• Applied Microscopy
• /
• v.31 no.1
• /
• pp.1-8
• /
• 2001

The morphological features of neuronal dendritic spines are changed their shapes, sizes and density in response to physiological or pathological conditions . Therefore, exact analysis of spines warrants understanding of neuronal function. The size of the spine is at the borderline of resolution with light microscopy. High voltage electron microscopy Provide excellent resolution of the spines with proper stain techniques thanks to its higher resolution and penetration power. We evaluated more effective staining method for observing dendritic spines after labeling Purkinje cells with anti-calbindin 28 kD immunohistochemistry or Golgi staining methods. 4 fm thickness sections were observed with high voltage electron microscopy and some morphometric analyses were performed. Both Golgi staining and immunohistochemistry revealed the detail structures of the Purkinje cell such as soma, dendrites, and dendritic spines. High voltage electron micrographs with Golgi staining provide more precise morphology and are easy to measure. Average density of spine is $24.5{\pm}3.6/10{\mu}m$ and its length is $1.12{\pm}0.22{\mu}m$. For quantitative analysis of the spines, high voltage electron, micrographs with Golgi staining are more effective. This preliminary result is expected to be useful for further study of spine plasticity in various conditions.

• Journal of Korean Medicine Rehabilitation
• /
• v.21 no.2
• /
• pp.63-85
• /
• 2011

Objectives : This study was carried out to know the effects of Danggwisayeokgaohsuyusaenggang-tang(hereinafter referred to DST) on arthritis induced by collagen on DBA/1 OlaHsd mice. Methods : For this purpose, DST was orally administered to mouse with arthritis induced by collagen II. Cytotoxicity, high performance liquid chromatograph(HPLC) analysis, arthritis index, value of immunocyte in draining lymph node and paw joint, cytokine were measured in vivo. Results : 1. The cytotoxicity against human fibroblast cells(hFCs) was not measured in any concentration. 2. In HPLC analysis, There are high peak patterns at 8 minute(min), 12 min, 35 min, 45 min. 3. The arthritis index was decreased significantly. 4. The degree of arthritis induced damage of joint of DST group is slight compared with control group in histopathologic observation(Hematoxylin and eosin stain(H&E), Masson's trichrome(M-T) staining). 5. In total cell counts of draining lymph node(DLN) and paw joint, the cells in DLN decreased significantly on DST 200 mg/kg and the cells in paw joint decreased significantly on 200 mg/kg and 50 mg/kg. 6. In DLN, $CD4^+/CD25^+$, $CD3^+/CD69^+$, major histocompatibility complex(MHC), class-II/$CD11c^+$ cells decreased significantly on DST 200 mg/kg and 50 mg/kg $CD3^+/CD8^+$ cells decreased significantly on DST 200 200 mg/kg, $CD4^+$, $CD3^+/CD44^+$ cells decreased. 7. In paw joints, $CD4^+$, $CD11b^+/Gr-1^+$ cells decreased significantly on DST 200 mg/kg and 50 mg/kg. 8. In joints, levels of $IL-1{\beta}$, IL-6, $TNF-{\alpha}$, cyclo-oxygenase-2(COX-2), NOS-II were decreased on DST 200 mg/kg and DST 50 mg/kg. 9. In analysing of cytokine in CD3/CD28 activated spleen, IL-17 was decreased significantly, IL-4 was increased significantly $INF-{\gamma}$ was decreased on DST 200 mg/kg. 10. In analysing of cytokine in collagen activated spleen, IL-17 were decreased significantly, IL-4 was increased significantly. Conclusions : This results demonstrated that DST suppressed the inflammatory progression of collagen-induced arthritis(CIA) mice and supported further studies are required to survey continuously in looking for the effective substance and mechanism in the future.

• The Korea Journal of Herbology
• /
• v.23 no.1
• /
• pp.75-83
• /
• 2008

Objectives : The present study was carried out to investigate the effect of Hyperici Japonici Herba on the proliferation and activation of eosinophils which were prepared from lung cells of asthma-induced mice by ovalbumin(OVA) treatment. Methods : C57BL/6 mouse was exposed to OVA three times a week for 6 weeks. The mouse lung tissues were dissected out, chopped and dessiciated with collagenase(1${\mu}g$/ml). Eosinophils were activated by rIL-3/rmIL-5 co-treatments. The lung cells were treated with extract of Hyperici Japonici Herba(EHH), incubated for 48 hr at $37^{\circ}C$, and analyzed by flow cytometer. ELBA, RT-PCR, immunocytochemistry stain. Results : The cell number ratio of granulocyte, $CD3e^-$/$CCR3^+$, $CD3e^+$/$CD69^+$, $CD4^+$, $CD23^+$/$B220^+$ cells was increased in rmIL-5/rIL-3 treated control group compared to the normal group. Cells numbers in the experimental animal group treated with EHH was all decreased. In ELISA analysis, IL-4, IL-5, IL-13 protein levels and histamine release level were greatly increased in the control group compared to the normal animal group, then significantly decreased in the experimental group with 100 ${\mu}g$/ml of EHH treatment. In RT-PCR analysis, the HT value of IL-4, IL-5, IL-13, CCR3, Eotaxin were increased in the control group compared to the normal animal group, then decreased in the experimental group with 100 ${\mu}g$/ml of EHH treatment. And eosinophil proliferation levels were 18847${\pm}$1527(cpm) in the control group, 4676${\pm}$972(cpm) in the positive control group, and 8675${\pm}$159(cpm), 11352${\pm}$1005(cpm), 14325${\pm}$677(cpm) in the experimental group with 100 ${\mu}g$/ml, 10 ${\mu}g$/ml, 1 ${\mu}g$/ml of EHH treatment. Conclusions : The present data suggested that Hyperici Japonici Herba may have an effects on the inhibition of parameters associated with asthma responses in eosinpophils, and thus implicate the possibility for the clinical application of EHH.

• Computational Structural Engineering
• /
• v.2 no.1
• /
• pp.65-70
• /
• 1989

An analytical study was conducted using the Galerkin technique to determine behaviour of thin fibrereinforced and laminated composite pipes under soil pressure. Geometric nonlinearity and material linearity have been assumed. It is assumed that vertical and lateral soil pressure are proportional to the depth and lateral displacement of the pipe respectively. It is also assumed that radial shear stress is negligible because the ratio of thickness to the radius of pipe is very small. The above results are verified by the finite element analysis.

• Journal of Periodontal and Implant Science
• /
• v.38 no.1
• /
• pp.59-66
• /
• 2008

Purpose: It has been shown that the inorganic polyphosphate is effective for the regeneration of bones through the preliminary animal test of rabbits. The most effective concentration of the polyphosphate, however, is not known yet. Moreover, the effectiveness of carriers inside human body is not confirmed.. Materials and Methods: In this study, we examined the effect of the concentration of the inorganic polyphosphate on the process of the bone regeneration using the 6 weeks old rabbits with the weight of 2.0 kg in average. We performed the experiment using TR-ePTFE membrane(membrane) filled with collagen immersed in 4%, 8% of inorganic polyphosphate, respectively, following removal of the proper sized cortical bones from the rabbit calvaria. The experimental results were compared with the one of the following four groups: The negative control group for membrane only, the positive control group for membrane filled with collagen, the first experimental group for membrane filled with collagen immersed in 4% of inorganic polyphosphate, and the second experimental group for membrane filled with collagen immerse in 8% of inorganic polyphosphate. The fragments of the tissue with membrane obtained from each group of the sacrificed rabbits for 8 or 16 weeks sustained after surgery were then prestained by the Hematoxylin-Eosin stain and coated by resin to form non-decalcified specimens for the histologic examination and analysis. New bone formation was assessed by histomorphometric and statistical analysis. Results: 1. All groups have shown better bone regeneration at 16weeks than 8weeks. 2. Negative control group has shown more bone regeneration relative to the other groups at 8 and 16 weeks. 3. All experimental groups have shown better bone regeneration relative to positive control group. 4. At 16 weeks, the first experimental group has shown more bone regeneration compared to the second experimental group. Exophytic bone formation is not good at the first and the second experimental groups compared with negative control group. But, the use of 4% inorganic polyphosphate was more effective to bone formation than the use of 8% inorganic polyphosphate. Conclusion: With above results, it is suggested the use of inorganic polyphosphate with vehicle under TR-ePTFE membrane.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2007

Purpose: To evaluate the effect of compression on the distracted area in new bone formation during mandibular distraction osteogenesis in rabbits. Materials and method: Sixteen rabbits, weighing approximately 2 Kg, and the prefabricated distraction device were used. With the rabbits under general anesthesia, we performed vertical osteotomies between the anterior and posterior mandibular teeth and then placed the distraction device. After a 5 -day latency period, the mandible was distracted to a length of 10.0 mm at a rate of 1 mm/day and then immediately compressed 4 mm in the experimental group (n=8). In the control group (n=8), the mandible was distracted to a length of 6.0 mm at a rate of 1 mm/day. Rabbits in the control group were killed at 2 and 8 weeks during the consolidation period. The specimens were evaluated with light microscope after H & E stain. Histomorphometric analysis was done at 8 week specimens. Results: All experimental animals showed mandibular elongation on the macroscopical and radiographic evaluations. At 2 week, immature bone formation was observed from the surface of the host bone margins with collagen fibers arranged parallel to the direction of distraction in the control group; in the experimental group, immature bone formation was observed adjacent to the host bone, and the collagen fibers were not arranged uniformly. At 8 week, spindle-shaped new bone formation was seen in the direction of distraction in distracted area of the control group, while in the experimental group, the newly formed bone was arranged in a multidirectional manner, like the pattern of trabeculae. In the histomorphometric analysis of 8 weeks, the area of bone deposition was $2.12{\pm}\;0.75\;inch^2$ in the experimental group and $0.87{\pm}0.51\;inch^2$ in the control group (p<0.01). The bone deposition ratio was $29.60{\pm}10.50%$ in the experimental group and $12.10{\pm}7.17%$ in the control group (p<0.01). Conclusion: These results suggest that compression after over-distraction during the mandibular distraction osteogenesis is an effective method of increasing the amount of newly formed bone in distracted area.

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.147-156
• /
• 2008

In an uniaxial compressive test of a concrete standard specimen (150$\times$300 mm) the crack initiation and extension with the stress increase are the major reason of the failure, which is similar to the breakage of the particle bonding in the simulation by using particle bonded model, especially particle flow code in 3 dimensions (PFC3D) developed by Itasca Consulting Group Inc. That is the main motive to study the possibility of an uniaxial compressive strength test simulation. It is important to investigate the relationship between the micro-parameters and the macro-properties because the 3-dimensional particle bonded model uses the spherical particles to analyze the physical phenomena. Contact bonded model used herein has eight micro-parameters and there are five macro-properties; Young's modulus, Poisson's ratio, uniaxial compressive strength and the crack initiation stress and the ratio concerning the crack propagation with the stress. To simulate the compressive test we made quantitative relationships between the micro-parameters and the macro-properties by using the fractional factorial design and various sensitivity analyses including regression analysis, which result in the good agreement with the previous studies. Also, the stress-stain curve and the crack distribution over the specimen given by PFC3D showed the mechanical behavior of the concrete standard specimen under the uniaxial compression. It is concluded that the particle bonded model can be a good tool for the analyzing the mechanical behavior of concrete under the uniaxial compressive load.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.245-253
• /
• 2009

For the growth optimization of InAs/GaSb (8/8-ML) strained-layer superlattice (SLS), the structure has been grown under various conditions and modes and characterized by the high-resolution x-ray diffraction (XRD) analysis. In this study, the strain modulation is induced by changing parameters and modes, such as the growth temperature, the ratio of V/III beam-equivalent-pressure (BEP), and the growth interruption (GI), and the strain variation is analyzed by measuring the angle separation of 0th-order satellite peak in XRD patterns. The XRD results reveal that the growth temperature and the V/III(Sb/Ga) ratio are major parameters to change the crystallineity and the strain modulation in SLS structures, respectively. We have observed that the SLS samples with compressive strain prepared in this study are show a transition to tensile strain with decreasing V/III(Sb/Ga) ratio, and the GI process is a sensitive factor giving rise to strain modulation. These results obtained in this study suggest that optimized growth temperature and V/III(Sb/Ga) ratio are $350^{\circ}C$ and 20, respectively, and the appropriate GI time is approximately 3 seconds just before InAs growth that the crystallineity is maximized and the strain relaxation is minimized.

• Journal of Conservation Science
• /
• v.38 no.3
• /
• pp.243-253
• /
• 2022

Using non-destructive analytical methods, we identified the material characteristics of two gold fabric artifacts excavated from the Cheongsong Sim clan (Bugeum Wonsam, Jikgeum Chima), including the artifact condition, fiber type, surface contamination, and metallic threads. We found that the artifacts were buried and had turned brown; thus, we were unable to determine their original color. The fiber type was determined to be silk from cocoons, based on scanning electron microscopy, Fourier transform infrared (FT-IR) analyses of Amide I, II, III, and IV peaks, and color reactions Further, the FT-IR and X-ray fluorescence (XRF) analyses identified the white and black stains as natural resin hydrolyzed substances, such as lipids and proteins, that occurred as microbial decomposition due to body decay. Finally, the XRF analyses identified the thin gold layer of the metallic yarn as gold (Au). According to the FT-IR data and the color reaction to the metallic yarn medium, the adhesive component of the medium was a product of-Amides I, II, III, and 3000 cm^-1 within Amides A and B (an animal type), respectively. Thus, the medium was identified as Hanji (Korean paper), which is made from domestically produced Broussonetia kazinoki fibers.

• Steel and Composite Structures
• /
• v.49 no.5
• /
• pp.517-532
• /
• 2023

Tower structures have been widely used in communication and transmission engineering. The failure of joints is the leading cause of structure failure, which make it play a crucial role in tower structure engineering. In this study, the aluminum alloy three tube tower structure is taken as the prototype, and the middle joint of the tower was selected as the research object. Three different stainless steel-aluminum alloy composite joints (SACJs), denoted by TA, TB and TC, were designed. Finite element (FE) modeling analysis was used to compare and determine the TC joint as the best solution. Detail requirements of fasteners in the TC stainless steel-aluminum alloy composite joint (TC-SACJ) were designed and verified. In order to systematically and comprehensively study the mechanical properties of TC-SACJ under multi-directional loading conditions, the full-scale experiments and FE simulation models were all performed for mechanical response analysis. The failure modes, load-carrying capacities, and axial load versus displacement/stain testing curves of all full-scale specimens under tension/compression loading conditions were obtained. The results show that the maximum vertical displacement of aluminum alloy tube is 26.9mm, and the maximum lateral displacement of TC-SACJs is 1.0 mm. In general, the TC-SACJs are in an elastic state under the design load, which meet the design requirements and has a good safety reserve. This work can provide references for the design and engineering application of aluminum alloy tower structures.