• 한국통신학회논문지
• /
• 제30권2A호
• /
• pp.90-97
• /
• 2005

일반적으로 DAB 시스템은 크게 stand-alone 방식과 PC/PDA 기반 방식으로 구분할 수 있다. PC/PDA 기반 방식은 stand-alone 방식에 비하여 휴대성이 떨어지나 연결된 PC/PDA의 메모리와 오디오/비디오 디코더 등 다양한 리소스를 이용할 수 있는 장점이 있다. 본 논문에서 구현한 DAB 수신기는 USB 인터페이스를 이용한 PC 기반의 수신기 시스템으로 USB 인터페이스 브리지는 FPGA와 EZ-USB 개발 키트를 이용하여 설계하였으며 실험을 위하여 기존의 stand-alone 방식의 DRK-026 DAB 수신기를 이용하여 PC 기반의 수신기를 구현하였다. USB 인터페이스 브리지는 시리얼 데이터를 USB 패킷 형태로 변환시켜주며 모든 신호는 하드웨어적으로 제어한다. 구현한 PC 기반 DAB 수신기의 동작 여부는 DAB 수신기로부터 오디오 데이터를 수신하여 USB 인터페이스를 통하여 PC에 전송한 후 디코딩 기능을 수행하는 것으로 확인하였다.

• 전력전자학회논문지
• /
• 제18권1호
• /
• pp.63-71
• /
• 2013

This paper describes the coordinated droop control method for stand-alone type DC micro-grid to improve reliability and utilization of distributed generations and energy storage. The stand-alone type DC micro-grid consists of several distributed generations such as a wind power generation, solar power and micro-turbine, and energy storage. The proposed method which is based on autonomous control method shows high reliability and stability through coordinated droop control of distributed generations and energy storage and also capability of battery management. The operation of stand-alone type DC micro-grid was analyzed using detail simulation model with PSCAD/EMTDC software. Based on simulation results, a hardware simulator was built and tested with commercially available components and performance of system was verified.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.1027-1036
• /
• 2017

The brushless doubly-fed induction generator (BDFIG) is a new type of dual stator winding induction generator. In such a generator, both the power winding (PW) and the control winding (CW) are housed in the stator. This paper presents the performance characteristics of a stand-alone BDFIG operation system. A new T-type steady-state model of a BDFIG is proposed. This model is more suitable for the performance analysis of stand-alone BDFIGs than the conventional Π-type steady-state model and the simplified inner core steady-state model. The characteristics of the power flow and CW current are analyzed by detailed mathematical derivations on the basis of the proposed T-type steady-state model. The analysis results are verified by experiments, which are carried out on a prototype BDFIG. The results of the performance analysis contribute to simplifying the control circuit, improving the control performance, and selecting an appropriate BDFIG for actual industrial applications.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권2호
• /
• pp.121-125
• /
• 2014

This paper presents a successful stand-alone pico-hydro generation system using a high-efficiency interior permanent-magnet (IPM) synchronous generator. A 1-kW 4-pole V-type IPM generator with low voltage regulation is used for laboratory test in stand-alone hydro energy conversion system. It has been found from experimental results that the constant output voltage is supplied stably by the proposed system under wide speed range.

• 전기학회논문지
• /
• 제58권1호
• /
• pp.35-41
• /
• 2009

This paper proposes a stand alone type single-phase fuel cells micro-source with a voltage sag compensator for compensating the ac output voltage variations (sag or swell) of micro-source. The proposed micro-source is consist of a PEM(polymer electrolyte membrane) fuel cells simulator, a full bridge de converter, a 60Hz PWM(pulse width modulation) VSI(voltage source inverter), and a voltage sag compensator. Voltage sag compensator is similar to the configuration of hybrid series active power filter, and it is directly connected to micro-source through the injection transformer. Compensation algorithm of a voltage sag compensator adopts a single phase p-q theory. Effectiveness of the proposed the system is verified by the PSIM(power electronics simulation tool) simulation in the steady state and transient state which the proposed system is able to simultaneously compensate the harmonic current and source voltage sag or swell.

• 전력전자학회논문지
• /
• 제18권5호
• /
• pp.448-457
• /
• 2013

This paper proposes a control method under stand-alone operating mode for distributed-module type photovoltaic power conditioners. In conventional schemes, there are some problems of a controller saturation in the DC-link (or load) voltage controller when overly-heavy load, light load, and the generated PV power reduction occurs, as well as when a transition occurs from an overly-loaded to normal conditions. To overcome these problems, the proposed controller method switches the main control target from DC-link voltage to the maximum power point, which is closer to the stable operating point when it returns to normal operating conditions. For the analysis, a state-plane trajectory was given and the circuit analysis by PSIM simulation was done. For the verification, a prototype hardware with 110[W] and 50[W] dual photovoltaic modules has been implemented. From the results, it can be seen that PV power tracking is successfully done with the proposed method even under a stand-alone operation mode.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.865-870
• /
• 2003

A motion controller has been used variously in industry such as semiconductor manufacture equipment, industrial robot, assembly/conveyor line applications and CNC equipment. There are several types of controller in motion control. One of these is a PC-based motion controller such as PCI or ISA, and another is stand-alone motion controller. The PC bus-based motion controller is popular because of improving bus architectures and GUI (Graphic User Interface) that offer convenience of use to user. There are some problems in this. The PC bus-based solution allows for only one of the form factors, so it has a poor flexibility. The overall system package size is bigger than other motion control system. And also, additional axes of control require additional slot, however the number of slots is limited. Furthermore, unwieldy and many wirings come to connect plants or I/O. The stand-alone motion controller has also this limit of axes of control and wiring problems. To resolve these problems, controller must have capability of operating as stand-alone devices that resides outside the computer and it needs network capability to communicate to each motion device. In this paper, a network-based stand-alone motion system is proposed. This system integrates PC and motion controller into one stand-alone motion system, and uses CAN (Controller Area Network) as network protocol. Single board computer that is type of 3.5" FDD form factor is used to reduce the system size and cost. It works with Windows XP Embedded as operating system. This motion system operates by itself or serves as master motion controller that communicates to slave motion controller. The Slave motion controllers can easily connect to master motion system through CAN-network.

• KIEE International Transactions on Power Engineering
• /
• 제3A권1호
• /
• pp.27-34
• /
• 2003

In this paper, the power conditioner composed of the stand-alone single-phase squirrel cage rotor type self-excited induction generator (SEIG) driven by prime movers such as a wind turbine and a micro gas turbine (MGT) is presented by using the steady-state circuit analysis based on the two nodal admittance approaches using the per-unit frequency in addition to a new state variable defined by the per-unit slip frequency along with its performance evaluations for the stand-alone energy utilizations. The stande-alone single-phase SEIG operating performances in unregulated voltage control loop are then evaluated on line under the conditions of the speed change transients of the prime mover and the stand-alone electrical passive load power variations with the simple theoretical analysis and the efficient computation processing procedures described in the part I of this paper. In addition, a feasuible PI controlled feedback closed-loop voltage regulation scheme of the stande-alone single-phase SEIG is designed on the basis of the static VAR compensate. (SVC) and discussed in experiment for the promising stand-alone power conditioner. The experimental operating performance results are illustrated and give good agreements with the simulation ones. The simulation and experimental results of the stand-alone single-phase SEIG with the simple SVC controller for its stabilized voltage regulation prove the practical effectiveness of the additional SVC control loop scheme including the PI controller with fast response characteristics and steady-sate performance improvements.

• Journal of Gastric Cancer
• /
• 제21권2호
• /
• pp.122-131
• /
• 2021

Purpose: To date, there are no promising treatments for gastric carcinoma with peritoneal metastasis. Some researchers have suggested a survival benefit of gastrectomy in select patients. This study investigated the survival of gastric carcinoma patients with stand-alone peritoneal metastasis according to the type of treatment modality. Materials and Methods: We reviewed the data of 132 patients with gastric carcinoma and stand-alone peritoneal metastasis. We performed gastrectomy when the primary tumor was deemed resectable and systemic chemotherapy was administered. We analyzed patient survival according to the type of treatment, and the prognostic value of gastrectomy was evaluated in univariate and multivariate models. Results: Among all patients, 70 underwent gastrectomy plus chemotherapy, 20 underwent gastrectomy alone, 36 underwent chemotherapy alone, and 6 received supportive care. The median patient survival was 13 months. Patients who underwent gastrectomy had significantly longer survival than those who did not undergo gastrectomy (14 vs. 8 months, P<0.001). Patients who received chemotherapy showed significantly longer survival than those who did not (13 vs. 7 months, P=0.032). Patients who underwent gastrectomy plus chemotherapy showed better survival than those who underwent other treatments. In multivariate analysis, gastrectomy was found to be an independent prognostic factor (hazard ratio, 0.52; 95% confidence interval, 0.33-0.82) in addition to chemotherapy. Conclusions: Our study showed that patients who underwent gastrectomy plus chemotherapy had the best survival. Although the survival benefit of gastrectomy remains uncertain, it is a favorable prognostic indicator in patients with stand-alone peritoneal metastasis.

• 한국화재소방학회논문지
• /
• 제26권1호
• /
• pp.74-79
• /
• 2012

본 논문은 2011년 개정된 "감지기 형식승인 및 검정기술기준"에 적합한 단독경보형 감지기 개발에 관한 연구이다. 변경된 내용의 가장 큰 특징은 전원이다. 10년 이상 사용 가능한 단독경보형 감지기를 개발하기 위해 나노전력기술이 사용된 저전력 마이크로컨트롤러를 사용하였다. 마이크로컨트롤러의 슬립모드를 활용하고, 저전력의 전원감시부, 열감지부 및 연기감지부를 제작하여 저전력 단독경보형 감지기를 개발하였다. 특히, 비화재보를 줄이기 위해 단독경보형 감지기는 열연 복합식으로 개발되었다. 사용자는 딥스위치를 이용하여 열감지모드 또는 열 연기감지모드로 동작형태를 선택할 수 있다. 마이크로컨트롤러가 지원하는 RS-485 통신기능을 활용하여 유선으로 단독경보형 감지기 간에 통신이 가능하도록 하였다. 이로써 화재발생시 보다 넓은 지역까지 경보를 알릴 수 있고 비화재보를 줄인 열연 복합식 단독경보형 감지기를 개발하였다.