• 한국산학기술학회논문지
• /
• 제4권1호
• /
• pp.1-6
• /
• 2003

제품의 소재를 미리 테입 형태로 만들어 단면치 경계면을 따라 레이저로 절단하여 적층하는 방식의 임의형상시스템은 제품의 표면에 계단 모양의 무의가 생기므로 정밀한 제품을 제작하는데 어려움이 있었다 이를 극복하기 위하여 단면의 경계선을 절단할 때 수직으로 절단하는 것이 아니라 경사면을 따라 절단하여 전체적인 제품의 옆면이 부드럽게 연결되는 경사절단형 임의형상가공시스템을 개발하였다 이를 위하여 레이저 5축 경사절단기를 개발하였는데, x축과 y축은 상용화되어있는 x-y table을 이용하였고 z축은 한 개의 z축 이송대를 이용하였다 롤과 피치를 위하여는 서보모터 두 개를 이용하여 작업대가 회전할 수 있도록 하였다. 이와 같은 레이저 5축 경사절단기를 개발함으로써 시편의 어느 위치에서든 어느 각도로도 절단이 가능하게 할 수 있었다. 또한 3차원 CAD 데이터로부터 단면정보를 생성하고 경사절단면에 맞추어 레이저 궤적을 생성 할 수 있는 소프트웨어를 개발하였다

• 교육시설
• /
• 제16권1호
• /
• pp.59-68
• /
• 2009

In the knowledge-base 21st century, schools are required functions as a place of education for student as well as a place of life-long education for community. Therefore schools are needed to be open and to be multiple. The purpose of this study is to analysis of open-facilities to community of twenty elementary schools in Busan and to suggest a design guideline for open -facilities of school plan at the base of this analysis. The main contents of this study are as follows: 1) Study for general ideals and necessity of opening school facilities to community. 2) Establish the study objects of the opening facilities by existing studies and a questionnaire. 3) Focused on twenty elementary schools in Busan, analysis of the characteristics of opening facilities in terms of the using efficiency, that is, the approachability, the recognition and the territoriality. 4) At the base of 1) 2) 3), results are as follows: $\circ$ In consideration of approachability, the block plan of the open-facilities should be designed at making a circulation system without interruption of the student's educational area. $\circ$ In consideration of recognition, the form and detail of external and internal of the open-facilities should be designed at making distinction with the student's educational area. $\circ$ In consideration of territoriality, the zone of the open-facilities should be designed at composing exclusive hall, staircase and sanitation.

• 한국운동역학회지
• /
• 제13권1호
• /
• pp.121-137
• /
• 2003

The purpose of this study was to investigate the effect of the stair heights on lower extremity joint moment in stair-ascent activity Data were collected by 3-D cinematography, force platform. six normal males were participated in this experiment. All subjects performed a stair-ascent in four different heights of stairs (10, 14, 18, 22cm) having a 5 step staircase. The moment of lower extremity joint was analyzed during stance phase. The results were as follows: First, the second increase of plantar flexion moment of ankle joint in the 'forward continuance' phase was not occurred for stair A and B. But it occurred for stair C and D. And the maximum plantar flexion moment increased as the stair height become higher. Second, it was shown that the maximum inversion moment of the ankle joint was the smallest at stair B and it increased significantly at stair C. Third, maximum extension moment appeared in the 'pull-up' phase. And it increased as the stair height become higher. Fourth, it was shown that the maximum abduction moment of the knee joint was the smallest at stair C and it increased significantly at stair C. Fifth, maximum extension moment of hip joint increased significantly at stair C. Sixth, remarkable value of adduction moment occurred at hip joints and maximum adduction moment increased at stair D.

• 국제초고층학회논문집
• /
• 제7권4호
• /
• pp.397-408
• /
• 2018

In a recent tragic fire incident, the Plasco Tower collapsed after an intense outburst of fire lasting for three and a half hours and claiming the lives of 16 firefighters and 6 civilians. This paper will present continuing collaborative work between Hong Kong Polytechnic University and Queen's University in Canada to model the progressive collapse of the tower. The fire started at the 10th floor and was observed to have travelled along the floor horizontally and through the staircase and windows vertically. Plasco Tower was steel structure and all the steel sections were fabricated by welding standard European channel or angle profiles and no fire protection was applied. Four internal columns carried the loads transferred by the primary beams, and box columns were constructed along the perimeter of the building as a braced tube for resisting seismic loading. OpenSees fibre-based sections and displacement-based beam-column elements are used to model the frames, while shell elements are used for the reinforced concrete floor slabs. The thermal properties and elevated temperature mechanical properties are as recommended in the Eurocodes. The results in this preliminarily analysis are based on rough estimations of the structure's configuration. The ongoing work looks at modeling the Plasco Tower based on the most accurate findings from reviewing many photographs and collected data.

• 대한건축학회논문집:계획계
• /
• 제35권11호
• /
• pp.43-52
• /
• 2019

The purpose of this study is to suggest the use of modular construction method in order to promote the dissemination of the Health Life Support Center of the government, and to suggest the modular unitification and modularization plan for the necessary space data in the initial stage. By analyzing the floor plans of the 50 case projects currently in operation, the 28 required spaces and their spatial proximities are determined. Base on spatial proximities, each space is unitificated into a modular unit and modularized into a modular modules were integrated to modular proposals. As a result of this study, 13 unitificated modular unit floor planes and 3 modularized module floor planes including the staircase unit were proposed. However, future study have needed to study how to apply them to different actual sites and how to reduce cost.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.51-52
• /
• 2022

In previous studies, fire simulation was used to estimate the fire spread path. According to previous studies, the fire spread path was estimated to be the main staircase, but consideration of interior materials and internal bulkheads was insufficient. In this study, the ignition time of the 3rd layer was analyzed using the prediction formula considering the interior materials and internal bulkheads. As a result of referring to the architectural drawings, it was found that the interior material of the 3rd floor was made of polystyrene. The internal ignition time of the third floor using FDTs was calculated to be 14,070 seconds (about 234 minutes). The internal ignition time of the 3rd floor using the Handbook on Design Calculation Methods of Fire Behavior was calculated to be 3,104 seconds (about 51 minutes). As a result of calculating the ignition time through the predictive formula, there is a large difference in the ignition time, so it is necessary to review the condition of the variable as a result of the calculation in the future.

• 한국조명전기설비학회지:조명전기설비
• /
• 제7권3호
• /
• pp.27-33
• /
• 1993

본 논문은 캐리어 주파수 20kHz 이상의 고주파 전압형 PWM 인버터를 구동하기 위한 디지털 제어기에 관한 연구이다.적절한 PWM 패턴을 선택하기 위하여 기존의 PWM을 분석하였고, 비동기형 계단 정현파를 기준신호로 하여 제어기의 PWM 패턴을 구하였으며, PWM 제어방법은 가변 캐리어 비를 이용하였다.PWM 제어기는 모두 디지털 방식으로 구성하였다. 특히, 제시된 제어기의 구성은 연산 및 데이터 처리와 PWM 패턴 합성을 8비트 원칩 마이크로프로세서와 디지털 로직으로 나누어 설계하므로써 제어에 대한 속응성 및 제어성을 개선하였다. 또 변조도 데이터를 9비트로 출력하도록 프로그램을 적절히 이용하여 데이터 처리능력을 높였다.디지털 제어기는 회로구성을 i8051과 원칩 EPLD로 구성하였고, 설계된 제어기는 전압형 인버터를 동작시켜 제어성을 고찰하였다. 그리고 전압형 인버터 시스템의 고조파와 전류파형을 평가 분석하였다.

• KIEAE Journal
• /
• 제11권5호
• /
• pp.107-117
• /
• 2011

This paper aims to analyze architectural planning factors that could contribute to reductions in electricity consumption in the household of apartments, to apply energy saving methods at the design phase. These six architectural planning factors were orientation, building type (flat, tower block), standard floor access type (corridor access type, stair case type, EV hall access type), household location (floor), household opening type (one side opening, right angle opening, two sides opening or three sides opening), and bay on the facade (one bay, two bays, three bays, four bays), and these were derived from literature review. Household electricity consumption data were gathered from 2168 households with a total area of 135~150$m^2$ of 6 apartment complexes over 1000 households in Seoul. The annual characteristics of electricity consumption according to architectural planning factors were analyzed. And, variances between groups with respect to the mean of summer, winter, and annual electricity consumption according to each architectural planning factors were analyzed using ANOVA and t-test. The results showed that an annual electric energy saving of over 1000kWh was facilitated by these planning factors. In addition, high energy efficiency architectural planning factors based on the analysis were as follows: southwest orientation, flat type, corridor access type and staircase type, household loation below the 20th floor, two sides opening and three sides opening, and 2 bays and 3 bays.

• 한국실내디자인학회논문집
• /
• 제27권2호
• /
• pp.118-127
• /
• 2018

To complete the appropriate pattern language as a planning tool for suburban houses in Korea, this study reviews the characteristics in applying the pattern language to suburban houses in Korea by creating the pattern application examination chart regarding 110 patterns in architecture and evaluating and analyzing 24 examples in terms of the applicability of the patterns, the results of which are as set forth below. Firstly, when grouping the upper 31 patterns by similar characteristics, it was distinguished by the characteristics relating to (i) securing of lighting and viewing; (ii) placing of buildings and space and adjustment of inside and outside privacy through such placing; (iii) placing of proper motion line and functions of adjacent space according to such motion line; and (iv) determining of important space such as personal room, area for couple or children, staircase, entrance, hallway, etc. Secondly, when analyzing the reasons that the lower 41 patterns have not been applied, it was characterized by (i) the work space not suitable for suburban houses or the patterns suitable for commercial space; (ii) the patterns not suitable in Korea due to cultural differences; and (iii) the patterns whose applicability cannot be confirmed due to the limitation of examples and materials used in this study. Thirdly, the analysis of each pattern group (A through M) revealed that the pattern groups D and G are rarely related to suburban houses and J and M are patterns whose applicability cannot be determined in this study. Another characteristics is that the pattern groups B, E, F, I and L which obtain high scores in applicability are importantly reflected in planning for suburban houses in Korea. Fourthly, this study renders the average score of applicability, and the applicability rate, of the examples and confirms the number of the patterns applied in confirmity, patterns partially or potentially applied and patterns not applied at all.

• 한국방사선학회논문지
• /
• 제9권4호
• /
• pp.219-225
• /
• 2015

본 연구의 목적은 CR과 DR에서 가열장치를 구비한 부착형 탄소발열체 X선 촬영대의 사용에 따른 SNR과 CNR을 측정하여 부착 전과 부착 후의 화질을 평가하고자 한다. 알루미늄 계단 실험에서 CR은 부착 후에 SNR과 CNR이 증가하였지만 DR에서는 SNR과 CNR이 감소하였다. 인체모형팬텀 실험에서는 CR의 경우에 저에너지 저선량과 고에너지 고선량에서만 SNR과 CNR이 증가하였지만 다른 모든 조건에서는 SNR과 CNR이 감소하였다. 결론적으로 환자에게 온화한 느낌과 안전감을 제공하고 심적인 불안감을 해소하여 검사에 도움을 줄 수 있지만 임상적용에 있어서는 탄소발열체를 포함한 바닥필름과 보호필름의 두께와 재질을 고려하지 않으면 화질에 영향이 주기 때문에 향후 지속적인 연구가 필요하다고 사료된다.