• 한국전기전자재료학회논문지
• /
• 제25권5호
• /
• pp.334-339
• /
• 2012

A study on electrical and electronic equipment will occur in the atmosphere, which is essential to cut the power to prevent the waste of power by power measurement technology development and to develop the technology to do this operation is the main core of standby power to detect and block it and return the configured for software and hardware, while the actual construction to ensure stability through field testing and debugging of problems improved accordingly, as well as ease of installation and so it could be done while the test. In addition, in terms of basic hardware switching of standby power when blocking, reducing stress and ensure stable operation and circuit design, power off and back to ensure stable operation even when a protection circuit is applied.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.569-572
• /
• 2006

In present study, the influence of changing combustor pressure on flame stabilization and nitrogen oxide (NOX) emission in the swirl flame with secondary fuel injection was investigated. The combustor pressure was controlled by suction at combustor exit. Pressure index ($P^*=Pabs/Patm$), where Pabs and Patm indicated the absolute pressure and atmosphere pressure, was controlled in the range of 0.7~1.15 for each equivalence ratio conditions. It could be observed that flame stable region became narrower with decreasing equivalence ratio and pressure index. In this combustion system, stable flames were formed until $P^*=\;0.7$. Emission index decreased with decreasing pressure index for overall equivalence ratio conditions and NOx reduction rates were almost identical for $P^*<1$ regardless of equivalence ratio though EINOx values showed different level with change of equivalence ratio for $P^*{\geq}1$. It is also observed that EINOx decreased with increasing secondary fuel injection ratio. Emission index of nitric oxide was controllable by adjusting the changing combustor pressure and injecting secondary fuel and this NOx reduction technology is applicable to industrial furnaces and air conditioning system.

• 한국환경과학회지
• /
• 제29권7호
• /
• pp.761-772
• /
• 2020

This research investigated the meteorologically relevant characteristics of high PM_2.5 episodes in Busan. The number of days when daily mean PM₁₀ concentration exceeded 100 ㎍/㎥ and the PM_2.5 concentration exceeded 50 ㎍/㎥ over the last four years in Busan were 24 and 58, respectively. Haze occurrence frequency was 37.6% in winter, 27.4% in spring, 18.6% in fall, and 16.4% in summer. Asian dust occurrence frequency was 81.8% in spring, 9.1% in fall and winter, and 0% in summer. During summer in Busan, high PM_2.5 episode occurred under the following meteorological conditions. 1) Daytime sea breeze. 2) Mist and haze present throuout the day. 3) Anti-cyclone located around the Korean peninsula. 4) Stable layer formed in the lower atmosphere. 5) Air parcel reached Busan by local transport rather than by long-range transport. These results indicate that understanding the meteorological relevance of high PM_2.5 episodes could provide insight for establishing a strategy to control urban air quality.

• 한국주조공학회지
• /
• 제32권6호
• /
• pp.289-295
• /
• 2012

Mg-Al-Sn-Si system alloy, as a promising cheap heat-resistant Mg alloy for automobile engine part, has been investigated. Refinement of microstructure and precipitation of thermally stable secondary phases are important goal for the design of heat-resistant Mg alloy. In this study, the effect of Ce on the microstructure and room temperature mechanical properties of Mg-Al-Sn-Si alloy was investigated. High thermally stable $Mg_2Si$ phases in Mg-Al-Sn-Si alloy is very useful intermetallic compound. However, the $Mg_2Si$ phases often result in poor mechanical properties due to the coarse chinese type $Mg_2Si$ phases. The experimental specimens were fabricated by fluxless melting under $CO_2+SF_6$ atmosphere and poured into the permanent pre-heated at $200^{\circ}C$. It was told that Ce addition can modify $Mg_2Si$ phases and refine microstructure and improve the tensile strength, yield strength and elongation.

• 한국수소및신에너지학회논문집
• /
• 제22권6호
• /
• pp.772-779
• /
• 2011

New type of syngas generator based on the partial oxidation of biogas in volumetric permeable matrix reformers was suggested as an effective, adaptable and relatively simple way of syngas and hydrogen production for various low-scale applications. The use of biogas as an energy source reduces the chance of possible emission of two greenhouse gases, $CH_4$ and $CO_2$, into the atmosphere at the same time. Its nature of being a reproducible energy source makes its use even more attractive. Parametric screening studies were achieved as air ratio, biogas component ratio, input gas temperature, Steam/Carbon ratio. As the air ratio was low, the production of the hydrogen and carbon monoxide increased in the condition that 3D matrix reformer maintains the stable driving. As it was the simulation biogas in which the carbon dioxide content is high, the flammable range became narrow. And the flammable range was extended if the injected gas was preheated. The stable driving was possible in the low air ratio. The amount of hydrogen production was increased as S/C ratio increased.

• 한국추진공학회지
• /
• 제4권2호
• /
• pp.6-11
• /
• 2000

고압의 불활성 기체를 이용하여 엔진에 추진제를 공급하는 액체로켓의 경우, 추진제 탱크의 압력은 정상연소상태의 연소압을 기준으로 하여 설계한다. 그러나 연소초기의 연소실 압력은 대기압 상태이므로 과도한 유량이 공급되어 이로 인해 hard-start가 발생하며, 최악의 경우 엔진의 파손을 가져온다. 본 연구에서는 이러한 문제를 해결하고 안정된 연소를 위하여 개선된 추진제 공급시스템을 제안하며, 이는 실제 연소실험을 통해 그 성능을 규명하였다. 이 공급시스템은 연소초기의 급격한 연소실압의 상승을 막기 위하여 추진제를 예연소단계와 주연소단계의 2단계로 공급하며, 연소초기 및 연소 중의 일정한 유량공급을 위해 Cavitating Venturi를 사용하는 시스템이다. 설계 유량보다 적은 양의 추진제를 먼저 공급하여 연소압이 일정수준에 달하도록 예연소압을 형성하게 하는 방법이다. 또한, Cavitating Venturi는 오직 공급압에 의해서만 유량이 결정되며, 출구 압에 영향을 받지 않으므로 연소초기는 물론이고, 연소 중 이상연소에 의해 연소압이 떨어져도 설계치 이상의 유량이 공급되지 않는다.

• 대기
• /
• 제22권2호
• /
• pp.199-208
• /
• 2012

This study was conducted in order to analyze weather characteristics during the reign of King Sejo in the Chosun Dynasty based on The Annals of the Chosun Dynasty. For this purpose, first of all, we need to determine whether The Annals of the Chosun Dynasty is a reliable material for research on weather characteristics. Thus, we compared weather phenomena during the reign of King Sejo with those in China and Japan in the same period. From the results, it was found that The Annals of the Chosun Dynasty is a useful material at least to grasp macroscopic trends in weather phenomena. Based on this assumption, we analyzed weather characteristics during the reign of King Sejo using data from The Annals of the Chosun Dynasty. During the days of King Sejo, the climate was not changed violently and there were not many disasters caused by abnormal climate such as bad harvests. This suggests that the climate was relatively stable during the period of King Sejo. As a consequence of stable weather, famine decreased markedly. However, this was not only because of stable climate but also because of the government's active efforts to reduce disasters. As droughts and floods were not frequent, social costs for recovery from disasters also decreased considerably and the saved money could be invested in the construction of social safety nets for the prevention of disasters. One of factors supporting the enthronement of King Sejo was a series of heavily damaging bad harvests during the reign of Kings Munjong and Danjong. The prevention of bad harvests was a historical mission given to the regime of King Sejo. During his reign, King Sejo promoted various policies in order to stop bad harvests. Such efforts included the government's active construction of embankments, introduction of seeds suitable for reclaimed lands, and inspiration of the consciousness of forceful farming enduring natural disasters such as floods. As a result, abnormal weathers such as floods and droughts did not lead directly to bad harvests.

• Journal of Mechanical Science and Technology
• /
• 제20권9호
• /
• pp.1449-1458
• /
• 2006

Controlled Auto-ignition (CAI) combustion processes can be broadly divided between a CAI process that is applied to four-cycle engines and a CAI process that is applied to two-cycle engines. The former process is generally referred to as Homogeneous Charge Compression Ignition (HCCI) combustion and the later process as Active Thermo-Atmosphere Combustion (ATAC) The region of stable engine operation differs greatly between these two processes, and it is thought that the elucidation of their differences and similarities could provide useful information for expanding the operation region of HCCI combustion. In this research, the same two-cycle engine was operated under both the ATAC and HCCI combustion processes to compare their respective combustion characteristics. The results indicated that the ignition timing was less likely to change in the ATAC process in relation to changes in the fuel octane number than it was in the HCCI combustion process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.363-366
• /
• 2003

In nanomachining processes, chemical effects are more dominant factor compared with physical deformation. For example, during the nanoscratch on a silicon surface in the atmosphere, micro protuberances are formed due to the mechanochemical reaction between the diamond tip and the surface. On the contrary, in case of chemically stable materials, such as ceramics or glasse, the surface protuberance are not formed. The purpose of this study is to understand effects of the mechanochemical reaction between tip and surfaces on deformation behaviors of hard-brittle materials. Nanometerscale elasoplastic deformation behavior of single crystal silicon (100) was characterized with the surface protuberance phenomena, and compared with that of borosilicate (Pyrex glass 7740).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.86-87
• /
• 2009

High quality $CuInSe_2$ (CIS) were grown on GaAs substrate by using the hot wall epitaxy method. The behavior of point defects in the CIS layer investigated by using photoluminescence (PL) at 10 K. Point defects originating from $V_{Cu}$, $V_{Se}$, $Cu_{int}$, and $Se_{int}$ were classified as donor or acceptor types. These PL results also led us to confirm that the p-type CIS layer had obviously converted into n-type after the Cu atmosphere treatment. Finally, we found that the In in the CIS layer did not form the native defects, because In existed in the form of stable bonds in the CIS layer.