• 한국군사과학기술학회지
• /
• 제18권5호
• /
• pp.510-516
• /
• 2015

This paper describes an approach to detect interesting objects using satellite images. This paper focuses on the interesting objects that have common special patterns but do not have identical shapes and sizes. The previous technologies are still insufficient for automatic finding of the interesting objects based on operation of special pattern analysis. In order to overcome the circumstances, this paper proposes a methodology to obtain the special patterns of interesting objects considering their common features and their related characteristics. This paper applies MSER(Maximally Stable Extremal Regions) for the region detection and corner detector in order to extract the features of the interesting object. This paper conducts a case study and obtains the experimental results of the case study, which is efficient in reducing processing time and efforts comparing to the previous manual searching.

• Tribology and Lubricants
• /
• 제16권4호
• /
• pp.266-273
• /
• 2000

The friction characteristics of phenolic resin and model friction materials were investigated with the content of hexamethylenetetamine (HEXA). At 10 wt.% of HEXA, the phenolic resin and model friction materials showed the most stable friction coeffcient in constant temperature test at various test conditions because of its good thermal stability and proper curing reaction. It was found from constant interval test in mild condition that the friction coeffcients of friction materials cured with 10 wt.% of HEXA was the highest and stable values in the whole range of braking operations. However, at the severe condition in constant interval test, the friction coefficient of friction materials cured with 10 wt.% to of HEXA was lowered and as the number of braking operation increased, the values became stable. In order to obtain the thormal stable friction materials, the content of HEXA from 5 to 10 wt.% could be recommended.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.100-109
• /
• 2017

This paper proposes performance improvement schemes for sensorless PMSM control drive using a four-switch three-phase inverter (so-called B4 inverter). In the proposed scheme, the back-EMF estimation-based sensorless control algorithm is used to control the brushless PMSM without position sensors. In order to have stable operation, this paper presents a gain adjustment scheme that compensates the reduction of stable sensorless operation range as long as the rotor speed increases. In B4 topology, the center point of dc-link capacitors is connected to 3-phase load, and it is prone to have the load current distortion. Hence, to mitigate this problem, a distortion compensation scheme by modifying voltage commands using measured dc-link potentials is proposed in this paper. The validity of the proposed method is evaluated by simulations and experiments.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1992년도 추계학술발표회논문집
• /
• pp.16-21
• /
• 1992

Incandescent lamps and discharge lamps are generally used as light sources and special ballasts are needed thor stable operation of discharge lamps. In this paper, the author proposes the electronic ballast thor metal hallide lamps, experiments with high frequency square wave of frequency 22.52 KHz to avoid the acoustic resonance phenomenon and proves the usefulness of the proposed ballast. Furthermore, the author uses 220 AC voltage as a input voltage source of the proposed ballast. By examining the proposed ballast, lamp voltage of 139 V(max.) and lamp current of 1.4 A(max) can be measured. Furthermore, stable operation antral great luminouse fluxes are recognized.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.702-703
• /
• 2011

Large offshore wind farms using high voltage direct current transmission system (HVDC) have been considered and exploited in many countries in the world. The maintenance of the stable operation of wind farm and interconnected system is an important issue, especially in the case of fault. To ensure the stable operation after fault clearance, the PCC voltage must be restored as soon as possible and meet the grid code requirement. This paper will evaluate the PCC voltage recovery ability of a large offshore wind farm as it is connected to a weak grid via a VSC-HVDC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2495-2497
• /
• 2005

The satellite communication equipment, which has been installed and operated for the flood forecast and warning system at KOWACO, needs the review of the transmission Power control for keeping the stable operation of the satellite communication equipments. In this study, made the sample hardware for the transmission power control at Mini-Hubs and remote sites, and developed the control algorithm for stable operation of the transmission power controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.609-611
• /
• 1996

Zero-Cross Detector makes pilot signal to control the power to CEDM(Control Element Drive Mechanism). Existing Zero-Cross Detectors has had a problem which can cause unexpected reactor trip resulted from fluctuating frequency of input signal coming from M/G Set. The existing Zero-Cross Detector can't work properly when power frequency is varying because it was designed to work under stable M/G Set operation, and produces wrong pilot signal and output voltage. In this report the Zero-Cross Detector is improved to resolve voltage fluctuating problem by using new devices such as digital noise filtering circuit, variable cycle compensator and alarm circuit. And through the performance verification it shows that new circuit is better than old one. If suggested detector is applied to plant, it is possible to use it under House Load Operation because stable voltage can be generated by new Zero-Cross Detector.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.411-414
• /
• 1999

This paper presents design and analysis of an HID lamp ballast for a fast turn on characteristics and stable operation. It produces a high open circuit voltage for the ignition and it is controlled to supply effectively the power required to shorten the warm-up period after the breakdown. The lamp modeling by empirical data is presented. It is very effective in the designing of the control loop in the steady-state operating region. A stable operation of the lamp power regulation in the steady state is achieved, which is crucial for the long life time and constant light output. Stability analysis of the system is performed and the results are verified through various simulation results and the hardware experiments.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.366-370
• /
• 2002

GaAs has become a very popular material for the fabrication of high frequency, low noise and microwave power devices. GaAs devices are also well suited for high temperature operation because of the large band gap of this material. The standard GaAs technology and device structures have to be modified for stable operation at high temperature. In this paper, AlGaAs/GaAs HBT considering stable ohmic contact at high temperature as well as thermal effect such as self-heating effect are introduced. All the data obtained study will be used as input data for the simulator and the result will be compared with an analytical model available in this study,

• 대한기계학회논문집A
• /
• 제31권5호
• /
• pp.617-624
• /
• 2007

This paper presents a novel quadstable monolithic mechanism (QsMM) which provides four stable equilibrium positions within its operation range. The quadstable mechanism has been realized from the use of both X- and Y-directional bistable structures which use curved snapping beams. A millimeter-scale brass mechanism was fabricated by ultra-precision milling to test the quadstability and the displacement-load behavior, and the prototype clearly demonstrated four distinct stable positions in its millimeter-scale planar operation. We discuss the design concept, finite element simulation for static and transient responses, fabrication by ultra-precision milling, and experimental measurement of the proposed quadstable mechanism.