• Textile Coloration and Finishing
• /
• v.30 no.3
• /
• pp.180-189
• /
• 2018

To study the effect of stereoisomeric structures of curing agents on curing behaviors, thermal and mechanical properties of epoxy resins, DGEBA(diglycidyl ether of bisphenol A) epoxy resin and 3,3'- and 4,4'-DDS(diaminodiphenyl sulfone) curing agents were selected. The curing initiation temperature and activation energy of DGEBA/3,3'-DDS was lower than DGEBA/4,4'-DDS. DGEBA/3,3'-DDS has a faster curing rate and higher degree of cure than DGEBA/4,4'-DDS, suggesting that 3,3'-DDS has higher reactivity than 4,4'-DDS. Tensile strength and fracture toughness of DGEBA/3,3'-DDS was lower than those of DGEBA/4,4'-DDS, indicating that mechanical properties of the epoxy resin can be different only by the stereoisomeric difference in chemical structure of the curing agent.

• Journal of the Korean Ceramic Society
• /
• v.41 no.3
• /
• pp.242-246
• /
• 2004

Nano-sized a-alumina with a narrow distribution was prepared by using Flame Spray Pyrolysis (FSP). The microemulsion of water in oil (W/O) was prepared to make ultrafine droplets for FSP process. Kerosene (fuel) as a continuos phase and Al(NO$_3$)$_3$$.$9$H_2O$ (oxidizer) aqueous solution as a dispersed phase were prepared for microemulsification. The microemulsion with dispersion stability was obtained by adjusting the composition of 80 vol% kerosene, 10 vol% aqueous solution, and 10 vol% emulsifying agent. Microemulsion was sprayed onto the flame by using two-fluid nozzle spray gun under the condition of 0.03 ㎫ air pressure. The synthesized products were $\alpha$-alumina phase with the size of 20 to 30 nm.

• Membrane and Water Treatment
• /
• v.4 no.4
• /
• pp.277-291
• /
• 2013

The transport and recovery of Levafix brilliant red E-4BA and Levafix brilliant red E-6BA were investigated using polytetrafluoroethylene (PTFE) fiber based supported liquid membrane containing tetra butyl ammonium bromide (TBAB) in coconut oil as a carrier. The influencing parameters studied are: pH of the feed solution, concentration of dye in the feed solution, extractant concentration, and various kind of stripping agent, rate of stirring, time of transport, reusability of membrane and stability of membrane. Increase in TBAB concentration inside the membrane enhances the flux with its maximum value at $1.553{\times}10^{-4}$ M TBAB. Further increase in the concentration of TBAB leads to decreased rate of transport due to increase in viscosity of membrane liquid. The optimum conditions for dye transport are: pH of feed ($7{\pm}0.1$), $1.553{\times}10^{-4}$ M extractant concentration, 350 rpm for stirring, $4.9{\times}10^{-1}$ M potassium hydrogen phthalate as a stripping solution, the time of transport 6 h. It was noticed that flux values were increased with increasing dye concentration in the feed phase. Applying this study to textile wastewater, dyes were transported up to 98% in 6 h. This recovery technique is rewarding to environment and economic.

• Journal of Yeungnam Medical Science
• /
• v.11 no.1
• /
• pp.30-34
• /
• 1994

Local anesthetics produce pain during infiltration into skin. The relationship between local anesthetic-induced pain and pH of the local anesthetic solution has not been fully investigated. Commercial preparation of local anesthetics are prepared as acidic solutions of the salts to promote solubility and stability. And the acidity of local anesthetic solition may be related with the pain during infiltration of the solutione. So, we tried to neutralize the lidocaine hydrochloride solution which is one of the most frequently used local anesthetic agent. Sodium bicarbonate was used for neutralization. Sodium bicarbonate was mixed with lidocaine hydrochloride until the resulting pH of the solution become 7.4 which is identical to the acidity of body fluid. To identify the effect of neutralized lidocaine solution, we had a course of double blind test to 6 volunteers. Both forearm of each volunteer were injected with neutralized lidocaine and plain one, and the degree of pain was estimated by each volunteers. According to subjective description by the volinteers, everyone felt neutralized lidocaine injection site was less painful than plain lidocaine. We concluded that we could reduce pain from infiltration of lidocaine hydrochloride by neutralization of the anesthetic solution with sodium bicarbonate.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.1
• /
• pp.53-59
• /
• 1997

Spin finish(NSFs) for synthetic fiber were prepared. NSF-3 was proved to be the best spin finish by testing the properties and emulsion stability, etc. of NSFs. NSF-3 prepared by blending of spindle oil 70g, paraffin wax 10g, glyceryl mono-oleate 5g, POE(10) nonylphenyl ether 4g, POE(20) sorbitan tri-oleate 4g, Na-dioctyl sulfosuccinate 4g, antistatic agent 2g and water 1g was excellent in its characteristics. Optimum physical conditions of nylon filament treated with NSF-3 according to the number of revolution of oil roller were obtained at conditions of 5.5rpm in the number of revolution of oil roller, 1.21% of oil pick up, and denier 69.2D.

• Macromolecular Research
• /
• v.13 no.3
• /
• pp.223-228
• /
• 2005

In the present work, a low-density polyethylene (LDPE) composite, filled with Zn-ion coated structural silica encapsulated with the diglycidyl ether of bisphenol-A (DGEBA), was synthesized using the conventional melt-blending technique in a sigma internal mixer. The catalytic activity of the Zn-ions (originating from the structural silica) towards the oxirane group (diglycidyl ether of bisphenol-A (DGEBA): encapsulating agent) was assessed by infrared spectroscopy. Two composites, each with a filler content of $2.5 wt\%$ were developed. The first one was obtained by melt blending the Zn-ion coated structural silica with LDPE in a co-rotating sigma internal mixer. The second one was obtained by melt blending the same LDPE, but with DGEBA encapsulated Zn-ion coated structural silica. Epoxy resin encapsulation of the Zn-ion coated structural silica resulted in its having good interfacial adhesion and a homogeneous dispersion in the polymer matrix. Furthermore, the encapsulation of epoxy resin over the Zn-ion coated structural silica showed improvements in both the mechanical and thermal properties, viz. a $33\%$ increase in the elastic modulus and a rise in the onset degradation temperature from 355 to $371^{\circ}C$, in comparison to the Zn-ion coated structural silica.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5B
• /
• pp.405-412
• /
• 2006

In this paper, we present an efficient method for simulating massively virtual clients in an online game environment. Massively multi-player online games and other multi-user based networked applications are becoming more attractive to the gamer players. Such kind of technology has long been researched in the area called Networked Virtual Environments. In the game development process, a set of beta tests is used to ensure the stability of online game servers. A set of testing processes consumesa lot of development resources such as cost, time, and etc. The purpose of VENUS system is to provide an automated beta test environment to the game developers to efficiently test the online games to reduce development resources.

• Resources Recycling
• /
• v.27 no.3
• /
• pp.3-7
• /
• 2018

Development of extractive metallurgical processes for metal sulfides has become of importance owing to the depletion of oxide ores with rich metal contents. Most of the leaching reactions of metal sulfides is electrochemical reaction and can be classified as $H_2S$, S, and ${SO_4}^{2-}$ evolution type. The acidity of leaching solution and the presence and concentration of an oxidizing agent affect the formation of reaction intermediates containing sulfur. Frost diagram of sulfuroxoanion indicates that the oxoanions with higher oxidation number are more thermodynamically stable in the presence of oxidizing agents.

• Journal of the Korean Applied Science and Technology
• /
• v.3 no.1
• /
• pp.65-71
• /
• 1986

Four amphoteric surfactants, 1-(N-alkyl-N,N-dimethyl ammonio)-4-naphthalene sulfonates, were prepared by the alkylation of 1-(N,N-dimethylamino)-4,naphthalene sulfonic acid with chloroalkanes such as 1-decylchloride, 1-tetradecyl chloride and 1-hexadecyl chloride. These quaternary ammonium compounds such as 1-(N-decyl-N, N-dimethylammonio)-4-naphthalene sulfonate, 1-(N-dodecyl-N,N-dimethylammonio)-4-naphthalene sulfonate, 1-(N-tetradecyl-N,N-dimethylammonio)-4-naphthalene sulfonate and 1-(N-hexadecyl-N,N-dimethylammonio)-4-naphthalene sulfonate could be separated by means of thin layes chromatography and column chromatography. The surface chemical properties such as surface tension, foaming power, foam stability, wetting efficiency and solubilizing effect for these four compounds were measured. Also critical micelle concentration and hydrophilic-lipophilic balance(HLB) were evaluated. These compounds showed good surface as O/W type emulsifying agent and detergent.

• Journal of the Korean Applied Science and Technology
• /
• v.3 no.1
• /
• pp.57-64
• /
• 1986

1-(carboxyalkyl) trimethyl ammonium chlorides such as 1-(carboxyundecyl) trimethyl ammonium chloride and 1-(carboxytridecyl) trimethyiammonium chloride were synthesized by the reaction of ${\alpha}-bromoalkanoic$ acid with trimethyl amine hydrochloride. In other hand, (carboxymethyl) alkyl dimethyl ammonium chlorides such as (carboxymethyl) dodecyl dimethyl ammonium chloride and (carboxymethyl) tetradecyl dimethyl ammonium chloride were synthesized by the reaction of alkyl dimethylamine with sodium chloroacetate. The four kinds of alky carboxy betaine such as 2-(trimethylammonio) dodecanoate, 2-(trimethyl ammonio) tetradecanoate, (dodecyl dimethylammonio) ethanoate and (tetradecyl dimethyl ammonio) ethanoate were prepared from 1-(carboxyalkyl) trimethyl ammonium chlorides or (carboxymethy1) alkyl dimethyl ammonium chlorides. The surface activities including surface tension, emulsifying power, foaming power, foam stability, deflocculating effect, effectiveness of wettability and solubilizing effect were measured and also critical micelle concentration and hydrophilic-lipophilic. balance(HLB) were evaluated. These carboxy betaines show good surface activities as O/W type emulsifing agent and detergent.