• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.536-545
• /
• 2015

This study aimed to investigate the effect of various emulsifiers on the formation of nanoemulsions and their stability properties. MCT (medium chain triglyceride) nanoemulsions were prepared (10 wt% oil, 10 wt% emulsifiers, 20 mM bis-tris, pH 7) with emulsifier such as Tween 20 (Polyoxyethylene(20) sorbitan monolaurate), Almax 3800 (Sorbitan monooleate), soy lecithin, and SSL (sodium stearoyl lactylate) and changes in fat globule size with respect to storage period and stability properties by Turbiscan were investigated. In case of control nanoemulsion with 10 wt% Tween 20, the initial fat globule size was 89.0 nm and 113.4 nm after 28 day of storage and this large increase (ca. 24 nm) was thought to be caused by Ostwald ripening. When Tween 20 was partially replaced with Almax 3800, lecithin and SSL in nanoemulsions, their physicochemical properties (i.e., fat globule size and stability) were changed accordingly. In general, the intial fat globule size was decreased with increasing the concentration of the emulsifiers and the stability against Ostwald ripening increased. The most stable nanoemulsions against Ostwald ripening could be prepared with emulsifiers of Tween 20 and Almax 3800 or lecithin in the ratio of 6:4 (wt%), which was verified with Ostwald ripening rate (${\omega}$). In addition, the emulsion stability by Turbiscan was observed to be consistent with results of changes in fat globule size with storage period.

• Journal of KSNVE
• /
• v.6 no.2
• /
• pp.163-177
• /
• 1996

An investigation on thermohydraulic stability of flow oscillations in the CANada Deuterium Uranium-600(CANDU-6) heat transport system has been conducted. Flow oscillations in reactor coolant loops, comprising two heat sources and two heat sinks in series, are possibly caused by the response of the pressure to extraction of fluid in two-phase region. This response consists of two contributions, one arising from mass and another from enthalpy change in the two-phase region. The system computer code used in the investigation os SOPHT, which is capable of simulating steady states as well as transients with varying boundary conditions. The model was derived by linearizing and solving one-dimensional, homogeneous single- and two-phase flow conservation equations. The mass, energy and momentum equations with boundary conditions are set up throughout the system in matrix form based on a node-link structure. Loop stability was studied under full power conditions with interconnecting the two compressible two phase regions in the figure-of-eight circuit. The dominant function of the interconnecting pipe is the transfer of mass between the two-phase regions. Parametric survey of loop stability characteristics, i. e., damping ratio and period, has been made as a function of geometrical parameters of the interconnection line such as diameter, length, height and orifice flow coefficient. The stability characteristics with interconnection line has been clarified to provide a simple criterion to be used as a guide in scaling of the pipe.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.1
• /
• pp.23-29
• /
• 2010

Pigment concentrates with violet-red color and sweet taste were obtained from purple-fleshed sweet potato(PFSP) using ethyl alcohol and water. Extract from general potato(GP) were used as a control. The relative stability of PFSP pigment concentrate(PFSPPC) in a storage test over 15 days was confirmed in the order of dark > fluorescence > sun-light irradiation. The relative stability of GP pigment concentrate(GPPC) in a storage test over 15 days was confirmed in the order of sun-light > fluorescence > dark storage. The RRP of PFSPPC was higher than that of GPPC, but the color strength of GPPC was 1/2 that of PFSPPC. Treatment of PFSPPC with aluminum potassium sulfate(0.2~0.3%, w/w) best improved its stability. The improved RRPs of PFSPPC were 45.16~47.31% in sun light irradiation, 55.91~60.22% in fluorescence irradiation, and 76.34~75.97% in dark storage conditions. In substituting aluminum potassium sulfate for chitosan, an amount of 0.2~0.3%(w/w) was suitable, giving similar results in improving pigment stability for all concentrates tested. Also, freeze-dried PFSPPC powder was manufactured as a substitute for dextrin, and also as a substitute for chitosan to the extent of 0.25%(w/w). The results of storage stabilite for freeze-dried PFSPPC and GPPC powder over 15 days, irradiation were, PRRs of 74.47~89.36% and 61.54~76.92%, respectively. The stability improving effect of freeze dried PFSPPC powder was confirmed by the results of storage experiments at various conditions. The use of freeze-dried PFSPPC powder was therefore confirmed to be an effective treatment for general foods.

• Korean Journal of Plant Resources
• /
• v.28 no.6
• /
• pp.697-703
• /
• 2015

Twenty apple germplasm accessions from the Korean Genebank were successfully cryopreserved using two-step freezing to back up genetic resources maintained by field collections. This study examined the morphological and genetic stability of cryopreserved dormant apple buds that were stored in liquid nitrogen, and then rewarmed and regrown. Whole plants were regenerated directly from dormant buds through budding without an intermediary callus phase. The cryopreserved buds produced high levels of shoot formation (76.2-100%), similar to those of noncryopreserved buds (91.3-100%), with no observed differences between cryopreserved and noncryopreserved materials. Three of the twenty cryopreserved apple germplasm accessions were used to assess morphological and genetic stability. No differences in morphological characteristics including shoot length, leaf shape, leaf width/length ratio, and root length were observed between controls (fresh control and noncryopreserved) and cryopreserved plantlets. The genetic stability of regenerants (before and after cryopreservation) was investigated using inter simple sequence repeat (ISSR) markers. The ISSR markers produced 253 bands using four primers, ISSR 810, SSR 835, ISSR 864, and ISSR 899. These markers showed monomorphic banding patterns and revealed no polymorphism between the mother plant and regenerants before and after cryopreservation, suggesting that cryopreservation using two-step freezing does not affect the genetic stability of apple germplasm. These results show that two-step freezing cryopreservation is a practical method for long-term storage of apple germplasms.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.9
• /
• pp.31-45
• /
• 2012

This study was conducted to estimate the stability of a quay wall in case of wave overtopping under the combined action of an earthquake and tsunami using limit equilibrium method. The tsunami force was calculated by using a numerical program called TWOPM-3D (3-D one-field Model for immiscible TWO-Phase flows). Especially, the wave force acting behind the quay wall after a tsunami wave overtopping was estimated by treating back fill as a permeable material. The stability of the quay wall was assessed for both the sliding and overturning modes under passive and active conditions. The variation in the stability of the quay wall with time was determined by parametric studies, including those for the tsunami wave height, seismic acceleration coefficient, internal friction angle of the soil, wall friction angle, and pore water pressure ratio. When the earthquake and tsunami were considered simultaneously, the tsunami induced wave overtopping increased the stability of the quay wall under the passive condition, but in the active condition, the safety factors decreased.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.2
• /
• pp.225-237
• /
• 2006

Based on the study conducted by Kim et al. (205a, b), an improved stability design method for evaluating the effective buckling lengths of beam-column members is proposed herein, using system elastic/inelastic buckling analysis and second-order elastic analysis. For this purpose, the stress-strain relationship of a column is inversely formulated from the reference load-carrying capacity proposed in design codes, so as to derive the tangent modulus of a column as a function of the slenderness ratio. The tangent stiffness matrix of a beam-column element is formulated using the so-called "stability functions," and elastic/inelastic buckling analysis Effective buckling lengths are then evaluated by extending the basic concept of a single simply-supported column to the individual members as one component of a whole frame structure. Through numerical examples of several structural systems and loading conditions, the possibilities of enhancement in stability design for frame structures are addressed by comparing their numerical results obtained when the present design method is used with those obtained when conventional stability design methods are used.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2427-2434
• /
• 2022

Series of unequal quantity Nd/Ce co-doped ceramic nuclear waste forms, (Gd, Nd)₂(Zr, Ce)₂O₇, were prepared to tailor its ordered pyrochlore or disordered fluorite structure. The phase transition, microtopography, and elemental composition of the ceramic samples were systematically investigated, especially the effect of order-disorder structure on the chemical stability. It was confirmed that unequal quantity of Nd/Ce could synchronously replace the Gd/Zr-sites of Gd₂Zr₂O₇. And the phase transition of order-disorder structure could be successfully tailored by regulating the average cationic radius ratio of (Gd, Nd)₂(Zr, Ce)₂O₇ series. The elements of Gd, Nd, Zr, and Ce are uniformly distributed in the ordered or disordered structures. The MCC-1 leaching results showed that (Gd, Nd)₂(Zr, Ce)₂O₇ pyrochlore ceramic nuclear waste forms had excellent chemical stability, whose elements' normalized leaching rates were as low as 10^-4-10^-7 g·m^-2·d^-1 after 7 days. In particular, the chemical stability of disordered structure was superior to that of ordered structure. It was proposed that the force constant and the closest packing were changed with the structure transformation resulting the chemical stability difference.

• Geomechanics and Engineering
• /
• v.27 no.6
• /
• pp.551-560
• /
• 2021

Due to the low strength and high compressibility characteristics, the loess deposits tunnels are prone to large deformations and collapse. An accurate stability evaluation for loess deposits is of considerable significance in deformation control and safety work during tunnel construction. 37 groups of representative data based on real loess deposits cases were adopted to establish the stability evaluation model for the tunnel project in Yan'an, China. Physical and mechanical indices, including water content, cohesion, internal friction angle, elastic modulus, and poisson ratio are selected as index system on the stability level of loess. The data set is randomly divided into 80% as the training set and 20% as the test set. Firstly, principal component analysis (PCA) is used to convert the five index system to three linearly independent principal components X1, X2 and X3. Then, the principal components were used as input vectors for probabilistic neural network (PNN) to map the nonlinear relationship between the index system and stability level of loess. Furthermore, Leave-One-Out cross validation was applied for the training set to find the suitable smoothing factor. At last, the established model with the target smoothing factor 0.04 was applied for the test set, and a 100% prediction accuracy rate was obtained. This intelligent classification method for loess deposits can be easily conducted, which has wide potential applications in evaluating loess deposits.

• Environmental and Resource Economics Review
• /
• v.32 no.2
• /
• pp.77-105
• /
• 2023

This paper investigates the management stability of KOSPI-listed energy public enterprises from the perspective of median voter theory. We analyze the profitability and stability of five energy public enterprises during the period 2011~2022, and conduct an empirical analysis to determine whether they are related to the preferences of median voters who can represent the general public. Our analysis of the profitability and stability of the energy public enterprises shows that the stability of their has been deteriorating in recent years. The results of the empirical analysis also show that the management stability of the energy public enterprises is related to the preference of median voter. Specifically, they indicate that when the median voter's income is smaller than the average income, the profitability of the utility decreases and the debt ratio increases. This paper suggests that from the median voter's point of view, excessive utility and energy bills may strengthen the incentives for governments and politicians to suppress rate increases, leading to lower profitability and higher debt for public enterprises.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.1 no.2
• /
• pp.79-89
• /
• 1997

The objective of this paper is to investigate the mechanical characteristics of the laminated rubber bearings (LRBs) for the seismic isolation. The evaluations of the proposed equations of the LRB horizontal stiffness are carried out and these equations are extended to the visco-elastic problems to investigate the damping amplifications of LRBs. The stability evaluation of LRBs is also performed. For investigation of the dynamic characteristics of LRBs, the horizontal stiffness equations of the LRBs considering the P-delta effects are applied to the modeling of a seismically isolated structure and the earthquake response time history analyses are carried out. From this research, the proposed simple equation of the horizontal stiffness of LRB is so useful for the design loads and easily extended to the visco-elastic problems. Through the stability evaluation of LRB, the increasing ratio of the total rubber thickness of the LRB severely decrecises the bucking load than the increasing ratio of unit rubber thickness. From the comparison of the dynamic shear deflection of LRB, the analysis results are in good agreement with those of the experiments.