts submitted to the Plant Pathology Journal. This is not aiming at delineating technical and practical details of particular statistical methods or approaches.

• 한국건축시공학회지
• /
• 제3권2호
• /
• pp.103-110
• /
• 2003

In the early 1990's the clean room system was a new trend of the operating room. This is the concept using in seminconductor plants. That is what the space around the operating table so clean as it remove contaminations with circulation of interior air. These articles describe the standard of interior construction and drawing details.

• 한국통신학회논문지
• /
• 제39A권10호
• /
• pp.585-592
• /
• 2014

It is well known that serial belief propagation (BP) decoding for low-density parity-check (LDPC) codes achieves faster convergence without any increase of decoding complexity per iteration and bit error rate (BER) performance loss than standard parallel BP (PBP) decoding. Serial BP (SBP) decoding, such as horizontal SBP (H-SBP) decoding or vertical SBP (V-SBP) decoding, updates check nodes or variable nodes faster than standard PBP decoding within a single iteration. In this paper, we propose combined horizontal-vertical SBP (CHV-SBP) decoding. By the same reasoning, CHV-SBP decoding updates check nodes or variable nodes faster than SBP decoding within a serialized step in an iteration. CHV-SBP decoding achieves faster convergence than H-SBP or V-SBP decoding. We compare these decoding schemes in details. We also show in simulations that the convergence rate, in iterations, for CHV-SBP decoding is about $\frac{1}{6}$ of that for standard PBP decoding, while the convergence rate for SBP decoding is about $\frac{1}{2}$ of that for standard PBP decoding. In simulations, we use recently proposed generalized LDPC (GLDPC) codes with binary cyclic codes (BCC).

• 대한원격탐사학회지
• /
• 제24권5호
• /
• pp.497-506
• /
• 2008

The needs for digital models of real environment such as 3D terrain or cyber city model are increasing. Most of applications related with modeling and simulation require virtual environment constructed from geospatial information of real world in order to guarantee reliability and accuracy of the simulation. The most fundamental data for building virtual environment, terrain elevation and orthogonal imagery is acquired from optical sensor of satellite or airplane. Providing interoperable and reusable digital model is important to promote practical application of high-resolution satellite imagery. This paper presents the new research regarding representation of geospatial information, especially for 3D shape and appearance of virtual terrain. and describe framework for constructing real-time 3D model of large terrain based on high-resolution satellite imagery. It provides infrastructure of 3D simulation with geographical context. Web architecture, XML language and open protocols to build a standard based 3D terrain are presented. Details of standard-based approach for providing infrastructure of real-time 3D simulation using high-resolution satellite imagery are also presented. This work would facilitate interchange and interoperability across diverse systems and be usable by governments, industry scientists and general public.

• 한국산학기술학회논문지
• /
• 제16권6호
• /
• pp.4056-4066
• /
• 2015

유헬스 산업 활성화를 위해서 유헬스와 관련된 용어의 이해를 돕고, 의사소통을 증진시키기 위한 유헬스 표준용어를 개발할 필요가 있다. 본 연구의 목적은 유헬스 표준용어를 개발하고, 이를 위한 용어 표준화 절차에 대한 지침을 제시하는 것이다. 본 연구에서는 유헬스 관한 보고서, 용어집 및 정보통신기술협회 표준을 대상으로 자료수집, 용어추출, 용어정제, 용어선정 및 용어관리 절차를 통해 최종 187개의 유헬스 표준용어를 개발하였다. 연구결과, 국내 실정에 부합하는 유헬스 용어 표준화를 위한 지침을 제시하였으며, 이는 유헬스 표준용어의 정의, 분류, 구성요소, 절차에 따른 방법 및 원칙에 대한 상세한 내용을 포함하였다. 본 연구에서 제시된 유헬스 표준용어 및 용어 표준화 가이드라인은 개별 용어 도입 및 관리를 위한 비용을 절감하고, 정보교환을 용이하도록 도움으로써 유헬스 산업 전반의 효율성을 향상시킬 것이다.