• Design & Manufacturing
• /
• 제2권6호
• /
• pp.17-22
• /
• 2008

Recently, the demand of high-productivity injection mold increases since the consumption of packaging grows in the world. Stack mold is composed of more than two molds and it has very high productivity and economic efficiency. In advanced country, stack mold which has was developed already but, in occasion of domestic mold industry, there is no study of stack mold. In this study, die and mold of in-mold labeling was developed for securing the technique of manufacturing high-productivity mold.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.374-378
• /
• 2014

The piezoelectric materials convert from mechanical energy to electrical energy. The piezoelectric materials are used in various engineering applications such as piezoelectric ultrasonic actuators. Since the piezoelectric coupling characteristics of the actuator systems should be considered at the initial design stage, it is essential to analyze the piezoelectric coupling characteristics of the ultrasonic actuators. In this study, we analyzed the electromechanical characteristics of piezoelectric stacked actuator using the equivalent circuit model with modal mass stiffness parameters. It was compared the admittance of piezoelectric stack actuators with the analytical circuit model and the finite element model. Also, the coupling coefficient of piezoelectric stack actuator was discussed according to the number of stacks of actuators.

• 한국수소및신에너지학회논문집
• /
• 제28권5호
• /
• pp.481-491
• /
• 2017

In this study, we developed 300 W lightweight DMFC system for charging secondary battery in small unit military operation. In order to reduce the volumetric shape and weight of the system considering the environment of the individual soldier's, the arranging of system components has been optimized. A metal bipolar plates made of STS-470FC have been implemented to the DMFC stack to meet the weight demand of the system. As a result of the performance test of the stack, the target value was satisfied by outputting 561 W exceeding 24% of the stack output 450 W required to output 300 W required for the entire system. Moreover, 2,655 hours exceeding 1,000 hours also has been satisfied. To ensure good robustness of the metallic bipolar plate based DMFC stack, finite element method based simulations are conducted using a commercial ANSYS Fluent software.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권1호
• /
• pp.14-16
• /
• 2015

Due to the considerable development of the technology of second generation high-temperature superconductors and a significant improvement in their mechanical and transport properties in the last few years it is possible to use HTS tapes in the magnetic levitation systems. The advantages of tapes on a metal substrate as compared with bulk YBCO material primarily in the strength, and the possibility of optimizing the convenience of manufacturing elements of levitation systems. In the present report presents the results of the magnetic levitation force measurements between the stack of HTS tapes containing $n=2{\div}200$ of tapes $12mm{\times}12mm$ and NdFeB permanent magnet in the FC and ZFC regimes. It was found a non- linear dependence of the levitation force from the height of the array of stack in both modes: linear growth at small thickness gives way to flattening and constant at large number of tapes in the stack. Established that the levitation force of stacks comparable to that of bulk samples. The numerical calculations using finite element method showed that without the screening of the applied field the levitation force of the bulk superconductor and the layered superconductor stack with a critical current of tapes increased by the filling factor is exactly the same, and taking into account the screening force slightly different.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.101-104
• /
• 2007

금속 분리판으로 제작된 연료전지 스택의 기계적인 거동을 유한요소 해석을 통하여 살펴보았다. 연료전지의 구성요소는 크게 금속 분리판, 가스켓, MEA, GDL, 엔드 플레이트로 나눌 수 있다. 각각의 요소들은 적절한 힘에 의하여 체결되어야 하고 이에 의해 연료전지 스택의 성능이 많아 좌우된다. 유한 요소해석을 위해 가스켓, GDL을 금속 분리판 위에서 변위에 따른 힘의 변화를 실험을 통해 구했으며, 금속 분리판의 유로 부분을 단순 평판으로 치환하여 유한 요소해석을 진행하였고, 해석 결과와 실험결과가 일치함을 확인하였다. 이를 통해 금속 분리판 스택이 체결되었을 때의 기계적 거동을 유추할 수 있다.

• 플랜트 저널
• /
• 제12권3호
• /
• pp.24-31
• /
• 2016

풍진동(Wind-induced vibration)은 바람에 의해 구조물에 진동이 발생하는 현상으로써 세장비가 큰 열기기 Stack 설계시 고려해야 할 중요한 사항이다. 따라서, 국제 규격에는 풍진동에 대한 설계 인자와 각 범위에 대해 필요한 고려 사항을 정의하고 있다. 규격에 의한 설계 검증은 몇몇 인자를 이용하여 간단하게 확인이 가능하다는 장점이 있는 반면, 실제 풍진동에 의한 영향을 정량적으로 평가하지 않기 때문에 실제 필요한 것보다 과도한 설계를 요구할 수 있다는 단점이 있다. 또한 여러 제약조건으로 Code 상의 요구조건을 만족하지 못하는 경우 실제 시스템의 거동을 예측할 수 없다는 단점이 있다. 이러한 점을 보완하기 위해 CFD 와 FEM 등의 수치적 해석 방법을 통해 풍진동이 실제 Stack에 미치는 영향을 해석하여 설계 적정성을 검증하여 Code 상의 요구 조건과 비교하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권2호
• /
• pp.34-38
• /
• 2013

AC Losses for face to face stacks of four identical coated conductors (CCs) were numerically calculated using the H-formulation combined with the E-J power law and the Kim model. The motive sample was the face to face stack of four 2 mm-wide CC tapes with 2 ${\mu}m$ thick superconducting layer of which the critical current density, $J_c$, was $2.16{\times}10^6A/cm^2$ on IBAD-MgO template, which was suggested for the mitigation of ac loss as a round shaped wire by Korea Electrotechnology Research Institute. For the calculation the cross section of the stack was simply modeled as vertically aligned 4 rectangles of superconducting (SC) layers with $E=E_o(J(x,y,t)/J_c(B))^n$ in x-y plane where $E_o$ was $10^{-6}$ V/cm, $J_c$(B) was the field dependence of current density and n was 21. The field dependence of the critical current of the sample measured in four-probe method was employed for $J_c$(B) in the equation. The model was implemented in the finite element method program by commercial software. The ac loss properties for the stacks were compared with those of single 4 cm-wide SC layers with the same critical current density or the same critical current. The constraint for the simulation was imposed in two different ways that the total current of the stack obtained by integrating J(x,y,t) over the cross sections was the same as that of the applied transport current: one is that one fourth of the external current was enforced to flow through each SC. In this case, the ac loss values for the stacks were lower than those of single wide SC layer. This mitigation of the loss is attributed to the reduction of the normal component of the magnetic field near the SC layers due to the strong expulsion of the magnetic field by the enforced transport current. On the contrary, for the other case of no such enforcement, the ac loss values were greater than those of single 4cm-wide SC layer and. In this case, the phase difference of the current flowing through the inner and the outer SC layers of the stack was observed as the transport current was increased, which was a cause of the abrupt increase of ac loss for higher transport current.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제16권2호
• /
• pp.177-185
• /
• 2010

광선-다각형 교차 계산은 광선 추적법 계산의 상당 부분을 차지하는 중요한 구성요소로서, 보편적으로 정적인 장면에 대해서는 kd-트리와 같은 공간 자료구조를 사용하여 교차 계산을 가속하여왔다. 최근 CPU에 비해 상대적으로 제한된 계산구조를 가지는 GPU에 적합하도록 변형된 kd-트리 탐색 기법이 몇 가지 제시되어 왔는데, 본 논문에서는 이러한 기존 방법을 보완할 수 있는 두 가지 구현 기법을 제안한다. 첫째, 트리 탐색을 위한 스택을 전역 메모리에 할당할 경우 전역 메모리 접근으로 인한 비용을 줄이고자 하는 캐쉬 적용 스택 방법과 둘째, 기존의 로프 방법의 문제점인 상당한 메모리 요구량을 줄이고자 하는 적은 깊이의 스택(short stack)을 사용한 로프 방법을 제시한다. 제안된 방법의 효용성을 보이기 위하여 기존의 GPU용 탐색 방법과의 성능 비교 분석을 수행한다. 이러한 실험 결과는 향후 GPU용 광선추적법 소프트웨어 개발자들이 상황에 맞는 적절한 kd-트리 탐색 방법을 선택할 수 있도록 해주는 중요한 정보를 제공하게 될 것이다.

• 한국주조공학회지
• /
• 제29권3호
• /
• pp.128-137
• /
• 2009

The effects of alloying elements on the mechanical properties of 3.6wt%C-2.6wt%C ductile cast iron poured into shell stack molds were investigated. The strength and hardness of the specimens obtained from the center layer in the 5-story stack mold were the lowest and those for other specimens were increased with increased distance from the center. The strength and hardness of the specimens obtained from the center layer were decreased with increased number of layers of the shell stack mold. The strength and hardness of the smaller specimens with the diameter of 9.5 mm were higher than those of 17.5 mm. On the other hand, the elongation of the former was lower than that of the latter. The strength and hardness were increased and the elongation was decreased roughly with the increased amounts of manganese and copper added, respectively. The strength and hardness were increased with the incrcased amount of molybdenum added to 0.40wt% and rather decreased with that to 0.80wt%. Those were greatly increased with the increased amount of tin added and the elongation was roughly decreased with it.

• 한국산학기술학회논문지
• /
• 제12권7호
• /
• pp.2939-2944
• /
• 2011

용융탄산염형 연료전지 시스템의 성능 향상을 위해 핵심 부분인 스택을 수치적으로 모사할 필요성이 대두되고 있다. 스택은 다양한 재질, 즉 금속, 세라믹, 폴리머 등으로 이루어져 있고 또한 단위전지 수백 장이 적층되어 제작되기 때문에 이를 전부 세세히 모델링하여 고려하는 것은 거의 불가능하다. 이에 따라 스택 전체를 하나의 균질한 물질로 대체할 수 있는 균질 물성치 도출이 요구되고 있다. 본 논문에서는 단위전지 압축률을 도입하고 모든 압축 변형이 분리판과 매트릭스에서만 일어난다는 등의 몇 가지 기본 가정 하에서 스택의 두 가지 영역, 즉 활성 영역과 매니폴드 영역에서 각각 균질 물성치를 추정하였다. 추정된 물성치를 실제 문제에 적용하여 성공적인 결과를 얻을 수 있었다.