• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.2
• /
• pp.177-187
• /
• 2000

In the past several years, many systems which adopted ring topology with high-speed unidirectional point-to-point links have emerged to overcome the limit of bus for interconnection network of clustered multiprocessor system. However, rapid increase of processor speed and performance improvement of local bus and memory system limit scalability of system with point-to-point link of standard bandwidth. Therefore, necessity to extend bandwidth is emphasized. In this paper, we adopt PANDA system as base model, which is clustering-based multiprocessor system. By simulating a model adopting commercial processor and local bus specification, we show that point-to-point link is bottleneck of system performance, and bandwidth expansion by more than 200% is needed. To expand bandwidth of interconnection network, it needs excessive design cost and time to develop new point-to-point link with doubled bandwidth. As an alternative to double bandwidth, we propose several ways to implement dual ring -simple dual ring, transaction-separated dual ring, direction-separated dual ring- by using off-the-shelf point-to-point links with IEEE standard bandwidth. We analyze pros. and cons. of each model compared with doubled-bandwidth single ring by simulation.

• Journal of Korean Society of Transportation
• /
• v.31 no.3
• /
• pp.74-85
• /
• 2013

We analyze the efficiency of congestion pricings and transit subsidies in the spatial micro-economic model based on a general equilibrium environment. In this setting, we decompose the total welfare change into component factors and identify the reason of the change in the efficiency caused by policy instruments; these component factors are divided into indirect factors and direct factors including of origin-destination and mode choices. We set up the model as adding mode choice to the standard format in the fashion of Anas and Kim (1996) and extend the methodology proposed by Yu and Rhee (2011) and Rhee (2012) for deriving theoretical and analytical solution. Most of welfare gain comes from the modal shift from car to bus. The relative efficiency of subsidies in relation to the first-best pricing is lower than it of congestion pricings although the change in bus share by subsidies is similar to it by congestion pricing. Subsidies give rise to more modal shift from a car to a bus for long-distance commuting than it caused by congestion pricings. As the increase of bus share for long-distance commuting leads to the increase of cross-commuters passing through CBD, the welfare gain by subsidies is lower than it by congestion pricings.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.133-140
• /
• 2016

The Ministry of Land, Infrastructure and Transport has introduced low-floor buses, which are convenient for passengers getting on and off the bus and for the handicapped. The standard bus model is 11 m long and uses compressed natural gas (CNG). However, this model has drawbacks in narrow rural road conditions such as those in farming and fishing villages and mountainous areas, as well as difficulty in refueling since CNG facilities are not readily available. In this study, running resistance values were obtained by coasting performance tests on actual roads using a Tata Daewoo LF-40 model with three different weight conditions: curb vehicle weight (CVW), half vehicle weight (HVW), and gross vehicle weight (GVW).The test methods include WHVC, NIER-06, and constant-speed driving at 60 km/h. These tests were used to measure the fuel economy of vehicles other than the target vehicles to obtain the combined fuel economy. The energy efficiency was highest in the case of CVW. In the WHVC mode, the fuel consumption rates of HVW and GVW were typically 3.5% and 12% higher than that of CVW, respectively. In constant-speed driving, the fuel efficiency of HVW was higher than that of CVW. Further research is required to analyze the exhaust gas data.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.4
• /
• pp.144-152
• /
• 2013

PRT(Personal Rapid Transit) system is a new transportation system which will meet increasing demands of traffic in Korea. It is also an environment-friendly transportation and automatically operated. For these reasons, researches on the PRT system are actively undergoing, but the PRT vehicles have different forms of subway, bus, etc. There are no design standards to evaluate structural integrity, yet. In this paper, Structural design specifications are derived, which are based on the performance test standard for EMU and the ASCE-APM standards. We also perform the static and fatigue analyses by FE simulation and suggest strategies to improve an initial structure design. In addition, we derived the design specifications for energy-absorbing structures to meet the conditions of the collision scenarios predefined from a view point of operation safety.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.10 s.352
• /
• pp.126-133
• /
• 2006

This paper describes an AMBA-based IP to perform forward and inverse transform and quantization required in the H.264 video compression standard. The transform and quantization circuit was optimized for area and performance. The AHB wrapper was added to the circuit for the AMBA-based operation. The user of the IP can specify how long the bus may be occupied by the IP and also where the video data are stored in the external memory. The function of the proposed IP based on AMBA Specification was verified on the platform board with Xilinx FPGA and ARM9 processor. We fabricated an MPW chip using $0.25{\mu}m$ standard cells and observed its correct operations on silicon.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1229-1239
• /
• 1996

The increase of additional information broadcasting of TV demands a graphic overlay processor. This paper is about the design, implementation and testing of a graphic overlay processor called by KBPS decoder ASSP (Applicatio n Specific Standard Product) which is compliance with Korea Broadcast Programming System. KBPS decoder ASSP consists of embedded 8 bit microprocessor Z80, graphic overlay controller, KBPS schedule decoder, memory controller, priority interrupt controller, MIDI controller, infrared raccoon receiver, async scrial communication controller, timer, bus controller, universal parallel input-output port and serial-parallel interface. The 0.8 micron CMOS Sea of Gate is used to implement the ASSP in amount of about 31,500 gates, and it is running at 14.318MHz.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.5
• /
• pp.746-755
• /
• 2009

Recently, NMEA2000 became the de facto standard of the communication protocol for the instrument level network in vessels, and it is anticipated that most of the vessels will be equipped with the sensors and actuators based on this protocol. The conventional serial communication specifications such as RS-232, RS-485, or even NMEA0183 are single-talker/multiple-listener and interconnection among multiple sensors and/or actuators usually results in a bundle of wires. On the other hand, NMEA2000 is a true bus type(multiple-talker/multiple-listener) protocol and theoretically up to 256 instruments can be hot-plugged. With the advent of the protocol, it is necessary to consider a new type of monitoring system for the instruments in vessels: In most traditional serial communication environments, a dedicated monitor or user interface was necessary for each sensor or actuator as it was simply not easy to collect data in a single place. With NMEA2000, the collection of various types of information is simple. An embedded system can be employed to combine, to arrange and to display informations from various types of devices. Assuming that the actuators and sensors on a vessel are interconnected by NMEA2000 standard, we devise a tentative interactive vessel monitoring system in which the following 4 kinds of informations are collected and delivered: the navigation, engine, weather and tanks informations.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.659-665
• /
• 2003

This paper presents a Train Communication Network simulator (TCNS) that can be used to evaluate the performance of TCN. TCN was accepted as the standard of the protocol for the communication network in trains. We carry out some simulation tests using the TCNS to show practical uses of the simulator. Results of some simulation tests are also reported. This paper presents a Train Communication Network simulator(TCNS) that can be used to evaluate the performance of TCN. TCN was accepted as the standard of the protocol for the communication network in trains. TCN of fieldbus was adopted as international standardization IEC 61375 in 1999. It has been operating on G7 train in korea. This paper developed TCNS(Train Communication Network simulator) as a simulator for performance evaluation. We can verify TCNS for preventing many kinds of occurring problems between the devices in data-communication. This study was developed TCNS as a simulator for the performance evaluation. We analyzed correlation between token, transmission data per paket and transmission speed of bus, through the TCNS, also analyzed result according to error rate of TCN. We carry out some simulation tests using the TCNS to show practical uses of the simulator. Results of some simulation tests are also reported.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.909-911
• /
• 2003

The almost pole transformers are constructed with tank, cover, clamp etc., that contains the insulation oil, core, coil, terminals, bus and the other accessories. If some fault current will be flown by some trouble or accident, interior pressure of the transformer shall be very quickly rise, and mechanical components or insulation oil from the transformer enclosure shall be propelled or dropped from the tank. For the prevention of the above accident, recently the pole transformers should be done 'the Design Tests for Fault Current Capability' according to ANSI C57.12.20(1997) There are two tests method in this standard, Test Number I with a high current arcing fault, without internal fusible elements, shall be conducted on rack enclosure with its minimum designed air space. Test Number II with an internal fusible element, shall be conducted on each enclosure diameter utilizing the internal fusible elements. KEPCO recently request to be done the 'Design Tests for Fault Current Capability' for pole transformers according to KEPCO's standard ES141-$533{\sim}545$, PS141-$482{\sim}518$ and RS141-$611{\sim}628$ that is same with Test Number I of ANSI C57.12.20.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1743-1753
• /
• 2011

Seoul Metropolitan Government has performed alternative transit system, light rail transit(LRT), for settling the problems of urban public transit system based on conventional bus service and heavy rail transit(HRT). LRT projects of total 8 lines(about 73.6km), including Ui-Sinseol line, have been planned as Build-Transfer-Operate(BTO) projects. For the first LRT, Ui-Sinseol line, however, design of structure had met standard for design of HRT, because of no domestic design code for LRT when participates of Ui-Sinseol project submitted the design proposal. This case study reports a successful example of LRT design minimizing the scale of stations designed in base of HRT code. The problems, like oversized structures compared with LRT vehicles, excessive costs for construction, had been resolved through negotiations with the participates of Ui-Sinseol line. Result suggests that present and future costs for construction and maintenance of the LRT projects in Seoul be considerably reduced in advance.