• Journal of the Korean Ceramic Society
• /
• v.32 no.1
• /
• pp.95-105
• /
• 1995

Ceria(CeO2) stabilized zirconia(CeSZ) sol was synthesized with zirconium n-butoxide Zr(OC4H9)4 and cerium nitrate hexahydrate Ce(NO3)3.6H2O as precursors and ethylacetoacetate(EAcAc) as a chelating agent under atmosphere. CeSZ films were deposited on AISI 304 stainless steel using the prepared polymeric sol by dipcoating and the coating characteristics were investigated by XRD, ellipsometry, scratch test and SEM. The CeSZ film began to crystallize from amorphous to tetragonal phase at 40$0^{\circ}C$ and it was not converted into monoclinic phase up to 100$0^{\circ}C$ by the addition of 16mol% CeO2 as a stabilizer which could suppress phase transformation of zirconia. The CeSZ films were prepared by varying the EAcAc contents and the cncentration of CeSZ sol and measured the thickness and refractive index. From these results, it was found that the EAcAc contents and concentration of CeSZ coating sol evidently affect the densification of CeSZ film. The CeSZ film coated with 0.4M CeSZ sol and heat-treated at $600^{\circ}C$ for 10min had thickness of 50nm and 17% porosity. The CeSZ film on 304 stainless steel effectively acted as a protective layer against oxidation up to 80$0^{\circ}C$ and had superior corrosion resistance in 25% H2SO4 solution for 4.5 hrs.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.3
• /
• pp.124-128
• /
• 2013

In this research, cubic zirconia is synthesized with a refined CaO from shells as a stabilizer through Skull melting method. The proper process time and concentration are defined by Hydration reaction to produce the refined CaO after two different treatments using 0.1 mol% of HCl respectively with Cockle shell. The highest purity of CaO is reached when the shell is immersed in 1 mol% HCl. In Hydration reaction step, the pure $Ca(OH)_2$ is produced at $45^{\circ}C$ for 24 hours. The highest purity of CaO is measured when the $Ca(OH)_2$ is treated by heat at $1200^{\circ}C$ for 5 hours. The single crystals are grown through Skull melting method by adding the different contents of the refined CaO from 10 mol% to 30 mol% into $ZrO_2$. The frequency of High-frequency oscillator used for Skull melting method is 3.4 MHz. The descending speed of the single crystal is 3 mm/hour. The grown length of the single crystal is 4 cm. As a result of this study, 15 mol% of CaO has the best crystallinity.

• Journal of Conservation Science
• /
• v.33 no.3
• /
• pp.215-223
• /
• 2017

The purpose of this study is to reveal the characteristics, correlations, and colorant materials of those using the chemical compositions of 30 glasses excavated from the Sarari hall of the Mireuksaji stone pagoda, and to determine the correlations between them and other glass excavated from the Wanggungri site. The results of the chemical analysis of the 11 glass beads show that they are a soda glass group with high contents of $SiO_2$ and $Na_2O$; these can be further subdivided into soda-alumina groups ($Na_2O-Al_2O_3-CaO-Si_2O$). The characteristics of the stabilizer are classified as being of the high alumina glass group (LCHA), except for two glasses. It was concluded that colorant materials affected the coloring for glass beads by various components including Ti, Mn, Fe, Cu and Pb. In addition, we examined six lead glasses which are glass plate and unknown fragments that are of a common lead glass system ($PbO-SiO_2$) with respect to the average contents of PbO (70wt.%) and $SiO_2$ (30wt.%). As a result of comparing these relics with those of the glass beads excavated by Wanggungri, there is a similarity in that they belong to the soda glass group. However, the contents of $Na_2O$ are relatively higher than that of the glass beads in the Mireuksaji pagoda, and most of relics include glasses with a low content of $K_2O$ and CaO. In addition, the PbO and $SiO_2$ contents are slightly different in the lead glass. It seems that the glass relics made at two different sites may have used different raw materials or techniques.

• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.117-123
• /
• 2021

In this study, the composite was prepared by mixing SiOx, soft carbon, and carbon black and the electrochemical properties of lithium ion battery were investigated. The content of SiOx added to improve the capacity of the soft carbon anode material was varied to 0, 6, 8, 10, 20 wt%, and carbon black was added as a structural stabilizer for reducing the volume expansion of SiOx. The physical properties of prepared CB/SiOx/C composite were investigated through XRD, SEM, EDS and powder resistance analysis. In addition, the electrochemical properties of prepared composite were observed through the charge/discharge capacity, rate and impedance analysis of the lithium ion battery. The prepared CB/SiOx/C composite had an inner cavity capable of mitigating the volume expansion of SiOx by adding carbon black. The formed internal cavity showed a low initial efficiency when the SiOx content was less than 8 wt%, and low cycle stability when the content of SiOx was less than 20 wt%. The CB/SiOx/C composite containing 10 wt% of SiOx showed an initial discharge capacity of 537 mAh/g, a capacity retention rate of 88%, and a rate of 79 at 2C/0.1C. SiOx was added to improve the capacity of the soft carbon anode material, and carbon black was added as a structural stabilizer to buffer the volume change of SiOx. In order to use the CB/SiOx/C composite as a high-efficiency anode material, the mechanism of the optimal SiOx and the use of carbon black as a structural stabilizer was discussed.

• Journal of Applied Biological Chemistry
• /
• v.65 no.4
• /
• pp.349-355
• /
• 2022

In this study, we sought to identify a soil stabilizer that can be applied to paddy fields vulnerable to arsenic (As) pollution. To this end, we conducted a pot experiment in which we evaluated the effects of different stabilizers on the bioavailability of As in paddy soil. As candidate stabilizers, we assessed calcium superphosphate (CSP), sulfur, and steel slag, which were applied at the rates of 0.7 and 1.4, 0.1 and 0.2, and 7.0 and 14.0 Ma ha^-1, respectively. On day 67 after rice transplantation, we detected significantly lower concentrations of As in the solutions of paddy soil treated with 1.4 Ma ha^-1 CSP (96.9 ㎍ L^-1) and 0.2 Ma ha^-1 sulfur (207.2 ㎍ L^-1) compared with the As concentrations in control (314.5 ㎍ L^-1) and steel slag-treated (268.6-342.4 ㎍ L^-1) soil. Compared with the As concentrations in control brown rice (0.16 mg kg^-1), concentrations in brown rice were lowest in the pots treated with 1.4 Ma ha^-1 CSP (0.09 mg kg^-1). Furthermore, in response to CSP treatments, we detected increases in the weight of rice grains (50.0-50.4 g/pot) compared with the control (40.4 g/pot) and other treatments (26.9-48.1 g/pot), which we speculate could be attributed to the reduction in As toxicity to rice owing to a decline in soil solution As contents and the fertilization effect of the CSP treatment. Collectively, our findings indicate a high-level application of CSP (1.4 Ma ha^-1) to paddy soil has a comparatively beneficial effect in mitigating the bioavailability of As.

• Korean Journal of Materials Research
• /
• v.22 no.9
• /
• pp.465-469
• /
• 2012

This paper focuses on the after synthesis of CdTe quantum dots(QDs) in aqueous solution. CdTe nanoparticles were prepared in aqueous solution using mercaptocarboxylic acid or thioglycolic acid(TGA) as stabilizing agents. QDs emit light smaller than the nano size. The contents of the mercaptocarboxylic acid, and a kind of raw material, were revealed for a period of time. We succeeded in synthesizing a very high quality QDs solution; we discussed how to make QDs better and to keep them stabilized. TGA is known as one of the best stabilizing agents. Many papers have mentioned that TGA is a good stabilizing agent. We dramatically confirmed the state of QDs after the experiments. The QDs solution can be influenced by several factors. Different content of TGA can influence the stability of the CdTe solution. Most papers deal with the synthesis of CdTe, so we decided to discuss the after synthesis process for the stability of the CdTe solution.

• Korean Journal of Materials Research
• /
• v.21 no.8
• /
• pp.425-431
• /
• 2011

The industrial manufacturing of YSZ products can be summarized as a three step process: a) hydrolysis of zirconyl chloride and mixing of other solutions, b) precipitation, and c) calcination. The addition of ammonia or OH- is essential in the precipitation process. However, a strong agglomeration was observed in the results of an ammonia or OH- addition. Thus, it is necessary to disperse the powders smoothly in order to improve the mechanical strength of YSZ. In this study, YSZ was synthesized using the urea stabilizer and hydrothermal method. YSZ powders were synthesized using a hydrothermal method with Teflon Vessels at $180^{\circ}C$ for 24 h. The mole ratio of urea to Zr was 0, 0.5, 1, and 2. The crystal phase, particle size, and morphologies were analyzed. Rectangular specimens ($33\;mm{\times}8\;mm{\times}1{\pm}0.5\;mm$) for three-point bend tests were used in the mechanical properties evaluation. The crystalline of YSZ powders observed a tetragonal phase in the sample with a ratio of Zr:urea = 1:2 addition and a hydrothermal reaction time of 24 h. The average primary particle size of YSZ was measured to be 9 nm to 11 nm. The agglomerated particle size was measured from 15 nm to 30 nm. The three-point bending strength of the YSZ samples was 142.47 MPa, which is the highest value obtained for the Zr:urea = 1:2 ratio addition YSZ sample.

• Geotechnical Engineering
• /
• v.13 no.4
• /
• pp.5-12
• /
• 1997

The potentiality of water treatment sludge as the alternative liner and cover materials in landfills is investigated. A series of tests were performed on sludge admixtures to examine their compaction, compressive strength, leaching, hydraulic conductivity characterisit its and the compatibility with representative leachate within landfills. Results from the tests show that low hydraulic conductivity can berachieved with sufficient stabilizer contents and curing. It is recognized that the hydrauac conductivity decreases with increasing bentonite content and the percentage of bentonite needed to make the hydrauic conductivity below 1$\times$10-7cm/ sec was 40% for water treatment sludge. It was found that the effect of the municipal waste leachate on the hydraulic conductivity of the admixtures is negligible.

• Journal of Radiation Protection and Research
• /
• v.3 no.1
• /
• pp.23-28
• /
• 1978

In order to investigate corelation between contents of dioctylphthalate in polyvinylchloride blent dibutyl tin dilaulate with dibutyl tin maleate as stabilizer and the behaviors of radiation resistance as well as electrical conductivity on irradiated specimens, several observations were carried out. A characteristic peak observed in the range of $1,540-1,640cm^{-1}$ on infrared spectra shows such a sensitive response to radiation as the intensity decreases with increasing doses and that this tendency strongly depressed in the presence of plasticizer. It is seemingly attributed for origin of the peak to the existence of RCOO- ion resulting from dissociation of stabilizere, further the depressive effect of decreasing peak intensity influenced by radiation seems to be caused by resonance absorption in benzen ring being a consistituent of plasticizer. It is also suggestive to be use the peak behavior influenced by radiation as a criterion for the evaluation of radiation resistance of PVC. Further the results obtained from electrical conductivity measurement also exhibit reasonable characteristics explainable with views used for the interpretation of the peak behavior mentioned previousely.

• Advances in environmental research
• /
• v.3 no.2
• /
• pp.107-116
• /
• 2014

This study aimed to synthesize dispersed and reactive nanoscale zero-valent iron (nZVI) with poly(1-vinylpyrrolidone-co-vinyl acetate) (PVP/VA), nontoxic and biodegradable stabilizer. The nZVI used for the experiments was prepared by reduction of ferric solution in the presence of PVP/VA with specific weight ratios to iron contents. Colloidal stability was investigated based on the rate of sedimentation, hydrodynamic radius and zeta potential measurement. The characteristic time, which demonstrated dispersivity of particles resisting aggregation, increased from 21.2 min (bare nZVI) to 97.8 min with increasing amount of PVP/VA (the ratios of 2). For the most stable nZVI coated by PVP/VA, its reactivity was examined by nitrate reduction in a closed batch system. The pseudo-first-order kinetic rate constants for the nitrate reduction by the nanoparticles with PVP/VA ratios of 0 and 2 were 0.1633 and $0.1395min^{-1}$ respectively. A nitrogen mass balance, established by quantitative analysis of aqueous nitrogen species, showed that the addition of PVP/VA to nZVI can change the reduction capacity of the nanoparticles.