• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.4
• /
• pp.589-593
• /
• 2016

Microbial fuel cell (MFC) can produce electricity from oxidation-reduction of organic and inorganic matters by electrochemically active bacteria as catalyst. Stacked MFCs have been investigated for overcoming low electricity generation of single MFC. In this study, two-typed stacked-MFCs (submerged-flat and stand-falt) were operated according to electrode connection for optimal stacked technology of MFC. In case of submerged-flat MFC with all separator electrode assembly (SEA) sharing anode chamber, MFC with mixed-connection showed more voltage loss than MFC with single-connection method. And MFC stacked in parallel showed better voltage production than MFC stacked in series. In case of stand-flat MFC, voltage loss was bigger when SEAs sharing anodic chamber only were connected in series. Voltage loss was decreased when SEAs parallel connected SEAs sharing anodic chamber were connected in series.

• Korean Journal of Materials Research
• /
• v.21 no.6
• /
• pp.320-326
• /
• 2011

Flat rolling of wire is an industrial process used to manufacture electrical flat wire, medical catheters, springs, piston segments and automobile parts, among other products. In a multi-step wire flat rolling process, a wire with a circular crosssection is rolled at room temperature between two flat rolls in several passes to achieve the desired thickness to width ratio. To manufacture a flat wire with a homogeneous microstructure, mechanical and metallurgical properties with an appropriate pass schedule, this study investigated the effect of each pass schedule (1stand ~ 4stand) on the microstructures, mechanical properties and widths of cold rolled high carbon steel wires using four-pass flat rolling process. The evolutions of the microstructures and mechanical properties of the widths of cold rolled wires during three different pass schedules of the flat rolling process of high carbon wires were investigated, and the results were compared with those for a conventional eight-pass schedule. In the width of cold rolled wires, three different pass schedules are clearly distinguished and discussed. The experimental conditions were the same rolling speed, rolling force, roll size, tensile strength of the material and friction coefficient. The experimental results showed that the four-pass flat cold rolling process was feasible for production of designed wire without cracks when appropriate pass schedules were applied.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.27-36
• /
• 1999

To have high flatness quality of hot rolled strip in the hot strip finishing mill train, a new inter-stand tension profile measuring device of segmented looper roll type(coined as Flatness Sensing Inter-stand Looper, FlatSIL) and a new flatness control system have been developed in this study. The device measures the strip tension profile across the strip width and informs the strip wave pattern to new flatness control system where work roll bending mode to relieve the strip wave is determined. The existing automatic shape control system which uses laser type shape-meter installed at the outlet of the last finishing mill stand strip tension between down coiler and last finishig mill since the latent wave concealed by the strip tension between down coiler and last finishing mill stand cannot be measured by the laser distance-meter. Thus the existing shape control system is not able to control the flatness through the full strip length. The new flatness control system, however, works for full strip length during strip rolling as far as the tension profile measuring device and work roll bender are on. With the new flatness control system, work roll bender is automatically controller to minimize the latent wave of the running strip and the flatness quality as well as strip travelling stability has been noticeably improved from strip head through body to tail.

• Transactions of Materials Processing
• /
• v.26 no.4
• /
• pp.228-233
• /
• 2017

In flat rolling mills, demands for precise process set-up and control are increasing than ever before. Consequently, it is imperative to establish a novel approach, which would provide valuable information regarding the detailed aspects of deformation behavior of the strip, and rolls during rolling. In this paper, we present a finite element (FE) approach for 3-D coupled analysis of the elastic-plastic deformation of the strip and the elastic deformation of rolls in the roll-stack of a mill stand.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.1
• /
• pp.28-33
• /
• 1996

This experiment was carried out at National Crop Experiment Station in 1994 to obtain basic information of growth characters and yield of rice under various seeding methods in direct seeding on dry paddy. Hwaseongbyeo sown on April 27 by flat drill seeding, high ridged drill seeding and hill seeding under different seed conditions, soil convering after seeding and irrigation methods. Nitrogen applied 150kg /ha by 3 times split application at rate of 40:30:30％ (basal: 5th leaf stage:panicle initiation stage). Seedling stands were higher in flushed irrigation water after seeding than in irrigation at 3rd leaf stage, and it also was higher in high ridged drill seedings than in flat drill seedings. Days for seedling stand, heading date were shorten 6~10 days, 2~3 days by flushed irrigation water after seeding, respectively. Number of tiller was more in high ridged drill seedings than conventional seedling method(Flat drill seeding ＋ intact seed ＋ soil covering after seeding ＋ irrigation at 3rd leaf stage after seedling stand) at early growth stage, but the most tiller number was highest in developed seeding method(Flat drill seeding ＋ soaked seed ＋ non soil covering after seeding ＋ fulshed irrigation water after seeding) at heading stage among used seeding methods. Lodging index was slightly high in high ridged drill seeding and conventional seeding. Field lodging was degree 1 in high ridged drill seedings and developed seeding, Milled rice yield in developed seeding was increased 7％ compaired with conventional seeding(5.35t /ha).

• Korean Journal of Heritage: History & Science
• /
• v.45 no.2
• /
• pp.4-19
• /
• 2012

There remain many royal tombs of the Goryeo Dynasty in Gaeseong and Ganghwa. During the Goryeo Dynasty, these royal tombs were taken over tradition of tomb construction style from previous generation, and they completed their own inventive style. Furthermore they handed down those style to the Joseon Dynasty. The area of tomb was divided into 3 or 4 steps, and stone figures and T-shaped houses for sacrifice were arranged on each steps. It was the stone chamber of lateral opening style which had an entrance to southward, and it was formed as a rectangular box-shaped with a pile of stone walls and a flat ceiling. There was a coffin stand in the middle of floor, and traditional bricks were around them. The wall side and ceiling had been whitewashed and painted pictures. These are general characteristics for the tomb construction style of the Goryeo Dynasty. By the way, we can notice a number of features except those general things with inspection in detail. In early days, we confirmed 1step-parallel fulcrum ceiling, coffin stand of all in one stone, bier of burial artifact, and mural of plant material as a set, but they were changed as flat ceiling, Red-stone wall with rectangular stone, coffin stand set as stone pillar through the period of transitional form as of in the late 12th century. In case of several royal tombs, the fragments of king's epitaph which were confirmed from tombs could be defined owners clearly, and there were considerable timing difference between the large numbers of celadons which were excavated with the fragments of king's epitaph and recording chronologically of stone chamber structure. The reason for timing difference is that posterity artifacts were buried through repairing courses by occasion of destruction caused by robbing of the royal tombs. Meanwhile I inferred the existing hypothesis about owners of royal tombs and autonym ones in comparison the burial spot direction of hypothesis ones and outcomes of excavation. Therethrough, some hypothesis about owners of royal tombs such as Myung-neung which was assumed as tomb of the King Choongmok were not correct.

• Journal of Mechanical Science and Technology
• /
• v.18 no.3
• /
• pp.379-387
• /
• 2004

A novel flatness sensing system which is called the Flatness Sensing Inter-stand Looper(FlatSIL) system is suggested and a self-tuning PI control system using the FlatSIL is designed for improving the flatness of hot strip in finishing mill processes. The FlatSIL system measures the tension along the direction of the strip width by using segmented rolls, and the tension profile is approximated through the tension of each segmented roll. The flatness control system is operated by using the tension profile. The proposed flatness control system as far as the tension profile-measuring device works for the full strip length during the strip rolling in finishing mills. The generalized minimum variance self-tuning (GMV S-T) PI control method is applied to control the flatness of hot strip which has a design parameter as weighting factor for updating the PI gains. Optimizing the design parameter in the GMV S-T PI controller, the Robbins-Monro algorithm is used. It is shown by the computer simulation and experiment that the proposed GMV S-T PI flatness control system has better performance than the fixed PI flatness control system.

• Journal of Wetlands Research
• /
• v.7 no.2
• /
• pp.145-158
• /
• 2005

To clarify the growth of Phragmites communis along the distance from the land, and investigate the effects by cutting the aboveground part, the height and dry weight of this species were surveyed from 2000 to 2001 on natural stands at tidal-flat of Hogog-ri, Jugog-myeon, Whaseong-city, Gyeonggi Province. At the stand near the rice paddy, mean density, mean height, dry weight per plant and dry weight per unit area of P. communis were $122.67plants/m^2$, 100.36 cm, 4.241 g, and $537.574/m^2$, respectively. The sizes of P. communis conspicuously increased from seaside to land side. At the stand isolated from the land, these properties were $102.30plants/m^2$ (in density), 43.894 cm (in height), 0.779 g/plant and $73.495g/m^2$, respectively, and the sizes of P. communis at the land side were relatively similar to those at sea side. The cutting of aboveground part resulted to the decrease of density and dry weight per unit area in next year, but did not influence on the height and weight per plant of P. communis.

• Physical Therapy Rehabilitation Science
• /
• v.4 no.2
• /
• pp.87-93
• /
• 2015

Objective: Balance is a preceding task for functional activities in daily activities as well as community-dwelling activities. To learn skilled and functional activities, it is also necessary to imagine an appropriate and effective movement representation used to plan and execute the functional activities. The purpose of this study was to evaluate the effects of balance imagery of semi-tandem stance on a flat floor and balance beam on balance abilities for elderly and young adults. Design: Cross-sectional study. Methods: Fifteen elderly and thirty-four young adults were enrolled in this study. In order to determine whether there is a change in postural control ability according to the different imagery training methods used, standing static balance measurements were performed. According to the therapist's instructions, participants were to stand in a semi-tandem position on the Good Balance System for 1 minute while imagining that they were standing on a balance beam, and while the postural control abilities was assessed. Results: Postural control was significantly different in balance ability of semi-tandem stance on a flat floor compared to on a balance beam in both geriatrics and young adults. Postural sway was more significantly decreased in young adults than older adults during balance imagery of semi-tandem stance on a flat floor as well as on balance beam (p<0.05). Conclusions: The results of this study suggest that the ability to mentally represent their actions was similar in older adults compared to young adults, although older adults showed a drop in efficiency of postural control more than young adults.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.3
• /
• pp.85-91
• /
• 2007

This study was carried out to minimize the lifting force of a two hinge type stand mechanism. This unit is designed for the display devices in order to enhance the ergonomics for effective height adjustment and maintenance at any preferred position. The unit will be very useful for the mechanism fabricated with a coil spring and disc springs as a torque generator. The maximum and the minimum torque value should be calculated initially for the smooth lift. And the reasonable torque distribution is necessary to prevent any auto lift and auto dropping at any position because the torque generated by coil spring is more sensitive than disc spring in tilting the position. Therefore, the analysis of the coil spring is requisite to issue the specific torque value depending on the distorted angle with securing reliability of a long time storage condition. After the theoretical torque value was calculated, the evaluation was carried out by making a proto-type sample, then distorted angle was updated by experiment. The result of this study can readily be applied to various units for the optimization of the smooth lift.