• YAKHAK HOEJI
• /
• v.44 no.3
• /
• pp.251-256
• /
• 2000

Sterically stabilized liposomes (SSL) composed of distearoylphosphatidylcholine, cholesterol, dicetylphosphate and distearoylphosphatiodylethanolamine-N-poly(ethyleneglycol) 2000 (DSPE-PEG 2000) were made by reverse phase evaporation method to prolong biological half-life and decrease toxic side effect of drug. Streptozocin (572), a water-soluble antitumor agent with short half-life, was selected as a model drug. The size of SSL was controlled by polycarbonate extrusion to 100 nm which is adequate size for long circulation in plasma. The release rate of drugs from SSL in PBS was evaluated. And the stability of STZ-containing liposomes against drug leakage into rat plasma was evaluated in order to investigate the interaction of liposome and plasma protein. Incorporation of DSPE-PEG 2000 into conventional liposomes significantly decreased the drug leakage into rat plasma.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.4
• /
• pp.317-323
• /
• 2003

The effect of additives such as complexing agents, stabilzers and boric acid on the bath stability and the deposition rate of electroless black Ni-Zn plating has been examined. The deposits obtained became black and showed an amorphous structure. The significant increasing in the deposition rate was not found when only glycine and citric acid were used as complexing agents. The deposition rate increased up to 3 and 4 times by adding malic acid and glycolic acid as an additional complexing agent, respectively. The stabilizers and the boric acid, however, had little influence on the deposition rate.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.215.3-216
• /
• 2003

Eupatilin is a major active component of Stillen\ulcorner(Artemisia Herba Extract) having a potent antigastritic effect. We investigated the physical properties of eupatilin using high performance liquid chromatography. Solubility, stability & partition coefficient of eupatilin were investigated. pH-stability of eupatilin was examined over the broad range through pH1-9 at 37$^{\circ}C$ & it has good stability above the broad range pH. The solubility of eupatilin was extremely low but the value of logP was more than 2. Also, a high performance liquid chromatographic method was developed for the determination of eupatilin in rat plasma. (omitted)

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.277.1-277.1
• /
• 2002

The purpose of this study was to develop PEl-based gene carriers with optimal serum stability and reduced cytotoxicity. PEl is an efficient gene transfer agent with the ability of DNA condensation and endosome escape: however; use of the polymer in vivo is hampered by signigicant reduction in transfection activity by the presence of serum. Chitosan is a non-toxic. biodegradable and biocompatible polymer with hydrophilic functional groups so it may provide a physical stability against challenge by serum proteins. (omitted)

• Korean Journal of Microbiology
• /
• v.20 no.1
• /
• pp.11-20
• /
• 1982

A study was undertaken to examine the effect of curing agents on the stability, curing and segregation of R plasmid pSL100. And also the stability, transfer frequency, and recombination of its segregants obtained from curing agent treatment were studied. Ethidium bromide, acridine orange, and mitomycin-C were used as curing agent. The results obtained were as follows ; 1. The curing agent ethidium bromide, acridine orange, and mitomycin-C were not effective for curing the multiple antibiotic resistant determinant of pSL100 in Salmonella typhimurium and Escherichia coli. However, they induced plasmid segregation with high frequency in S.typhimuruim LT-2strains. TcApSmCm, TcSmCmKm, TcApCm, TcAp, TcKm, Tc segregants were obtained. 2. The resistant markers of the segregents were transferred to S.typhimurium LT-2 strains with high frequencies whereas they were transferred to E.coli K-12 only with low frequencies. 3. The transconjugants obtained from conjugation between two different S.typhimurium segregants were similar to the phenotype of the original R factor pSL100 and the resistant markers were transferred to the S.typhimurium LT-2 or E.coli strain with equal frequencies, indicating that they are recombinants. 4. The transconjugants obtained from conjugation between pSL100 segrgants and pKM101, or pBR322 possessed the resistant markers of the two parental plasmids and they were transferred to both S.typhimurium and E.coli K-12 strains with the same frequencies and maintained stably, suggesting that they are also recombinants. 5. The recombinant pSL100 could be also obtained in rec A-strains of E.coli, suggesting that the gene function of rec A is required for the recombination of pSL100 segregants in E.coli.

• Fire Science and Engineering
• /
• v.33 no.5
• /
• pp.19-27
• /
• 2019

Fire extinguishing composite materials based on low-viscosity epoxy resin (EP) and containing 50 wt% of encapsulated fire extinguishing agent (EFA) have been studied. The positive effect of the EP on the kinetics and temperature of the EFA decapsulation was established. The EP increases the decapsulation temperature of the EFA from 130 ℃ to 155 ℃ and changes the kinetics of the decapsulation. The epoxy matrix increases the thermal stability of the EFA more than 3.9 times compared to that of the pure EFA. The protective effect of the EP on the storage stability of the EFA was validated. The mass loss of EP-containing EFA at 60 ℃ and 80% humidity over 96 h is 0.4%. The mass loss of pure EFA under the same conditions is 15%. A similar effect was observed under ultraviolet radiation: the EP-containing EFA loses 0.8% at pure EFA mass of 6%. The testing of alternative polymer matrixes has been considered.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.58-65
• /
• 1998

Substituted dicyandiamide(Sub-DICY), Accelerated dicyandiamide(Acc-DICY), Trimellitic anhydride(TMA), Pyromellitic dianhydride(PMDA) and Phenolic curing agent(Ph.C.A.) are mainly used for epoxy powder coating curing agent. Various characteristics of epoxy films fully cured by optimum condition such as mechanical properties like $T_g$, tensile strength, elongation at break hardness, abrasion resistance and chemical properties like water absorption, acid resistance, alkali resistance and electrical properties, corrosion resistance are determined by various measuring devices and analyses devices. In conclusion, phenolic curing agent was shown excellent thoughness but severe color change as temperature increased. Acid anhydride has excellent insulation properties and color stability at elevated temperature but lower thoughness and adhesion to substrate. DICY curing agent was shown high water absorption and severe color chance as temperature increased.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.458-464
• /
• 2008

A successful scaffold should have a highly porous structure and good mechanical stability. High porosity and appropriate pore size provide structural matrix for initial cell attachment and proliferation enabling the exchange of nutrients between the scaffold and environment. In this paper the highly porous scaffold of poly(${\varepsilon}$-caprolactone) electrospun nanofibers could be manufactured with an auxiliary electrode and chemical blowing agent (BA) under several processing conditions, such as the concentration of PCL solution, weight percent of a chemical blowing agent, and decomposition time of a chemical blowing agent. To attain stable electrospinnability and blown nanofiber mats having high microporosity and large pore, a processing condition, 8wt% of PCL solution and 0.5wt% of a chemical blowing agent under $100^{\circ}C$ and decomposition time of $2{\sim}3\;s$, was used. The growth characteristic of human dermal fibroblasts cells cultured in the mats showed the good adhesion and proliferation on the blown mat compared to a normal electrospun mat.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.610-613
• /
• 2012

In this study, plant extracts including 25% Saururus chinensis, 20% Morus bombycis stem and 20% Morus papyrifera stem were tested to use as possible cosmetic agent. As cosmetic effect test, cell toxicity test, elastase inhibition assay, tyrosinase inhibition assay, anti-oxidation assay and temperature stability test were done as cosmetic assays. Plant extract showed low cell toxicity, excellent elastase inhibition and anti-oxidation effect, however, tyrosinase inhibition effect was lower. Skin, lotion and essence formulation was made using plant extracts and temperature stability test was done. Skin and essence indicated good stability, however, lotion showed phase separation and severe viscosity variation, which means lotion formulation change. From the research, plant extracts including Saururus chinensis, Morus bombycis stem and Morus papyrifera stem were suitable for possible cosmetic agent.

• Elastomers and Composites
• /
• v.37 no.1
• /
• pp.31-38
• /
• 2002

Polymerization of carboxylated styrene-butadiene latex takes longer time than that of acrylic emulsion due to delocalization of radical in butadiene unit having conjugated double bond. A latex stability is the most important properties owing to use intact without separating polymer from base latex. For reducing polymerization time without decreasing any properties of latex, carbon tetra-chloride which has been used as the most popular chain transfer agent was replaced to combination of tert-dodecylmercaptane and ${\alpha}$-methylstyrene dimer. The replacement yielded reducement or 2 hr in polymerization time. In the increment step, charge amount of acrylic acid was limited to 0.3 part to restrain viscosity enhancement. Just after initial step, addition of 0.1 part acrylamide prevent polymer chain from diffusing between two region followed by giving hardness and final good adhesive force to latex particles.