• 한국직업건강간호학회지
• /
• 제7권2호
• /
• pp.130-135
• /
• 1998

To investigate the working characteristics of the workers by place of duty, a study was carried out among 591 male workers aged 20-55 employed in an automobile industry in Korea. Workers participated to this study were divided into low back pain(LBP) and control group, according to the self-reports by written questionnaires. Work factors and complaint rates of low back pain were compared to the work places. The results were as follows ; 1) The complaint rates of low back pain were 49.2%(292 men) as a whole, 58.6%(34 men) in Production Control Department I, 50.2%(120 men) in Stamping Tool Department, 46.9%(138 men) in Bus Department. 2) Lifting and earring work of individual workers were directly associated with low back pain. Frequency of lifting and carring work is higher in the Final Body Section(Production Dept. I) and Body I Section(Bus Dept.). 3) LBP group were more frequently involved in working in awkward position(Quality Control Section of Stamping Tool Dept.), bending(Body I Section of Bus Dept.) and twisting posture(Sash Section and Body I Section of Bus Dept.). 4 )Workers exposed to vibration during working shows the higher complaint rate of low back pain.

• 한국CDE학회논문집
• /
• 제6권4호
• /
• pp.263-270
• /
• 2001

In stamping-die manufacturing, the first step is to build die patterns for lost wax casting process. A recent industry trend is to manufacture the die pattern using 3-axis NC machining. This study identifies technical considerations of the pattern machining caused by the characteristics of Styrofoam material, and proposes technical methods related to establishing a process plan and generating tool paths for optimizing the pattern machining. In this paper, the process plan includes the fellowing three items: 1) deter-mining a global machining sequence-a sequence of profile, top, bottom machining and two set-ups, 2) extracting machining features from a pattern model and merging them, and 3) determining a machining sequence of machining features. To each machining feature, this study determines the machining start point, generates the approach tool path, and proposes a tool path linking method fur reducing the distance of the cutter rapid motion. Finally, a smooth tool path generation and an automatic feedrate adjustment (AFA) method are introduced far raising the machining efficiency.

• 대한기계학회논문집A
• /
• 제32권10호
• /
• pp.890-896
• /
• 2008

Sheet metal forming is one of the most useful and important method in manufacturing of the autobody panels because of the excellent production rate. The objectives of sheet metal forming processes are getting a desired geometrical shape of products with good quality, low cost and reasonable lead time. In this paper, we examined the validity of finite element method analysis on the automobile FRT-PLR-L/R stamping process by using the lancing engineering method. Lancing is a press operation in which a single-line cut or slit is made on part way across the strip stock, without removing any metal. As a result, it has shown that the proper lancing engineering method could prevent fracturing by improving sheet metal flow.

• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.11-17
• /
• 1999

The objective of this paper is to introduce very fast but still stable solution using finite element procedures, and it has been used in an iterative mode for product design applications. A lot of numerical techniques have been developed to deal with the material, geometric and boundary condition non-linearities occurred in the stamping process. One of them, the One-Step FEM is very efficient and useful tool for a design and trouble-shooting in various stamping processes. In this method, the mathod, the material is assumed to deform directly from the initial flat blank to the final configuration without any intermediate steps. The formulation is based on the deformation theory of plasticity and the upper bound theorem. As a result of the calculations, the initial blank shape is obtained, together with the material flow, strains and thickness distribution in the part.

• 소성∙가공
• /
• 제7권6호
• /
• pp.519-529
• /
• 1998

In automotive industries the stamping of laser-welded blank gives many merits which bring about dimensional accuracy, strong body assembly and high productivity. However the welding of blanks with different thickness or/and different strength materials introduces many challenging formability problems for process development and tool design. in this paper the deformation characteristics for deep drawing process of laser-welded blank with different thickness sheets are investigated by experiment as well as by FEM simulation. The blank holding force ratio to avoid the movement of weld line was suggested and compared with the experimental result for cylindrical and rectangular cup drawing process. The optimal location of weld line in laser-welded blank with different thickness sheets is calculated to compensate for the movement of weld line on deep drawing process. In addition the effect of location of weld line on formability is clarified using FEM simulation.

• 소성∙가공
• /
• 제29권2호
• /
• pp.113-117
• /
• 2020

Various parameters are involved in the frictional behavior of steel sheet during stamping. We performed various tests in order to investigate the influence of tool surface texture directionality upon the resulting friction in sheet forming processes. Four different tools were manufactured which gave us a range of roughness for both parallel and transverse texture directions. Each of the tools was examined in flat type friction tests under identical test conditions. The tool with the transverse surface texture produces significantly lower levels of friction than the tool with parallel texture direction. Considering the lubrication mechanism associated with transverse texture, one can imagine the lubricant being constantly supplied from the reservoir of the micro valley to the point of contact and hence producing the lower levels of friction seen.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.353-356
• /
• 2008

Tool design is carried out for a press forming of a cross member in the rear suspension assembly based on the result of the finite element analysis. The analysis simulates the two-stage stamping process with the initial design and it fully reveals the unfavorable mechanism which develops inferiorities during forming. In this paper, a new design guideline is proposed to modify the process and tool shapes for a single-stage forming process. With the improved tool design, this study fabricates prototypes that satisfy the durability requirement.

• 소성∙가공
• /
• 제17권4호
• /
• pp.263-271
• /
• 2008

Process design is carried out for a press forming of a CTBA in the rear suspension assembly based on the result of the finite element analysis. The analysis simulates the two-stage stamping process with the initial design and it fully reveals the unfavorable mechanism which develops inferiorities during forming. In this paper, a new design guideline is proposed to modify the process and tool shapes for a single-stage forming process. With the improved tool design, prototypes are fabricated after several try-out processes. Results of the durability tests show that the design requirement of the part is satisfied and the effective weight reduction is achieved.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1183-1192
• /
• 1993

본 연구에서는 다음과 같은 두가지 관점에서 공구경로 최적화를 위한 기존 방 법의 문제점을 검토하고 이의 개선 방안을 제시하였다. 첫째, 기존의 공구경로 산출 방법에서는 고려되지 않는 공구대의 공구 장착 현황(turret configuration)이 최적화 과정에서 고려되어야 한다. 둘째로, 제작과 관련한 구속조건(manufacturing con- straints)이 최적화 과정에 직접 반영되어야 한다.

• 소성∙가공
• /
• 제10권3호
• /
• pp.193-199
• /
• 2001

Forming more than two parts of sheet metal in a single stamping operation lowers production costs, reduces weight, and heightens dimensional accuracy. The tailored blank (TB) is a laser-welded or mash-seam-welded sheet metal with different thicknesses, different strengths, or different coatings. Recently, automotive manufacturers have been interested in tailored blanks because of their desire to improve the rigidity, weight reduction, crash durability, and cost savings. Therefore the application to auto-bodies has increased. However, as tailored blanks do not behave like un-welded blanks in press forming operations, stamping engineers no longer rely on conventional forming techniques. Field try-outs are very important manufacturing processes for an economic die-making. In the field try-outs, the rounded geometries of tool and the drawbead shape and size in die face are generally modified when the forming defects can not be removed by the adjustment of forming process parameters. In this study, the field try-outs of tailored door inner panel are introduced and evaluated. The behaviours of laser tailored blank associated with different thickness combinations in the forming process of door inner panel are described focusing on terms of experimental investigations on the formability.