• 대한전기학회논문지
• /
• 제35권8호
• /
• pp.353-362
• /
• 1986

This paper shows that 6 pulse converter instead of 12 pulse converter can be used for the control of Superconducting Magnet Energy Storage(SMES) to improve the stability and to suppress the voltage fluctuation of power system. In order to prevent the commutation failure, when 6 pulse converter used for simultaneous control of real power and reactive power is asymmetrically controlled, stable control region has been presented by analyzing the commutation phenomena at critical points which distinguish the stable control region from the unstrol control region. Harmonic components of line current and output voltage have been calculated. Finally, computer simulation of power system stabilization has been presented to show the effectiveness of the proposed method. According to the computation results, SMES controlled by the 6 pulse converter is an effective measure in reducing the oscillation and the transient instability of the power system.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.83-90
• /
• 2004

In this study, CT specimens were prepared from spring steel(SUP9) processed shot peening which was room temperature and low temperature experiment. And we got the following characteristics from fatigue crack growth test carried out in the environment of room temperature and low temperature at $25^{\circ}C$, $-30^{\circ}C$, $-50^{\circ}C$, $-70^{\circ}C$,$-100^{\circ}C$, and $-150^{\circ}C$, in the range of stress ratio of 0.05 by means of opening mode displacement. The threshold stress intensity factor range ΔKth in the early stage of fatigue crack growth (Region I)was increased but stress intensity factor range ΔK in the stable of fatigue crack growth (Region II) was decreased in proportion to decrease temperature. It is assumed that the fatigue resistance characteristics and fracture strength at low temperature and high temperature is considerably higher than that of room temperature in the early stage and stable of fatigue crack growth region.

• 한국안전학회지
• /
• 제18권3호
• /
• pp.1-7
• /
• 2003

In this study, CT specimens were prepared from spring steel(SPS5) processed shot peening. The fatigue crack growth tests were carried out in the environment of the room temperature md low temperature at $25^{\circ}C$, $-30^{\circ}C$, $-50^{\circ}C$, $-70^{\circ}C$ $-100^{\circ}C$ and $-150^{\circ}C$ in the range of stress ratio of 0.05 by means of opening mode displacement. The threshold stress intensity factor range ΔKth in the early stage of fatigue crack growth (Region I) and stress intensity factor range $\Delta$K in the stable of fatigue crack growth (Region II) were decreased in proportion to descend temperature. It was shown that the fatigue resistance characteristics and fracture strength at low temperature are considerable higher than those of mom temperature in the early stage and stable of fatigue crack growth region.

• 한국해양학회지
• /
• 제30권4호
• /
• pp.271-278
• /
• 1995

한국 동남해역의 대륙붕 표층 쇄설퇴적물에 함유된 중광물 사립자의 연구를 위하 여 88 정점의 표층시료가 분석되고 해석되었다. 중광물 함량의 분포지역은 크게 4지역 으로 다음과 같이 나누어진다. 1)서부지역-자철석,석류석 및 ZTR 등의 안정한 중광물 이 크게 농축되어 분포함, 2) 한국해곡지역-안정한 중과물의 비교적 우세한 분포, 3) 동부지역-각섬석류와 풍화된 광물, 그리고 휘석류의 분포가 우세함, 4) 북동부 붕단지 역-안정한 광물이 적으면, 풍화 변질된 중광물이 우세함. 이와 같은 중광물의 함량 및 분포양상은 대륙붕 해저에 영향을 미치는 현세 해수면상승 (해침)의 과정에 따른 동력 학적 에너지 (파랑작동과 연안류 운동) 와 관련된 것으로 해석된다. 휘석류 중광물이 우세만 퇴적물은 일본의 화산암으로부터 기원된 것으로 제안된다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.873-876
• /
• 1993

A fuzzy controller designed by mini-max-gravity(MMG) method is essentially nonlinear with respect to the controller's input and output relationship, and stability analysis is thus needed to construct a stable control system. This paper deals with a design method of a position-type MMG fuzzy controller stable in a sense of Lyapunov when considered is a single-input-single-output linear, stable plant. We first introduce a method to construct a Laypunov function by using an eigen-value of A matrix of the linear, stable plant dynamics and then we derive an asymtotic stability condition in terms of scale factors for fuzzy state variables and controller gain. The stability condition is found reasonably practical through comparing the theoretical stability region with that obtained from simulations.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1996년도 창립기념 전력전자학술발표회 논문집
• /
• pp.1-4
• /
• 1996

The purpose of this treatise is to estimate speed of an induction motor and realize a robust speed control system with estimated speed in field-weakening region. A speed estimation is based on Model Reference Adaptive System(MRAS) technique and two flux estimator are designed to be robust against parameter variation. The MRAS-based overall control scheme has been implemented on 7.5kW Spindle induction motor control system. And it is verified that the proposed control scheme is very stable and robust in field-weakening region.

• 한국산학기술학회논문지
• /
• 제20권2호
• /
• pp.649-654
• /
• 2019

가상 환경과의 안정적인 상호작용은 사용자의 안전을 위해서 뿐만 아니라 사용자의 몰입감 향상을 위해서도 반드시 필요하다. 특히 현실감 높은 가상 강체 모델을 구현하기 위해서는 가상 강체 모델인 가상 스프링 상수를 가능한 크게 설계해야 한다. 그러나 가상 스프링 상수를 크게 하면 시스템이 불안정해지므로, 가상 스프링 상수의 크기에는 제한이 있다. 단일샘플링 주기를 이용하는 기존 방법보다 가상 스프링의 안정성 영역을 크게 하기 위해서 제안된 방법이 고주파 영차홀드를 포함한 햅틱 시스템 모델이다. 본 논문에서는 고주파 영차홀드의 샘플링 주기, 햅틱 장치의 물리적 댐퍼 크기와 안정적인 가상 스프링 최댓값과의 관계를 시뮬레이션을 통해 분석한다. 물리적 댐퍼 크기가 커질수록, 고주파 영차홀드의 샘플링 주기가 짧아질수록 가상 스프링의 안정성 영역은 커진다. 그리고 제시된 방법에서 비율 N이 40보다 커지면 물리적 댐퍼크기에 따라 안정성 영역을 기존 방법보다 약 3배~8배 더 크게 만들 수 있다. 따라서 본 방법이 가상환경 속 사용자의 현실감 향상에 도움이 될 것이다.

• 연구논문집
• /
• 통권27호
• /
• pp.183-200
• /
• 1997

We have calculated the energy of three distinct grain configurations, namely completely connected, partially connected and unconnected configurations, evolving during a spheroidization of polycrystalline thin film by extending a geometrical model due to Miller et al. to the case of spheroidization at both the surface and film-substrate interface. "Stabilitl" diagram defining a stable region of each grain configuration has been established in terms of the ratio of grain size to film thickness vs. equilibrium wetting or dihedral angles at various interface energy conditions. The occurrence of spheroidization at the film-substrate interface significantly enlarges the stable region of unconnected grain configuration thereby greatly facilitating the occurrence of agglomeration. Complete separation of grain boundary is increasingly difficult with a reduction of equilibrium wetting angle. The condition for the occurrence of agglomeration differs depending on the equilibrium wetting or dihedral angles. The agglomeration occurs, at low equilibrium angles, via partially connected configuration containing stable holes centered at grain boundary vertices, whereas it occurs directly via completely connected configuration at large equilibrium angles except for the case having small surface and/or film-substrate interface energy. The initiation condition of agglomeration is defined by the equilibrium boundary condition between the partially connected and unconnected configurations for the former case, whereas it can, for the latter case, largely deviate from the equilibrium boundary condition between the completely connected and unconnected configurations because of the presence of a finite energy barrier to overcome to reach the unconnected grain configuration.

• 한국전기전자재료학회논문지
• /
• 제18권7호
• /
• pp.647-651
• /
• 2005

We studied the external pressure-stable advanced frnge field switching (FFS) pixel design with 3 slit sructue. In this mode, a patterned pixel slit is partitioned into 3 areas, namely, two edges and a center, where the edge slit angle is larger than the center slit angle. Thus the reverse twist region in the pixel edge is reduced comparing to the conventional FFS mode so that the LC dynamics in this region becomes very stable. And also, when the external pressure is applied to the panel at the high voltage, the disclination lines (DLs) were barely intruded into active area. Therefore, the structure is use for the pen based system such as the tablet personal computer (PC), personal digital asistant (PDA).

• Journal of Communications and Networks
• /
• 제18권2호
• /
• pp.261-269
• /
• 2016

In this paper, the impact of energy constraints on a two-hop network with a source, a relay and a destination under random medium access is studied. A collision channel with erasures is considered, and the source and the relay nodes have energy harvesting capabilities and an unlimited battery to store the harvested energy. Additionally, the source and the relay node have external traffic arrivals and the relay forwards a fraction of the source node's traffic to the destination; the cooperation is performed at the network level. An inner and an outer bound of the stability region for a given transmission probability vector are obtained. Then, the closure of the inner and the outer bound is obtained separately and they turn out to be identical. This work is not only a step in connecting information theory and networking, by studying the maximum stable throughput region metric but also it taps the relatively unexplored and important domain of energy harvesting and assesses the effect of that on this important measure.