• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.202-217
• /
• 1996

The purpose of this study was to compare the degree of microleakage of Glass-Ionomer root canal sealer possessed several enviable properties with that of the other sealers and to evaluate clinical performance. One hundred twenty single-rooted teeth were used in this experiment. The teeth were cleaned mechanically and immersed for 24 hours in 5.25% sodium hypochlorite and clinical crowns then were removed. After the root canals were instrumented using a step-back technique. one hundred twenty single-rooted teeth were divided into five groups of 24 in each. Group 1 : Tubli-Seal(Kerr Co., MI, U.S.A/ZOE-based), lateral condensation Group 2 : Sealapex(Kerr/Sybron, Romulus, MI/ $Ca(OH)_2$-based), lateral condensation Group 3 : AH 26(De Trey Co., Zurich Switzerland/Resin-based), lateral condensation Group 4 : Ketac-Endo(ESPE GMBH & CO. KG Seefeld:oberbay. Germany/ Glass Ionomer Cement-based), lateral condensation Control group : no sealer. lateral condensation And then. the root canals were obturated by lateral condensation technique with gutta-percha and experimental sealers. The control group were obturated without sealer. The teeth were placed in a vacuum chamber for 15 minutes and immersed 2% methylene blue under vacuum for 15 minutes. The teeth were passively stained for 1 week and 2 weeks and were cleared and evaluated for linear dye leakage using Tool maker's microscope(${\times}200$). The results were as follows: 1. There were statistically significant differences in the degree of dye penetration between the control group and experimental groups(p<0.05). 2. In the experimental groups, Sealapex($1.2871{\pm}0.9180mm$) exhibited the lowest mean value of dye penetration, followed by Ketac-Endo($1.4432{\pm}0.8082mm$), AH 26($1.5030{\pm}0.7752mm$) and Tubli-Seal($1.6458{\pm}1.0292mm$)(p>0.05). 3. There were statistically significant differences in the variation of microleakage between 1 week and 2weeks in Tubli-Seal and Seal apex groups (p<0.05). 4. The degree of dye penetration of all groups were increased as the time elapsed and AH 26 showed the lowest variation(+0.11) and Tubli-Seal(+ 1.03) showed the highest variation (p<0.001).

• Journal of dental hygiene science
• /
• v.13 no.2
• /
• pp.165-173
• /
• 2013

The purpose of this study was to evaluate the surface change after 15% carbamide peroxide home bleaching to various restorative materials (composite resin [CR], resin modified glass ionomer [RMGI] and glass ionomer [GI]) and to observe the effect of surface condition of the materials on re-staining. Three esthetic restorative materials (Filtek Z250, 3M, USA; Fuji II LC, GC, Japan; Fuji II, GC, Japan) were used in this study. Twenty specimens per material group were made and divided into two groups (bleached and control). The specimens were immersed in coffee after applying bleaching agent. The color change and surface roughness were measured before and after bleaching and after immersion in coffee. The data were analyzed with SPSS 18.0. The results were as follows: 1. The color of all experiment groups was significantly changed after bleaching (p<0.05). RMGI was the greatest value of ${\Delta}E^*$ and ${\Delta}L^*$. GI and CR groups were in ordering (p<0.05). The ${\Delta}a^*$ value was decreased GI, RMGI and CR. RMGI was only significantly decreased in ${\Delta}b^*$ value (p<0.05). 2. The surface roughness before and after bleaching was significantly different on CR, RMGI and GI (p<0.05). 3. After staining with coffee, the value of ${\Delta}E^*$ was increased in GI, RMGI and CR, furthermore GI and RMGI showed significant difference in the bleaching groups (p<0.05). The ${\Delta}L^*$ value of GI and RMGI was significantly decreased. 4. The change of surface roughness after staining was not significantly different in all groups (p>0.05). The maintenance of color stability in esthetic restorations is one of the most important properties. Tooth whitening is for the aesthetic. Therefore, dental professionals should notice to patients about re-staining after tooth whitening. They should give an instruction that how to prevent and which kinds of agents could be stained.

• Journal of Periodontal and Implant Science
• /
• v.30 no.3
• /
• pp.505-527
• /
• 2000

The 3 beagle dogs aged over one and half years and weighed 14 to 16 Kg were utilized in this study. Horizontal furcation defects were induced around 3rd, and 4th premolars bilaterally. BMP-4 in conjunction with EGF and BMP-4 only were applied in the right and left premolars respectively. 1 animal was sacrificed at 2nd week, 4th week, and 8th week, after regenerative surgery respectively. Semi-thin sections using glass-knife were stained with hematoxylin- eosin and trichrome for light microscopic study. The results were as follows : 1 . The long junctional epithelial downgrowth was observed in both area applied with BMP-4 and with BMP-4 and EGF at 2nd week after the surgery. 2 . The extensive regeneration of new bone and cementum was appeared at 4th week and the maturation of bone was observed at 8th week in both area applied with BMP-4 and with BMP-4 and EGF. 3 . The root ankylosis and resorption was presented along the exposed root surface at the coronal 1/3 of defect in the BMP-4 applied site, but it was not shown in the site applied with BMP-4 in conjunction with EGF at the 4th week. At 8th week, the root ankylosis was apparently appeared in the BMP-4 and EGF applied site as well as in the BMP-4 applied site. 4 . The periodontal ligament tissue including Sharpey's fiber inserted into cementum and alveolar bone, was formed along the exposed root surface in the area applied with BMP-4 only, but in the site applied with BMP-4 and EGF, the collagen fiber running parallel to the root surface without Sharpey's fiber, was observed in the periodontal ligament space at 4th and 8th week. Within the above results, BMP-4 had the remarkable capability to regenerate the periodontal tissue and EGF had possibility to prevent from the root ankylosis. Therefore, growth factors including BMP-4 and EGF may have the strong possibility to be utilized in the clinical periodontal treatments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.518-531
• /
• 2016

This study aimed to find the architectural meaning and characteristics of L'Art Sacr? Movement advocated by Dominican Father Marie Alain Couturie. From 1936 till 1954 Father Couturier was the chief editor of the review L'Art Sacr? that became very influential among art critics no longer satisfied with what was considered outdated 19th century church interior decoration. Marie Alain Couturie was a French Dominican friar and Catholic priest who gained fame as a designer of stained glass windows. He was noted for his modern inspiration in the field of Sacred Art. Couturier's greatest ambition was to revive Christian art by appealing to the independent masters of his time. From these viewpoint, we investigated the background and process of the movement and analyzed the architectural meaning and characteristics which represented the Art Sacr? movement. The analyzed chapel buildings were as follows: 1) The Church of Notre-Dame de Toute Gr?ce du Plateau d'Assy, bringing together Braque, Matisse, Rouault, L?ger and Chagall, 2) The Chapel of Saint-Marie Rosaire by Henri Matisse, 3) The Chapel of Notre Dame du Haut and The Couvent de La Tourette by Le Corbusier, and 4) The Rothko Chapel by Mark Rothko and Philip Johnson. These L'Art Sacr? projects inscribedthemselveswithin what was the century's most serious attempt at the reintegration of Art and religious space. Courturier's interactions with artists and architects are traced and shown to have played a major role in the evolution of the priest's thinking and Church interior decoration. At the same time, Courturier's clear and vigorous L'Art Sacr? articles were both defining the theoretical basis of new vision and anticipating the renewal of the religious space.

• Clinical and Experimental Reproductive Medicine
• /
• v.29 no.2
• /
• pp.139-147
• /
• 2002

Objective : This study was to establish a reproducible differentiation system from the parthenogenetic mouse embryonic stem (P-mES02) cells into functional cardiomyocytes like as in vitro fertilization mouse embryonic stem (mES01) cells. Materials and Methods: To induce differentiation, P-mES02 cells were dissociated and aggregated in suspension culture environment for embryoid body (EB) formation. For differentiation into cardiomyocytes, day 4 EBs were treated with 0.75% dimethyl sulfoxide (DMSO) for another 4 days (4-/4+) and then were plated onto gelatin-coated dish. Cultured cells were observed daily using an inverted light microscope to determine the day of contraction onset and total duration of continuous contractile activity for each contracting focus. This frequency was compared with the results of DMSO not treated P-mES02 group (4-/4-) and mES01 groups (4-/4+ or 4-/4-). For confirm the generation of cardiomyocytes, beating cell masses were treated with trypsin-EDTA, dispersed cells were plated onto glass coverslips and incubated for 48 h. Attached cells were fixed using 4% paraformaldehyde and incubated with specific antibodies (Abs) to detect cardiomyocytes (anti-sarcomeric ? -actinin Ab, 1 : 100; anti-cardiac troponin I Ab, 1 : 2000) for 1 h. And the cells were finally treated with FITC or TRITC labelled 2nd Abs, respectively, then they were examined under fluorescence microscopy. Results: Rhythmically contracting areas in mES01 or P-mES02 cells were firstly appeared at 9 or 10 days after EBs plating, respectively. The highest cumulative frequency of beating EBs was not different in both treatment groups (mES01 and P-mES02, 4-/4+) with the results of 61.3 % at 13 days and 69.8% at 15 days, respectively. Also, the contracting duration of individual beating EBs was different from minimal 7 days to maximal 53 days. However, DMSO not treated groups (mES01 and P-mES02, 4-/4-) also had contracting characteristics although their frequency was a few compared to those of DMSO treated groups (6.0% and 4.0%). Cells recovered from the spontaneously contracting areas within EBs in both treated groups were stained positively with muscle specific anti-sarcomeric ? -actinin Ab and cardiac specific anti-cardiac troponin I Ab. Conclusion: This study demonstrated that the P-mES02 cell-derived cardiomyocytes displayed similarly structural properties to mES01 cell-derived cardiomyocytes and that the DMSO treatment enhanced the cardiomyocytes differentiation in vitro.

• Journal of Periodontal and Implant Science
• /
• v.26 no.1
• /
• pp.47-67
• /
• 1996

The purpose of this study was to observe the effect of $Biocoral^R$ graft and bioglass 45S5 graft in combination with ePTFE membrane in periodontal osseous defects for new bone formation. Nine healthy dogs were used. Under general anesthesia, 3-wall defects were created on the mesial and distal surfaces of the maxillary right canines, the mesials of the maxillary right second premolars, the distals of the mandibular right canines and the mesials of the mandibular right third premolars. To induce periodontitis, a silicone rubber, $Provil^R$ light body, was injected under pressure into the defects. Ninety days later, $Provil^R$was removed and followed by thorough root planing. The followings were then applied in the mesial and distal defects of the maxillary right canines, the mesials of the maxillary right second premolars, the distals of the mandibular right canines and the mesials of the mandibular right third premolars by random selections : 1) ePTFE membrane only application, 2) $Biocoral^R$ graft, 3) $Biocoral^R$ graft and ePTFE membrane application, 4)Bioglass 45S5 graft, 5) Bioglass 45S5 graft and ePTFE membrane application. The membranes were removed 1 month later. The dogs were sacrified at 1, 2 and 3 months following the graft, and block sections were made, demineralized, embedded, stained and examined by light microscope and transmission electron microscope. On the sections from teeth treated with ePTFE membrane only, the defect demonstrated extensive connnective tissue and alveolar bone regeneration. The $Biocoral^R$ graft group demonstrated extensive bone regeneration compared with ePTFE membrane only group. In the $Biocoral^R$ graft plus ePTFE membrane group, regeneration of new alveolus and crest occurred within the defect. As the experimental period lengthened, bone regeneration was increased and bone bridge was formed among the graft particles. The but bioglass 45S5 graft group demonstrated extensive bone regeneration but the amount of new bone was less than that of the $Biocoral^R$ graft group. For the bioglass 45S5 graft plus ePTFE membrane group, the amount of new bone was also increased. As the experimental period lengthened, bone regeneration was increased. Multinucleated giant cells, fibroblasts and macrophages were observed. As the bone formation was increased, the number of such cells was decreased. In conclusion, the $Biocoral^R$ was found better than the bioglass 45S5 for new bone formation, and the use of ePTFE membrane alone or with $Biocoral^R$/bioglass 45S5 can be supported as potential methods of promoting bone formation.

• Archives of design research
• /
• v.14 no.2
• /
• pp.163-174
• /
• 2001

William Morris(1834-1896) was the most versatile and talented of all British nineteenth century polymaths. Since his death over one hundred years ago his achievements as an artist, designer, manufacturer, shop-keeper, poet, author, publisher, printer, collector, teacher, conservationist, political activist and environmentalist have influenced the lives and work of people throughout the world. Moris is now best known for his attractive and colorful patterns. The decorating firm of Morris, Marshall, Fault & Company(Morris & Company after 1875) was established in 1861. Over the years it produced works, ranging from stained·glass windows and furniture to tapestries, carpets and printed and woven fabrics, that had great influence on the course of British design. His earliest experiments with the craft were amateurishly worked embroideries made for his own use. Before long, Morris began to produce textiles on a more commercial basis. In order to control production properly, Morris set about learning the various textiles techniques, first dyeing and blockprinting, hand-loom jacquard and eventually, carpet and tapestry weaving. This extraordinary involvement with the practical side of manufacture separated Morris from all other designers of his time and contributed in no small way to his success. Morris's designs for textiles, embroidery, dyeing, woven, carpet and tapestry were commercially produced, that are most universally admired and frequently copied today. These have a timeless quality arising from the designers respect for and knowledge of the technique. Of equal importance was his love of nature, evidence of which can be seen in even the smallest details of each of his patterns.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.4
• /
• pp.446-460
• /
• 2000

All-ceramic restorations have had a more limited life expectancy than metal ceramic crowns be-cause of their lower strength. The relatively lower strength has limited the use of all-ceramic crowns to the areas where occlusal loads are lower Therefore many researches have been done to increase the strength of all-ceramic crowns. IPS Empress 2 is a new type of lithium disilicate glass-ceramic with enhanced physical characteristics which has been in use clinically since 1998. Previous researches reported that the flexural strength of all-ceramic material was greater than 300 MPa, and all-ceramic crowns can be used in staining or layering technique. The objective of this study was to investigate the influence of the thickness of IPS Empress 2 ceramic on fracture strength. Both staining technique and layering technique was investigated. Vita VMK was used as control. For all three groups, five specimens each of 0.8mm, 1.0mm, 1.4mm, 1.8mm, and 2.2mm thick-ness (a total of 75 specimens) were prepared. Control group : Vita VMK Porcelain specimens were prepared with dentine ceramic and liquid glazing was done. Group I : IPS Empress 2 were prepared with staining technique and stained twice and glazed once. Group II : IPS Empress 2 were prepared with layering technique and glazed after wash firing. The thickness and diameter of the specimen were measured and controlled after specimen preparation. Biaxial Flexure Test (ASTM Standard F394-78) was adopted as this test method produces results least affected by the edge condition of the specimens. Fracture strength was measured with Instron Universal Testing Machine. Conclusions are as follow : 1. The fracture strength was increase in order of control group, test group I, test group II. 2. Fracture strength of the group I (Empress 2 Staining) was 65.54 N in 0.8mm, 155.2 N in 1.0mm, 233.5 N in 1.4mm, 434.5 N in 1.8mm, and 600.1 N in 2.2mm. 3. Fracture strength of the group II (Empress 2 Layering) was 190.0 N in 0.8mm, 283.5 N in 1.0mm. 437.2 N in 1.4mm, 732.0 N in 1.8mm, and 1115.0 N in 2.2mm. 4. No statistical difference was found in flexural strengths according to thickness in a specified group(p>0.05).

• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.120-129
• /
• 2009

The purpose of this study was to investigate the pulpal response to direct pulp capping with dentin sialoprotein (DSP) -derived synthetic peptide in teeth of dogs, and to compare its efficacy to capping substances $Ca(OH)_2$ and white mineral trioxide aggregate (WMTA). A total of 72 teeth of 6 healthy male beagle dogs were used. The mechanically exposed pulps were capped with one of the following: (1) DSP-derived synthetic peptide (PEP group): (2) $Ca(OH)_2$ (CH group): (3) a mixture paste of peptide and $Ca(OH)_2$ (PEP+CH group): or (4) white MTA (WMTA group). The access cavity was restored with a reinforced glass ionomer cement. Two dogs were sacrificed at each pre-determined intervals (2 weeks, 1 month, and 3 months). After the specimens were prepared for standard histological processing, sections were stained with hematoxylin and eosin. Under a light microscope, inflammatory response and hard tissue formation were evaluated in a blind manner by 2 observers. In the PEP group, only 3 of 17 specimens showed hard tissue formation, indication that the DSP-derived synthetic peptide did not induce proper healing of the pulp. Compared with the CH group, the PEP group demonstrated an increased inflammatory response and poor hard tissue formation. The CH and WMTA groups showed similar results for direct pulp capping in mechanically exposed teeth of dogs.