• 한국재료학회지
• /
• 제11권12호
• /
• pp.1035-1041
• /
• 2001

The refining process and solubility of Ti in Al matrix during mechanical alloying (MA) were investigated by using X-ray diffraction (XRD), transmission electron microscopy (TEM) as functions of alloy composition, milling time and ball to powder ratio (BPR). Mechanical alloyed samples were annealed for investigating their stability and the formation behavior of$Al_3Ti$in the temperature range from$200{\circ}C$to$600{\circ}C$. It is observed from present experimental that disappearance of Ti peaks in mechanically alloyed Al-10wt%Ti is not simply attributable to the dissolution of Ti into Al, but associated mainly with extreme refining and/or heavy straining of Ti particles The annealing of the mechanically alloyed Al-Ti powders show differences in aluminide formation behavior when Ti content in Al is equal to or less than l0wt% and higher than l5wt%Ti. When Ti-content in Al is equal to or less than l0wt%, the MA powders transform directly to a global equilibrium state forming $DO_{22}- type\;Al_3$Ti above$400{\circ}C$. In the Al-Ti samples with equal to or higher than l5wt%Ti, transitional phases of cubic$Al_3Ti$and tetragonal $Al_{24}Ti_8$ are formed above$400{\circ}C$. They are stable only below$500{\circ}C$, and, $DO_{22}-type\;Al_3Ti$ becomes dominant aluminide at temperature higher than$ 600{\circ}C$.

• 한국광물학회지
• /
• 제1권2호
• /
• pp.94-103
• /
• 1988

YAG (Yttrium Aluminum Garnet) 레이저와 다이아몬드앤빌셀 (DAC)을 이용하여 페롭스카이트 구조물질중 $BaTiO_3$와 $PbTiO_3$에 대한 상(相)전이와 $MgSiO_3$와 $(Mg_{0.87},\;Fe_{0.13})SiO_3$ 성분(成分)의 사방휘석으로부터 규산염 페롭스카이트를 합성하였다. $BaTiO_3$와 $PbTiO_3$는 실온의 2.6 GPa와 4.0 GPa에서 각각 정방정계에서 등축정계로 상(相)전이하며 고온, 고압하에서 매우 넓은 안정영역을 갖고 있다. $MgSiO_3$ 엔스테타이트를 출발물질로 하였을 경우 약 33 GPa, $1,000^{\circ}C$의 조건하에서 페롭스카이트가 주성분인데, 일메나이트, 감마스피넬, 스티쇼마이트도 부성분으로 나타난다. $(Mg_{0.87},\;Fe_{0.13})SiO_3$의 경우는 약 35 GPa와 $1,000^{\circ}C$에서 페롭스카이트상(相)이 주성분으로 나타나며, 베타스피넬, 스티쇼바이트와 본래 엔스테타이트상(相)도 유지되나, 일메나이트상(相)과 감마스피넬은 나타나지 않는다.

• Bulletin of the Korean Chemical Society
• /
• 제27권12호
• /
• pp.1989-1996
• /
• 2006

The $NiSO_4/CeO_2-ZrO_2 $catalysts containing different nickel sulfate and $CeO_2$ contents were prepared by the impregnation method, where support, $CeO_2-ZrO_2$was prepared by the coprecipitation method using a mixed aqueous solution of zirconium oxychloride and cerium nitrate solution followed by adding an aqueous ammonia solution. No diffraction line of nickel sulfate was observed up to 20 wt %, indicating good dispersion of nickel sulfate on the surface of $CeO_2-ZrO_2$. The addition of nickel sulfate (or $CeO_2$) to $ZrO_2$ shifted the phase transition of $ZrO_2$ from amorphous to tetragonal to higher temperatures because of the interaction between nickel sulfate (or $CeO_2$) and $ZrO_2$. A catalyst (10-$NiSO_4/1-CeO_2-ZrO_2$) containing 10 wt % $NiSO_4$ and 1 mole % $CeO_2$, and calcined at $600{^{\circ}C}$ exhibited a maximum catalytic activity for ethylene dimerization. The catalytic activities were correlated with the acidity of catalysts measured by the ammonia chemisorption method. The role of $CeO_2$was to form a thermally stable solid solution with zirconia and consequently to give high surface area, thermal stability and acidity of the sample.