• 한국군사과학기술학회지
• /
• 제17권6호
• /
• pp.786-792
• /
• 2014

In this paper, we propose a novel method which can be applied to test and verify the stabilization-tracking performance of Gun/Turret Driving System(GTDS) for Light Armed Helicopter(LAH). In real system, GTDS is connected to TADS/SMC and drived to aim at the target with 20mm gun. But each equipment is separately developed during exploratory development stage, so GTDS cannot be tested under real system state. We suggest new configuration of test system for evaluating the stabilization-tacking performance, in which TADS and SMC are replaced by vision acquisition unit and processing unit, respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.525-528
• /
• 2005

The tracking antenna system must be always pointed to target moving vehicle. Especially, for an antenna mounted on a movable vehicle, it needs the stabilized antenna system. In this paper, two types of fuzzy controller were derived and applied to a data link antenna system and the altitude control of unmanned helicopter, respectively. A simplified Fuzzy-PID controller was designed for 2-axes antenna stabilization and tracking system and the performance was verified by simulations and experiments. Computer simulations were performed by Matlab and SIMULINK. A 2-Axes antenna (SeaTel 1898 model) was selected as test platform of this research. The antenna was modified by using two Blushless Direct Current motors and an embedded DSP controller. To verify the performance of designed antenna servo control system, the performance of the conventional PID controller and that of the Fuzzy-PID controller, designed by the same PID control gains, were compared.

• 한국항공우주학회지
• /
• 제38권5호
• /
• pp.490-498
• /
• 2010

본 논문에서는 소형 무인항공기에 영상 획득용 카메라를 장착하여 지상의 이동물체를 자동으로 추적하고 지상으로 영상정보를 지속적으로 전송하는 기술 및 관련 이론에 대한 연구를 다루고 있다. 본 연구에 사용된 회전익 무인항공기에는 소형 고성능의 영상획득 장치와 지상표적에 대한 식별 지향 자동추적 알고리즘이 탑재되었고 더욱 안정된 영상추적을 위해 영상 안정화 기법을 추가적으로 적용하였다. 최종적으로 모든 연구내용에 대해 비행시험을 수행하여 그 성능을 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.413-416
• /
• 2004

The tracking antenna system must be always pointed to a satellite for data link among moving vehicles. Especially, for an antenna mounted on a moving vehicle, it needs the stabilized the antenna system. So, software and hardware, signal processing of motion detection sensors, real-time processing of vehicle dynamics, trajectory estimation of satellite, antenna servo mechanism, and tracking algorithm, are unified in the antenna system. The purpose of this paper is to design the embedded tracking antenna control system for satellite communication. The embedded OS(Operating System) based stabilization and tracking algorithm was implemented. The performance of the designed embedded control system was verified by the real satellite communication test.

• 대한기계학회논문집A
• /
• 제32권4호
• /
• pp.340-346
• /
• 2008

An unmanned surveillance robot consists of a machine gun, a laser receiver, a thermal imager, a color CCD camera, and a laser illuminator. It has two axis control systems for elevation and azimuth. Because the current robot system is mounded at a fixed post to take care of surveillance tasks, it is necessary to modify such a surveillance robot to be installed on an UGV (Unmanned Ground Vehicle) system in order to watch blind areas. Thus, it is required to have a stabilization system to compensate the disturbance from the UGV. In this paper, a simulation based design scheme has been adopted to develop a mobile surveillance robot. The 3D CAD geometry model has first been produced by using Pro-Engineer. The required pan and tilt motor capacities have been analyzed using ADAMS inverse dynamics analysis. A target tracking and stabilization control algorithm of the mobile surveillance robot has been developed in order to compensate the motion of the vehicle which will experience the rough terrain. To test the performance of the stabilization control system of the robot, ADAMS/simulink co-simulations has been carried out.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.337-340
• /
• 2004

Stabilizing systems with Gyroscope are extensively used in various tracking devices for attaining the system's objective. Because of putting performance first in importance of system and focusing on specification of parts, designers are sometimes passing over the dynamic characteristics of system in vibrating condition. In this paper, we were dealing with unstable stabilizing control due to coincidence of stabilization platform natural frequency and that of Gyroscope used for sensing rate. For solving this problem, statics and dynamic test of silicon rubber with 3 different hardness were performed and similar stabilizing system was adopted to prove reasonability of rubber choice and static pre-strain.

• 항공우주시스템공학회지
• /
• 제10권1호
• /
• pp.86-94
• /
• 2016

In this paper, position control of focal plane compensation device using piezoelectric actuator is conducted. The forcal plane compensation device installed on earth observation satellite camera compensates micro-vibration from reaction wheels. In this study, four experimental models of the open-loop compensation device are derived using MATLAB system identification toolbox in the input range of 0~50Hz. Subsequently, the PID controller for each model is designed and the performance test of each controller is conducted through MATLAB/Simulink. According to frequency response analysis of the closed-loop compensation device system, the PID controller designed for 38~50Hz input range has enough tracking performance for the whole 0~50Hz input range. The maximum output error is about $1{\mu}m$ for the input range. The simulation results has been verified by the experimental method.

• 대한기계학회논문집A
• /
• 제38권2호
• /
• pp.129-136
• /
• 2014

기동형 경계 로봇의 목표 추적 시스템은 효율적인 경계 임무를 수행하는데 있어서 중요한 부분이다. 본 논문은 영상 장치를 포함한 3 축 기동형 경계로봇의 영상 정보를 이용한 목표 추적 알고리즘을 제안하였다. 제안된 목표추적 알고리즘에서는 카메라 영상의 중심과 카메라 영상으로 포착된 목표물 중심 사이의 위치 에러를 이용하여 영상 장치의 목표 지향 벡터를 획득하였으며, 위치 에러를 획득하기 위하여 영상 처리 기법 중 하나인 CAMShift(Continuously Adaptive Mean Shift) 알고리즘을 적용하였다. 최종적으로, 목표 추적 알고리즘을 실험 모델에 적용해 봄으로써 실제 실험 환경에서의 목표 추적 알고리즘의 적용 타당성을 검증하였다.