• 전기학회논문지P
• /
• 제58권4호
• /
• pp.609-614
• /
• 2009

A fuel-cell power system among various alternative power sources has many advantages such as comparatively independable circumstances, high-efficient, and heat-recyclable, thus it is now able to be up to hundreds MWh-scaled through improving feasibility and longevity of it. During the last few decades, numerous research results has been investigated to expand interest in fuel-cell technology. This study presents pressure distribution on the geometrical manifold structures, which are U-type and Z-type, of a planar-type fuel-cell stack by simulated with computational fluid dynamics(CFD). Then, electrical performance of a 200W fuel-cell stack, which is U-type, was diagnosed after pre-conditioning operation. The stack has electrical characteristics ; 22V, 10A, 220W, and current density $200mA/cm^2$.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.175-178
• /
• 2003

Mechanical behavior of a fuel stack was studied by the orthotropic material model. The fuel stack is mainly composed of bipolar plate (BP), gasket, end plate, membrane electrolyte assembly (MEA), and gas diffusion layer (GDL). Each component is fastened with a suitable pressure. It is very important to maintain a suitable contact pressure of BP, because it affects the efficiency of the fuel cell. This study compared mechanical behavior of various fastening types of the fuel cell stack. Bar, band, and modified band fastening type are used. The band fastening type showed that it reduces total volume of the cell, but it does not improve the contact pressure distribution of each BP. The modified band fastening type was designed by considering the deformations of band fastening type, and it showed a good enhancement of contact pressure distribution.

• 설비공학논문집
• /
• 제27권3호
• /
• pp.152-157
• /
• 2015

Stack effect on high-rise building have negative effect on living environment, energy and life-safety aspect. Thus, it's necessary to find the measure to reduce the stack effect. As a result of field test on a 31-story building, a circulating type stack effect reduction technology was developed, which supplies air in the low stairs and discharges air in the high stairs. To evaluate the performance of this circulating type stack effect reduction technology on building stairs, a 3D numerical analysis was carried out by using Momentum Loss Model for analyzing leakage flow between compartments in a building. Consequently, numerical analysis proved that the stack effect on building stairs was reduced by a circulating type stack effect reduction technology.

• 한국수소및신에너지학회논문집
• /
• 제15권1호
• /
• pp.54-61
• /
• 2004

Temperature characteristics in a stack of molten carbonate fuel cell (MCFC) have been investigated with simulation based on the computational fluid dynamics (CFD) codes and experimental way. The MCFC has generally two stack structures when the natural gas is used as fuel; one is the external reforming type and the other is internal reforming type. Computer simulation at the external reforming stack suggests that the maximum temperature in the stack depends on the gas flow length. The 2 kW MCFC stack with 25 cm gas flow length showed about $675^\circ{C}$ of maximum temperature.

• 한국재료학회지
• /
• 제30권5호
• /
• pp.262-266
• /
• 2020

In this paper, we investigated the effect of the passivation stack with Al₂O₃, hydrogenated silicon nitride (SiN_x:H) stack and Al₂O₃, silicon oxynitride (SiON_x) stack in the n type bifacial solar cell on monocrystalline silicon. SiNx:H and SiON_x films were deposited by plasma enhanced chemical vapor deposition on the Al₂O₃ thin film deposited by thermal atomic layer deposition. We focus on passivation properties of the two stack structure after laser ablation process in order to improve bifaciality of the cell. Our results showed SiN_x:H with Al₂O₃ stack is 10 mV higher in implied open circuit voltage and 60 ㎲ higher in minority carrier lifetime than SiON_x with Al₂O₃ stack at Ni silicide formation temperature for 1.8% open area ratio. This can be explained by hydrogen passivation at the Al₂O₃/Si interface and Al₂O₃ layer of laser damaged area during annealing.

• 한국화재소방학회논문지
• /
• 제23권5호
• /
• pp.143-152
• /
• 2009

초고층건물의 수직통로에서 발생하는 연돌효과의 기체역학적 특성과 관련된 차압과 중성대의 위치 계산 및 연돌효과 발생의 가시화를 위하여 3가지 형태의 개구부를 갖는 단일 단순수직통로에 대하여 CFD 모델을 사용하여 수치해석을 하였다. 연돌효과의 차압은 이론식 계산 결과와 비교 시 수직통로의 높이가 높아질수록 차이가 커진다. 중성대 위치는 연돌효과 초기(t = 10s)에 Type A의 경우 수직통로의 높이가 30m 미만인, Type B의 경우 30m 이상인 모델에서 이론식 계산 결과와의 편차가 5% 미만으로 잘 일치한다. 따라서 수직통로 높이가 30m 이상인 다중개구부 수직통로(Type B)의 경우 CFD 모델을 사용하여 중성대 위치를 계산하는 것이 가능하다. 연돌효과의 가시화를 통하여 연돌효과의 공기 유동 현상을 쉽게 이해할 수 있다.

• Korean Chemical Engineering Research
• /
• 제60권1호
• /
• pp.12-19
• /
• 2022

소형 이송형 고분자전해질 연료전지 (PEMFC)에 많이 사용되는 cathode 개방형 PEMFC 스택은 내구성이 약한 문제점이 있다. 13개의 셀로 이루어진 PEMFC 스택의 가속 내구성 평가를 통해 스택의 열화 원인을 찾고 cathode 개방형 스택의 내구성 향상에 기여하고자 하였다. Cathode가 대기에 개방되어 있고, 기밀 유지가 어려운 cathode 개방형 스택의 구조적 문제점 때문에 시동/정지 (SU/SD)시 수소/공기 경계가 형성되어 cathode를 열화시킨다. 본 연구에서는 cathode 개방형 스택에 SU/SD 1,800회 반복 후 초기 성능의 54%가 감소하여 비교적 짧은 시간에 내구성을 평가할 수 있었다. 스택 해체 후 각 셀을 2등분하여 성능분석하였다. 전체적으로 공기 유입이 용이한 anode 출구부 MEA가 유입부 MEA보다 전극 열화가 더 심해서 SU/SD시 수소/공기 경계 형성이 주요 열화 원인임을 확인했다.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.563-567
• /
• 2009

The polymer electrolyte membrane fuel cell(PEMFC) with the advantages of low-operating temperature, high current density, low cost and volume, fast start-up ability, and suitability for discontinuous operation becomes the most reasonable and attractive power system for transportation vehicle and micro-grid power plant in a household. 200W PEM-type FCs system was integrated by this study, then the electrical characteristics and diagnosis of the fuel cell were analyzed with variations on mass flow rate and stack temperature. The ranges of the variations are 1~8L/min on $H_2$ volume and $20{\sim}70^{\circ}C$ on stack temperature.

• 대한기계학회논문집B
• /
• 제30권11호
• /
• pp.1117-1122
• /
• 2006

The PEM type regenerative fuel cell(RFC) for the ground simulator of the regeneration electric power system has been designed, manufactured, and tested. In this paper, the designing and manufacturing procedures of the RFC were presented. Also, the performance test results were showed briefly. The RFC consists of PEM type stack, humidifier, pressure and flow control valve, storage tanks, pump and controller. The performance tests were carried out with stack and system performance tests. The performance targets are more than 50% stack efficiency, 1.5kW stack power, less 400W parasitic power in design condition. Most of the performances required are satisfied.

• 한국수소및신에너지학회논문집
• /
• 제21권5호
• /
• pp.419-424
• /
• 2010

The 125kW external reforming (ER) type molten carbonate fuel cell (MCFC) system for developing a commercial prototype has been operated at Boryeong thermal power plant site since the end of 2009. The system consists of 125kW stack with $10,000 cm^2$ effective area, mechanical balance of plant (MBOP) with anode recycle system, and electrical balance of plant (EBOP). The 125kW MCFC stack installed in December, 2009 has been operated from January, 2010 after 20 days pre-treatment. The stack open circuit voltage (OCV) was 214V at initial load operation, which approaches the thermodynamically theoretical voltage. The stack voltage remained stable range from 160V to 180V at the maximum generating power of 120 kW DC. The stack has been operated for 3,270 hours and operated at rated power for 1,200 hours.