• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.178-183
• /
• 2004

For developing fatigue design curve of cast stainless steels that would be used in piping material of domestic nuclear power plants, a low-cycle fatigue test rig was built. It is capable of performing tests in pressurized high temperature water environment of PWR. Cylindrical specimens of CF8M were used for the strain-controlled environmental fatigue tests. Fatigue life was measured in terms of the number of cycles with the variation of strain amplitude at 0.04%/s strain rates. The disparity between target length and measured length of specimens was corrected by using finite element method. The corrected test results showed similar fatigue life trend with another previous results.

• 대한기계학회논문집
• /
• 제13권6호
• /
• pp.1193-1202
• /
• 1989

본 논문에서는 발전소의 소재로 많이 쓰이고 있는 304 스테인리스강(앞으로는 304SS로 표기함)과 316스테인리스강(앞으로는 316SS로 표기함)의 크립 균열 발생 거동 을 각각 600.deg. C와 625.deg. C에서 조사한다. 이 온도는 발전소의 반응기(reactor)에 사용 되는 304SS와 316SS이 받는 온도이다. 즉 304SS와 316SS의 크립 균열 발생을 지배 하는 파괴 매개변수가 무엇인지가 크립 파괴 실험을 통하여 조사된다. 실험 결과는 이미 제안되어 있는 크립 균열 발생 모델에서 예측된 결과와 비교된다. 특히 304SS 와 316SS은 고온에서의 연성도가 변형률 속도에 따라 변하는 것으로 알려져 있다. 본 연구에서는 '변형률 속도에 따른 재료의 연성도의 변화에 근거한 균열 발생 모델' 을 제안하고, 그 모델에서 예측된 크립 발생 거동을 실험 결과와 비교한다.

• 열처리공학회지
• /
• 제23권2호
• /
• pp.90-95
• /
• 2010

The effects of grain size on the corrosion resistance of 429EM ferritic stainless steels for automobile exhaust system were investigated. Using specimens held at maximum service temperature of $950^{\circ}C$ for 10~70 hours, electrochemical polarization tests were conducted. While corrosion current density, $I_{corr}$, was influenced little by grain size, pitting potential, $E_p$, was increased with an increase of grain size. Sensitizaton at grain boundary occurred when the specimen were held at $950^{\circ}C$ for above 50 hours because of the dissolution of precipitates and grain coarsening.

• 한국정밀공학회지
• /
• 제7권4호
• /
• pp.140-148
• /
• 1990

A mathemetical medel has been developed for the purpose of estimating the rolling force required for computer control of cold strip mills. The model consists of equations of rolling force. flow stress. friction coefficient and tension. By applying the model to a 6-High cold tandem mill, the computer simulation is then been possible for all kinds of steels except stainless steel and the effectiveness of the model has been confirmed in the practice.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.103-108
• /
• 2001

Wear test has been performed to evaluate the wear mechanism of Inconel alloys against ferritic stainless steels in room temperature water. By means of scanning electron microscopy (SEM), the worn surface and microstructure of subsurface layer have been examined. The wear at steady state conditions result in the formation of 5∼7${\mu}$m thick layers with fragmented microstructure. The thickness of these layers seems to depend on the ability of work hardening and deformation accommodation at the contact areas during wear. Therefore, in room temperature water, the wear rate is closely related with the wear resistance of these fragment microstructure which are generated after severe subsurface deformation.

• 열처리공학회지
• /
• 제14권6호
• /
• pp.371-377
• /
• 2001

스테인리스강의 주요 특징은 우수한 내식성에 있다. 그럼에도 불구하고 스테인리스강은 질화시키면 스테인리스강의 주요 특징인 내식성의 저하가 불가피하다. 그러나 경우에 따라서는 내식성이 다소 희생되더라도 내모성 향상을 목적으로 SUS 304소재를 이용한 피스톤링이나 SUS 420 J2소재를 사용하는 마이크로 샤프트 등과 같은 많은 제품에 대하여 질화처리를 실시하고 있다. 스테인리스 제품에 얼룩이 없는 질화처리를 실시하기 위해서는 앞에서 소개한 방법 이외에 표면활성화를 위한 분말처리법 등이 많이 사용되고 있으며, 그 예로 일본의 마테크(주)에서 제조하여 (주)사마루에서 시판하고 있는 활성분체질화제(APN법, DCA)을 사용하여 질화시키는 방법등도 있다. 이와 같이 외국에서는 프라즈마법이 아닌 일반 가스질화에 의한 스테인리스강의 질화에 대한 많은 연구가 이루어지고 산업화 되어 있지만 현재 국내에서는 이에 대한 연구가 거의 이루어지고 있지 않은 실정이다. 따라서 앞으로는 국내에서도 이러한 분야에 대한 보다 많은 관심과 연구 및 기술보고 등이 활성화되어야 할 것으로 생각된다.

• Transactions on Electrical and Electronic Materials
• /
• 제8권6호
• /
• pp.283-285
• /
• 2007

The molten carbonate fuel cell has conspicuous feature and high potential in being used as an energy converter of various fuel to electricity and heat. However, the molten carbonate fuel cell which use strongly corrosive molten carbonate at $650^{\circ}C$ have many problem. Systematic investigation on corrosion behavior of stainless steels has been done 62 mole% $Li_2CO_3$ and 38 mole% $K_2CO_3$ melt at 923 K by using steady-state polarization method and electrochemical impedance spectroscopy method. It was found that SUS 310L and Al coating specimen may be the best choice among the alloys tested in this study for molten carbonate fuel cell component material.

• 반도체디스플레이기술학회지
• /
• 제16권1호
• /
• pp.59-64
• /
• 2017

The general manufacturing problem can be described as the achievement of a predefined product quality with given equipment, cost and time constraints. Unfortunately, for some quality characteristics of a product such as surface roughness it is hard to ensure that these requirements will be met. Stainless steels STS 304 is frequently used as shaft materials in small fiber reinforced polymer(FRP) fishing boats. In this work, the dry turning parameters of STS 304 are optimized by using Taguchi method. The experiments were conducted at three different cutting speeds with three different feed and three different depth of cut. The cutting parameters are optimized using signal to noise ratio and the analysis of variance. The effects of cutting speed and feed on surface roughness was analyzed. The results revealed that the spindle speed is the more significant parameter influencing the surface roughness.

• 한국자기학회지
• /
• 제3권4호
• /
• pp.277-283
• /
• 1993

세개의 오스테 나이트계의 Fe-Cr-Ni 스테인레스 합금강들의 DC 자화율의 온도의존성을 4.2-300 K 온도영역에서 측정하였다. 측정결과 두개의 합금강들은 two-magnetic-phase 모델(spin glass와 초상자성)을 만족하였으며 나머지 하나는 자기적 2중 천이현상을 나타내었다. 또한 Ni/Cr의 비가 증가할수록 자화율의 최 대값이 증가하고 이 값을 나타내는 온도는 감소하였다.

• Journal of Welding and Joining
• /
• 제31권2호
• /
• pp.49-56
• /
• 2013

We have investigated traits of clad metals in hot-rolled clad steel plates, sensitization and mechanical properties of STS 316 steel plate and carbon steel(A516). Clad steel plates were butt-weld by SAW+SMAW, and with the time of heat treatment as the variable, heat treatment was conducted at $625^{\circ}C$, for 80, 160, 320, 640, 1280 minutes. As a way to evaluate it, sectioned weldments and external surfaces were investigated to reveal the degree of sensitization by mechanical property, etching and those of EPR test, results were compared with it. In short, the purpose of this study is suggesting some considerations in developing on-site techniques to evaluate the sensitization of stainless steels.