• Journal of KIISE:Databases
• /
• v.31 no.5
• /
• pp.527-539
• /
• 2004

As more and more documents are published in XML, generating relational schemas to store XML documents in a relational database is also getting important. This paper describes a technique as well as its implementation to produce a relational schema from the XML Schema, a standard recently recommended by W3C. The DTD-based inlining technique cannot be applied to the XML Schema, because the XML Schema has many new features, which don't exist in the DTD. Various built-in data types, inheritance, and polymorphism, for example, strengthen the XML Schema, but make the generation of a relational schema from an XML Schema more difficult. We propose an XML Schema Inlining Technique, based on the previous work. The technique first maps various data types in the XML Schema to those of the relational database. After that, it construct the schema graph and the type graph from types and elements defined in the XML Schema. The relational schema is generated while traversing the type graphs. Besides, we describe techniques for handling xsi：type, used for the polymorphism, and the anon#moos type. We also propose a couple of heuristic methods for enhancing the performance of the system. Finally, we conducted experiments to show that our technique is better than the binary table approach.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.8
• /
• pp.1109-1115
• /
• 2008

The reproduction component traits are important components of sow efficiency. The objective of this study was to evaluate the phenotypic and genetic parameters of four reproduction component traits (age at puberty (AP), preweaning number dead (PND), weaning to service interval (WSI), and intra-individual SD in litter size (IISDLS)) of sows in two Chinese indigenous pig breeds. Available reproductive records including 22,591 piglets born from 2,054 litters by 574 Jiangquhai sows and 464 Meishan sows were used in this investigation. A set of mixed models and restricted maximum likelihood methodology were used for the multiple trait analyses of these traits. The results showed that the estimates of heritabilities (${\pm}$standard error) for AP, PND, WSI and IISDLS were $0.40{\pm}0.05$, $0.06{\pm}0.03$, $0.20{\pm}0.02$ and 0.09{\pm}0.03 in Jiangquhai sows, and $0.35{\pm}0.06$, $0.05{\pm}0.03$, $0.18{\pm}0.03$ and $0.10{\pm}0.04$ in Meishan sows, respectively. There was moderate genetic correlation between AP and WSI, while there were low genetic correlations between the other pairwise traits. The genetic correlations were positive for most of the pairwise traits, except for the one between AP and IISDLS. The results indicated that all traits except for AP were difficult to make genetic improvement by traditional selection methods due to low heritabilities and the favorable improvement of AP might result in unfavorable changes of IISDLS due to the trend of genetic antagonism.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.463-471
• /
• 2011

A novel $N_2O_2$ Schiff base ligand, N,N'-bis(4-methoxysalicylidene)phenylendiamine(4-$CH_3O$-Salphen), has been synthesized. It has been revealed that the compound is very useful for the spectrophotometric quantification of Fe(II) and Fe(III) ions in aqueous solutions, such as mineral water, hot spring water, sea water, and waste water. The optimum conditions for the quantitative analysis are the followings; [4-$CH_3O$-Salphen]=$4.0{\times}10^{-4}\;M$, DMF/$H_2O$=70/30(v/v), pH=3.4~3.8, T= at $55^{\circ}C$, and prereaction time=1.0 hr. The sample of single valence state was prepared by the preliminary oxidation or reduction using $H_2O_2$ ($5.0{\times}10^{-4}\;M$) and $NH_2OH{\cdot}HCl$ ($5.0{\times}10^{-4}\;M$). The quantitative analyses of Fe(II) and Fe(III) ion were performed by measuring the absorbance at 434 nm and 456 nm, respectively. The estimated mean values agreed well with the standard values within the range of 2.00~6.90%. The limit of detection was 27.9 ng/mL for Fe(II) and 55.8 ng/mL for Fe(III).

• The Journal of Korean Academic Society of Nursing Education
• /
• v.3 no.2
• /
• pp.125-149
• /
• 1997

The role of nurses in Korea is undergoing significant change because of the economic development, medical insurance and the change of family structure. It will be predicted that the nurse's role is extended more and more in the 21C. So the nursing curriculum in nursing education is the most important thing to prepare a good quality of nursing. Furthermore qualified curriculum calls for the development of desirable attitudes in nursing students. The purpose of this descriptive study was to collect data which can be used to facilitate the process of encouraging every college to assume greater responsibility for needed curriculum and educational conditions related to preperation of nursing students for various developed society toward 21C. A total sixty one nursing college were surveyed by mail during August and October 1997. Thirty six college(59%) responded. The data was analyzed by using SAS program. The results are as follows : 1) 32 college(88.9%) answered that they have Nursing educational philosophy and goal. 2) Total credits are 136credits, and the students who don't have teacher's course need 128 credits. 3) Nursing essential subjects comprise 84 credits, and nursing clinical practice subjects are 19 credits. 4) 15 colleges(41.7%) have their own hospital for student's clinical practice, 36 college(100%) take the community nursing practice in public health center, 34college(94.4%) take the school health nursing practice. 5 college(13.9%) have industrial nursing practice. 5) 3-year nursing college have 6.4 professor, 3.5 assistent professor, 1.9 and 3.4 full faculty and 7.4 part time faculty. We sugest that 3-year college have to have nursing educational philosophy and goal in terms of nursing educational standard. To improve the quality of nursing education every college should try to increase the number of professor and to contact qualified hospital for students clinical practice.

• Journal of Service Research and Studies
• /
• v.3 no.2
• /
• pp.33-44
• /
• 2013

As the Internet and mobile services increase, the use of wired/wireless web contents services increase and the demand for various contents explosively grows. To survive in competitive market, and to minimize the errors and warnings for web accessibility and standardization, and then to maximize the web usability, the periodical evaluation for web site should be performed with the events of web marketing and campaign. Through the web evaluation, the errors for technical programming language and contents offering can be found and diagnosed. In this paper, the quantitative and qualitative evaluation method for web site providing web contents are presented, and the analytic results for the 138 home pages in domestic are evaluated to validate the quantitative methodology. The accessibility, standardization, and usability factor are adopted for the evaluation in which accessibility is evaluated for perceivable, operable, understandable, and robust discipline with K-WAH(Korea-Web Accessibility Helper) tool, the standardization are measured for the number of errors and warnings in technical language with the W3C validator, and finally the usability factor is analyzed for the number of visits, average visit duration, and bounce rate with Google Analytics. In addition to, the quantitative analysis is also performed with the consideration of cost for construction and operation of web site. From the results, in the case of total score of 100 in conversion with relative weight, the average and standard deviation are evaluated to be 55 and 14, respectively. The correlation analysis indicates that the coefficient is estimated as 0.058, and then correlation between the quantitative results and cost is evaluated to be a little positive.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.10
• /
• pp.1437-1449
• /
• 2006

Thirty six pre-weaned Barbari kids at 4 months age were reared on four rations computed using coarse cereal grains and by-products of pulses and oil seeds with Crude Protein (CP) and Total Digestible Nutrients (TDN) of 12 and 55% (Low protein Low energy); 12 and 60% (Low protein High energy); 14 and 55% (High protein Low energy); and 14 and 60% (High protein High energy), respectively. After 180 days on feed, male animals ($4{\times}5=20$) were slaughtered to study the effect of diet on carcass characteristics and meat quality. To asses the effect, if any, of such diet on product quality, meat balls were prepared and evaluated for quality changes when fresh as well as during storage ($-20{\pm}1^{\circ}C$). Feeding a ration with CP12 and TDN 60% (LH) to kids produced animals with highest slaughter weight (20.3 kg) yielding higher carcass weight and dressing percentage, lean (65.6%) and fat (6.6%) contents with low bone and trim losses. Although total variety meat yield was markedly higher in HL, the non-carcass fat deposition was relatively higher in LH carcasses. The water activity ($a_w$) of fresh goat meat ranged from 0.994-0.995 and total cholesterol 72.8-90.5 mg/100 g meat. The pH was high in HL and HH meat resulting in decreased ($p{\leq}0.05$) extract release volume (ERV). Meat balls were prepared using meat obtained from goats fed different rations (treatments) and stored at $-20{\pm}1^{\circ}C$. They were evaluated on day 0 and months 1, 2, 3, 4 for physicochemical, microbiological and organoleptic changes. Overall moisture (%), $a_w$, TBA number and pH value were 67.9, 0.987, 0.17, 6.6 respectively and were not affected by treatments except pH that was significantly ($p{\leq}0.01$) lower on LH. As the storage period advanced moisture, pH, $a_w$ and TBA number increased irrespective of treatments. Feeding various diets had no marked effect on microbial load of meat balls but with increasing storage period Standard Plate Count (SPC) and psychrotrophs declined ($p{\leq}0.01$). Treatment LL and LH produced meat balls with better flavour.

• Journal of the Korea Concrete Institute
• /
• v.25 no.5
• /
• pp.497-508
• /
• 2013

This paper introduces a numerical model which can evaluate the fire-resistant capacity of reinforced concrete members. On the basis of the transient heat transfer considering the heat conduction, convection and radiation, time-dependent temperature distribution across a section is determined. A layered fiber section method is adopted to consider non-linear material properties depending on the temperature and varying with the position of a fiber. Furthermore, effects of non-mechanical strains of each fiber like thermal expansion, transient strain and creep strain are reflected on the non-linear structural analysis to take into account the extreme temperature variation induced by the fire. Analysis results by the numerical model are compared with experimental data from the standard fire tests to validate an exactness of the introduced numerical model. Also, time-dependent changes in the resisting capacities of reinforced concrete members exposed to fire are investigated through the analyses and, the resisting capacities evaluated are compared with those determined by the design code.

• The KIPS Transactions:PartD
• /
• v.15D no.6
• /
• pp.861-872
• /
• 2008

As rapid development of computing environment, field of automatic identification research which interoperates with various physical objects and digital information is making active progress. Although the automatic identification system is widely used in various industries, application of automatic identification system in the field of medical health doesn't reach other industry. Therefore research in medical health supplies such as medical equipment, blood, human tissues and etc is on progress. This paper suggests the application of automatic identification technology for biological resources which is core research material in human genome research. First of all, user environment requirements for the introduction of automatic identification technology are defined and through the experiments and research, barcode is selected as a suitable tag interface. Data Matrix which is 2D barcode symbology is chosen and data schema is designed based on UCC/EAN-128 for international defecto standard. To showapplicability of proposed method when applied to actual environment, we developed, tested and evaluated application as following methods. Experiments of barcode read time at 196 and 75 below zero which is actual temperature where biological resources are preserved resulted read speed of average of 1.6 second and the data schema satisfies requirements for the biological resources application. Therefore suggested method can provide data reliability as well as rapid input of data in biological resources information processing.

• Korean Journal of Food Science and Technology
• /
• v.30 no.6
• /
• pp.1415-1419
• /
• 1998

In order to evaluate the safety of greenhouse horticultures, a large number sample sources were collected, and the fungi of Aspergillus sp. and Penicillium sp. were isolated from them. Indirect competitive ELISA method and high performance liquid chromatography (HPLC) were applied to confirm the ochratoxin A producing abilities of isolated strains. One hundred ninety two sample sources including soil, pepper, strawberry and water mellon were collected for fungi isolation from western Gyeongnam, Andong and Gyeongbok. One hundred forty two strains of Aspergillus sp. and one hundred fifty three strains of Penicillium sp. were isolated respectively from them. The isolated fungi were tested for the production of ochratoxin A by ELISA. After culture of them on the modified sucrose low salt medium at $28^{\circ}C$ for 15 days, we found that five strains of Penicillium sp. produced ochratoxin A at the levels of $0.084{\sim}2.128\;{\mu}g/mL$. Among them, #129-2 strain isolated from water melon, showed the highest level of ochratoxin A as $2.128\;{\mu}g/mL$ broth. However, all of isolated Aspergillus sp. didn't produce ochratoxin A. When we compared the results of ELISA method with HPLC method, ochratoxin A production of each isolated strains showed very similar levels.

• Advances in Energy Research
• /
• v.1 no.2
• /
• pp.147-163
• /
• 2013

The world faces several issues of energy crisis and environmental deterioration due to over-dependence on single source of which is fossil fuel. Though, fuel is needed as ingredients for industrial development and growth of any country, however the fossil fuel which is a major source of energy for this purpose has always been terrifying thus the need for alternative and renewable energy sources. The search for alternative energy sources resulted into the acceptance of a biofuel as a reliable alternative energy source. This work presents the study of optimization of process of transesterification of vegetable oil to biodiesel using NaOH as catalyst. A $2^4$ factorial design method was employed to investigate the influence of ratio of oil to methanol, temperature, NaOH concentration, and transesterification time on the yield of biodiesel from vegetable oil. Low and high levels of the key factors considered were 4:1 and 6:1 mole ratio, 30 and $60^{\circ}C$ temperatures, 0.5 and 1.0 wt% catalyst concentration, and 30 and 60 min reaction time. Results obtained revealed that oil to methanol molar ratio of 6:1, tranesetrification temperature of $60^{\circ}C$, catalyst concentration of 1.0wt % and reaction time of 30 min are the best operating conditions for the optimum yield of biofuel from vegetable oil, with optimum yield of 95.8%. Results obtained on the characterizzation of the produced biodiesel indicate that the specific gravity, cloud point, flash point, sulphur content, viscosity, diesel index, centane number, acid value, free glycerine, total glycerine and total recovery are 0.8899, 4, 13, 0.0087%, 4.83, 25, 54.6. 0.228mgKOH/g, 0.018, 0.23% and 96% respectively. Results also indicate that the qualities of the biodiesel tested for are in conformity with the set standard. A model equation was developed based on the results obtained using a statistical tool. Analysis of variance (ANOVA) of data shows that mole ratio of ground nut oil to methanol and transesterification time have the most pronounced effect on the biodiesel yield with contributions of 55.06% and 9.22% respectively. It can be inferred from the results various conducted that vegetable oil locally produced from groundnut oil can be utilized as a feedstock for biodiesel production.