• 제어로봇시스템학회논문지
• /
• 제10권2호
• /
• pp.171-177
• /
• 2004

Many instrumentations have been used to acquire the performance data of military systems fer many years. But they could not satisfy environmental specifications(vibration, shock, temperature) and processing speed to apply for the performance test of military systems because of having developed as common vehicles/fixed installation equipments. Thus a new rugged embedded measurement system is required to process large data in high processing speed(Maximum sample rate:1.25Mhz/ch) with rugged environmental specifications. We have developed embedded measurement systems by using PXI(PCI extension for Instrumentation)bus interface composed of a stand alone controller and versatile data acquisition boards(analog, digital, vision, temperature and small signal conditioner) on PC-based environment to solve these problems. Operation programs have been developed using Lab_View and the performances have been validated experimentally.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권6호
• /
• pp.291-297
• /
• 2003

This paper presents a current-source-inverter based on a buck-boost configuration and its application for residential photovoltaic system. The proposed circuit has five switches. Among them, only one switch acts as chopping, and the other determine the polarity of output; therefore, it can reduce the switching loss. Because the input inductor current is operated on the discontinuous conduction mode, high power factor can be achieved without additional input current controller. So the overall system shows a simple structure. The operational modes are analysed in depth, and then it was verified through the experimental results using a 150 [W] prototype equipped with digital signal processor TMS320F241.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.291-295
• /
• 2009

Economic and environmental concerns over fossil fuels encourage the development of photovoltaic(PV) energy systems. Due to the intermittent nature of solar energy. energy storage is needed in a stand-alone PV system for the purpose of ensuring continuous power flow. Grid-connected PV system that supply power in a critical load demand require to curb power fluctuation. In this case. SCB is a effectiveness in controlling power variation due to intrinsic PV system. We propose the Matlab/Simulink dynamic model and power flow characteristics of a hybrid energy system with PV and SCB.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.665-669
• /
• 2000

Recently the problem of energy branch become worse increasingly. Therefore many researches about new energy source are processing in several places around are processing in several places around the world. Especially solar energy has many advantages like as purity and infinity. Photovoltaic(PV) system can be classified into two types : One is stand alone type and the other is utility interactive one. Utility interactive type PV system need some technology that Maximum peak power tracking(MPPT) and Anti-islanding and Active Power filter(APF). For APF operation dc-link voltage should be high to supply sufficient output current which needed for harmonic current compensation so usually DC-DC converter is used for boost. In this paper DC-DC converter for PV system and controller for dc-link voltage control are analyzed and designed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 추계학술대회 논문집
• /
• pp.133-134
• /
• 2012

태양광 발전 시스템은 계통 전원을 공급받지 못하는 도서 지역이나 산간 지역 등에서 배터리 등의 에너지 저장장치를 연계하여 독립적으로 부하에 전력을 공급할 수 있다. 둘 이상의 태양광 패널을 이용해 독립 운전시에 에너지 발전률을 높이기 위해서는 전력 조절기 출력단의 DC 링크의 전압을 일정하게 유지시켜줄 태양광 패널과 MPPT 동작을 수행하는 패널 간의 상호 간섭에 대해서 고려하여야 한다. 본 논문에서는 두 개 이상의 태양광 모듈을 이용한 독립운전 시스템에서 안정된 DC-링크 전압동작을 보장하는 태양광 패널 및 전력 조절기의 설계 및 해석을 위해 태양전지 제어를 위한 태양전지 특성과 전력조절기의 제어 특성에 대해 알아보고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권7호
• /
• pp.1068-1074
• /
• 2009

This paper describes a study for the buoy which should be operated by a stand-alone power system. The field of this study is related to a power system operated by two batteries which depends on the load power. The fluctuation of the voltages makes the life cycle of the battery shorten. The control algorithm has been proposed for reducing the voltage pulsation of the battery by operation strategy according to using purpose such as main or sub power supply system. The power system with battery is separated two parts and this has been proved through a simulation and a sea experiment. In order for the experiment to use a wireless monitoring system has been installed in buoy. This paper shows an excellent test result of wireless monitoring system for buoy.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.821-825
• /
• 2008

Requirements of wireless sensor are increasing in machine condition monitoring. But, the limitation of battery power, self-power wireless sensor is necessary for the purpose of stand-alone operation. To overcome this problem, energy harvester is developed by the vibration energy. The purpose of this study is to develop a high efficiency energy harvester with high precision tuning.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.295-298
• /
• 2006

계통연계운전과 독립운전이 모두 가능한 계통연계형 인버터는 주전원계통의 고장 및 점검 시 독립운전모드로 동작하여 비상부하등의 전용부하에 안정된 전압을 공급해주어야 한다. 본 논문은 계통연계형 인버터의 독립운전 제어알고리즘에 관한 것으로 비선형 부하를 고려한 제어알고리즘을 제안하고, 시뮬레이션을 통하여 제안한 방법의 타당성을 검증한다.

• 유공압시스템학회논문집
• /
• 제4권2호
• /
• pp.7-20
• /
• 2007

TCU is a shift controller far automatic transmission of which major functions are to determine the shift point and manage the shifting process based on the various input signals. As the recent digital control technologies advance, it plays a key-role to improve a transmission performance and its algorithm becomes more complicated. This paper describes the development of transmission simulator fur wheel loader that enables a TCU for normal stand-alone operation by the real-time emulation of TCU interface signals. It can be utilized for the analysis of shift control algorithm implemented in a commercial TCU as well as for the development of brand new TCU.

• 한국항공운항학회지
• /
• 제7권1호
• /
• pp.7-18
• /
• 1999

The FAA, along with the ICAO and other members of the civil aviation community, has recognized that a GNSS will provide the primary stand-alone navigation system in the 21st Century. FAA has initiated plans to transition from its present ground-based navigation and landing system to satellite-based using signals generated by the GPS. In spite of some risks, GPS users are increasing rapidly. About 52 aircraft equipped with various GPS in their system and wide spread of GPS may be expected in Korea. However, the regulations concerning with CPS implementation were not established by the government. Another problem is GPS receiver's interface. The user interface, operating method and capability vary with GPS class and model. As a direct operator for the system, pilots have to ensure these limitations and rules for efficient adaptation and safety. The issues identified by the study are highly interrelated, and are evidence of aviation system problem. To treat one issue in isolation may improve certain aspects of the aviation system, but will ultimately fail to fundamentally increase the safety and efficiency for the system.