• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.5
• /
• pp.307-314
• /
• 2021

Even though the LCL filters have superior harmonic attenuation ability to L filters, stability has always been an issue. The system could be unstable because of the resonance phenomenon, especially when digital controller is used. Adding a notch filter to the compensator is one approach to solve the problem. Resonance phenomenon can be inhibited by aligning notch frequency to system resonance frequency. However, resonance frequency variation can be obtained because the actual system has a nonstationary characteristic. Therefore, the system could be unstable, where the system parameters are changed when the conventional notch filter is used. An adaptive digital notch filter that stabilizes the system even system parameters are changed. Simulation and experiment results are provided to verify the validity of the proposed adaptive filter.

• The Journal of Korea Robotics Society
• /
• v.5 no.4
• /
• pp.367-376
• /
• 2010

This Paper Proposes A Robust Image Stabilization System For A Mobile Robot Using An Extended Kalman Filter (Ekf). Though Image Information Is One Of The Most Efficient Data Used For Robot Navigation, It Is Subjected To Noise Which Is The Result Of Internal Vibration As Well As External Factors Such As Uneven Terrain, Stairs, Or Marshy Surfaces. The Camera Vibration Deteriorates The Image Resolution By Destroying The Image Sharpness, Which Seriously Prevents Mobile Robots From Recognizing Their Environment For Navigation. In This Paper, An Inclinometer Was Used To Measure The Vibration Angle Of The Camera System Mounted On The Robot To Obtain A Reliable Image By Compensating For The Angle Of The Camera Vibration. In Addition The Angle Prediction Obtained By Using The Ekf Enhances The Image Response Analysis For Real Time Performance. The Experimental Results Show The Effectiveness Of The Proposed System Used To Compensate For The Blurring Of The Images.

• Journal of the Optical Society of Korea
• /
• v.3 no.1
• /
• pp.32-34
• /
• 1999

We successfully demonstrated a stabilized fiber-optic Mach­Zehnder interferometer filter with continuous tunability. The tunable scheme was achieved with fine wavelength control of an 1.3${\mu}{\textrm}{m}$ tunable laser diode used as a stabilization light source. The transmission wavelength of the tunable filter was shifted linearly with respect to the wavelength change of the stabilization light source.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.10
• /
• pp.27-33
• /
• 2016

This paper proposes a Low Noise Amplifier (LNA) with chopper stabilization technique with a sample-hold circuit. Chopper stabilization technique is effective in terms of reducing low frequency offset and flicker noise. Conventional chopper amplifier has a disadvantage in area because of using Low Pass Filter (LPF) for remove chopping spike. The proposed chopper amplifier employed sample and hold technique to decrease chopping spike instead of LPF that improves 36% in voltage damping and 11% in area.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.2
• /
• pp.157-163
• /
• 2011

This paper proposes a hybrid image stabilizing system which uses both optical image stabilizing system based on EKF (Extended Kalman Filter) and digital image stabilization based on SURF (Speeded Up Robust Feature). Though image information is one of the most efficient data for object recognition, it is susceptible to noise which results from internal vibration as well as external factors. The blurred image obtained by the camera mounted on a robot makes it difficult for the robot to recognize its environment. The proposed system estimates shaking angle through EKF based on the information from inclinometer and gyro sensor to stabilize the image. In addition, extracting the feature points around rotation axis using SURF which is robust to change in scale or rotation enhances processing speed by removing unnecessary operations using Hessian matrix. The experimental results using the proposed hybrid system shows its effectiveness in extended frequency range.

• Journal of IKEEE
• /
• v.19 no.2
• /
• pp.244-253
• /
• 2015

Please This paper presents method of video stabilization based on detection and adaptive motion smoothing filtering of undesirable motion. The proposed algorithm consists of two stages: the detection of undesirable motion and smoothing filtering of detected undesired motion. To incorporate desired properties into the motion smoothing process, the local maximum and the local minimum are defined in a set composed of the parameters of accumulative global motion. Using the local information, the constraints on detecting undesirable motions are defined. Based on these constraints, the alpha parameter of the alpha-trimmed means filter is adjusted, so that the degree of motion smoothing in the reconstructed video sequence is controlled. The experimental results demonstrated the capability of the proposed algorithm.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.4
• /
• pp.515-519
• /
• 2003

This paper proposes a new image sequence stabilization (ISS) scheme based on filtering of absolute frame positions. The proposed ISS scheme removes undesired motion effects in real-time, while preserving desired gross camera displacements. The well-known finite impulse response (FIR) filter is adopted for filtering. The proposed ISS scheme provides a filtered position and velocity with fine inherent properties. It is demonstrated that the filtered position is not affected by the constant velocity. It is also shown that the filtered velocity is separated from the position. Via numerical simulations, the performance of the proposed scheme is shown to be superior to the existing Kalman filtering scheme.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.7
• /
• pp.871-877
• /
• 2018

In this paper, we propose a triple nested PID control scheme for stable hovering of a quadrotor and propose a complementary filter based sensor fusion technique to improve the performance of attitude, altitude and velocity measurement. The triple nested controller has a structure in which a double nested attitude controller that has the angular velocity PD controller in inner loop and the angular PI controller in outer loop, is nested in a velocity control loop to enable stable hovering even in the case of disturbance. We also propose a sensor fusion technique by applying a complementary filter in order to reduce the noise and drift error included in the acceleration and gyro sensor and to measure the velocity by fusing image, gyro, and acceleration sensor. In order to verity the performance, we applied the proposed control and measurement scheme to hovering control of quadrotor.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.2
• /
• pp.178-185
• /
• 2011

Optical image stabilization is a device to compensate the camera movement in the exposure time. The compensation is implemented by movable lens or image sensor that adjusts the optical path to the camera movement. Generally, the camera is moved by a handshake, thus the handshake is considered as an external disturbance. However, there are many other vibrations such as car and train vibration. In this paper, the optical image stabilization system in high frequency region is presented. Notch filter and lead compensator are designed and applied to improve the stability without changing the actuator. To verify the performance of the optical image stabilization system in high frequency region, the experiment equipment with moving object is established. It is confirmed that the opticalimage stabilization system does not diverge at the resonance frequency.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.2
• /
• pp.106-111
• /
• 2009

Real-time video stabilization technology is used in correction for the camera vibrations of the hand-held camera by hand or fixed camera by external condition. This paper is about the counterplan to cope with the vibration of the movie generated by the large external cause relatively. we use the movie stabilization parameters with the phase correlation method based the DFT to get the displacements of the current frame to the reference frame. we use the kalman filter for the efficient and stable searching works on the phase correlation map and present the proper conditions for the real-time processing through the experiments. We propose the measure to evaluate the capability of the video stabilizer which is the standard deviation of the brightness of the center block. and compare the capability for the video sequences randomly shifted and the jittered video sequences obtained from camera.