• Title/Summary/Keyword: Sr isotope

Search Result 72, Processing Time 0.021 seconds

Sr Isotopic Composition of Apatite from the Yeongju and Andong Granites: Isotopic Distinction between the Two Granites and Location of the Boundary (영주화강암과 안동 화강암의 인회석 Sr 동위원소 조성: 두 암체의 동위원소적 구분과 경계의 위치)

  • Yoon, Rina;Lee, Seung-Gu;Park, Kye-Hun;Song, Yong-Sun
    • The Journal of the Petrological Society of Korea
    • /
    • v.25 no.1
    • /
    • pp.89-93
    • /
    • 2016
  • Yeongju and Andong granites, located in the northeastern Yeongnam massif, reveal very similar emplacement ages but distinct initial isotopic compositions of strontium. However, previous studies used different boundaries to distinguish these batholiths. In this study, we determined Sr isotopic compositions of apatite separated from the granites of the area to find out the proper boundary and propose the location of such boundary based upon analysis.

Rb-Sr Isotopic Composition of Mesozoic Sancheong Syenite and Its Geologic Implication (중생대 산청섬장암의 Rb-Sr 조성과 의미)

  • Park Kye-Hun;Kim Dong-Yeon;Song Yong-Sun;Cheong Chang-Sik
    • The Journal of the Petrological Society of Korea
    • /
    • v.15 no.1 s.43
    • /
    • pp.1-9
    • /
    • 2006
  • Sr isotopic compositions are determined from the syenite of Sancheong area, yielding age of $211{\pm}23(2\sigma)$ Ma and $^{87}Sr/^{86}Sr$ initial ratio of $0.70598{\pm}0.00060$. Such result confirms that Sancheong syenite was emplaced during the Mesozoic around the Triassic-Jurassic boundary. Rather low initial $^{87}Sr/^{86}Sr$ ratio suggests insignificant influence of old crustal materials. There are strong contrast in rock types of plutonic associations between Sancheong-Macheon area and adjacent Hamyang-Geochang area to the north, i.e. syenite-diorite-gabbro and granite-granodiorite respectively. $^{87}Sr/^{86}Sr$ initial ratios also show distinction between these areas. Such differences suggest regional contrast in tectonic environments between them.

Rb-Sr Isotopic Ages of Biotite in the Weathering Profile of Granodiorite, Yecheon (예천지역 화강섬록암 풍화대내 흑운모의 Rb-Sr 동위원소연대 변화)

  • Jeong Gi Young;Cheong Chang-Sik;Lee Bong Ho
    • Journal of the Mineralogical Society of Korea
    • /
    • v.18 no.1
    • /
    • pp.53-59
    • /
    • 2005
  • Rb-Sr isotopic ages of oxidized biotite in the weathering profile of granodiorite, Yecheon area, were measured by thermal ionization mass spectrometry, and compared with their K-Ar ages. A decrease of Rb-Sr isotopic age is well correlated with iron oxidation, and consistent with K-Ar age. Octahedral and interlayer cations including Rb and Sr were partly released from the oxidizing biotite by excess positive charge from iron oxidation. Divalent /sup 87/Sr decayed from monovalent /sup 87/Rb was more easily released from biotite, resulting in the reduction of Rb-Sr isotopic age. Weathered biotite is not suitable for the age dating of parent rocks, but behaviour of radiogenic isotopes provides useful information on the geochemical and structural changes of biotite during weathering.

Sr, Nd and Pb isotopic investigations of ultramafic xenoliths and their host basalts from Jeju Island, Baekryeong Island, Boeun and Ganseong, Korea: Implications for a large-scale difference in the source mantle beneath East Asia

  • Park, Seong-Hee;Kwon, Sung-Tack;Hee Sagong;Cheong, Chang-Sik
    • Proceedings of the Mineralogical Society of Korea Conference
    • /
    • 2001.06a
    • /
    • pp.75-75
    • /
    • 2001
  • We report Sr, Nd and Pb isotope data of clinopyroxene separates from ultramafic xenoliths and their host basaltic rocks in Jeju Island, Baekryeong Island, Boeun and Ganseong, Korea. The isotopic data of the xenoliths and host basalts are distinctly different from those of Korean basement rocks. Except for two xenoliths from Ganseong, all samples in this study have isotopic ratios within the combined range of MORB-OIB data. All basaltic rocks have Nd-Sr-Pb isotope compositions different from those of xenoliths, indicating that the host basaltic magma did not derive from the lithospheric mantle where the xenoliths originated. The range of isotopic composition of xenoliths is much greater than that observed in host basalts, which reflects small-scale heterogeneity of the lithospheric mantle. The greater isotopic heterogeneity of the lithospheric mantle probably reflects its long-term stability. The spinel peridotite xenolith data of Jeju Island, Baekryeong Island and Boeun display mixing hyperbolas between DMM and EM II end members. Since Jeju basalts have EM II-like isotopic signature, the mixing relationship shown by the isotopic data of the Jeju xenoliths can be interpreted as the result of infiltration of metasomatic fluid or melt derived from basaltic magma into DMM-like lithospheric mantle. In contrast to other xenolith sites, the Ganseong xenoliths are dominantly clinopyroxene megacryst and pyroxenite. Clinopyroxene megacrysts have different isotopic ratios from their host basalt, reflecting its exotic origin. Two Ganseong xenoliths (wherlite and clinopyroxenite) have much enriched Sr and Nd isotopic ratios and Nd model ages of 2.5-2.9 Ga, and plot in an array away from the MORB-OIB field. The mantle xenoliths from Korean Peninsula have similar $\^$87/Sr/$\^$86/Sr,$\^$143/Nd/$\^$144/Nd and $\^$207/Pb/$\^$204/Pb ratios to, but higher $\^$208/Pb/$\^$204/Pb ratios than, those from eastern China, indicating that Korean xenoliths are derived from the lithospheric mantle with higher Th/U ratio compared with Chinese ones. The isotopic data of xenolith-bearing basalts of Baekryeong Island and Ganseong, along with Ulreung and Dok Islands, show a mixing trend betlveen DMM and EM I in Sr-Nd-Pb isotopic correlation diagrams, which is also observed in tile northeastern Chinese basalts. However, the Jeju volcanic rocks show an EM II signature that is observed in southeastern Chinese basalts. The isotopic variations in volcanic rocks from the northern and southern portions of the East Asia reflect a large-scale isotopic heterogeneity in their source mantle.

  • PDF

Nd and Sr Isotopes and K-Ar Ages of the Granitic and Rhyolitic Rocks from the Bupyeong Silver Mine Area (부평 은광산 지역의 유문암질암의 화강암류의 K-Ar연령과 Nd, Sr 동위원소)

  • Kim, Kyu Han;Tanaka, Tsuyoshi;Nagao, Keisuke
    • Economic and Environmental Geology
    • /
    • v.31 no.2
    • /
    • pp.149-158
    • /
    • 1998
  • Volcanic rocks including rhyolitic tuff, rhyolite and welded tuff in the Bupyeong silver mine area form a topographic circular structure known as a resurgent caldera. Granitic rocks are emplaced inside and outside area of the circular structure. K-Ar dating and Nd-Sr isotope studies were carried out to invesitigate the origin and petrogenetic evolution of the rhyolitic and granitic magma in the Bupeong silver mine area. Whole rock K-Ar age ranges from 208 to 131 Ma for rhyolitic rocks. Radiometric ages for the granitic rocks are 167.6 Ma for pink feldspar biotite granite from inside granitic pluton of the circular volcanic body, 178.8 Ma for the Kimpo hornblende biotite granite and 111.8 Ma for the Songdo foliated granite from outside granitic plutons of the volcanic body. The radiometric age data indicates that the volcanic activities which are partly overlapped by granite plutonic activities in the Bupyeong mine area had recorded early Jurassic and early Cretaceous in age. Initial Sr and Nd isotopic ratios of the rhyolitic rocks ($^{87}Sr/^{86}Sr$=0.710~0.719 and $^{143}Nd/^{144}Nd$=0.5115~0.5118) are similar to those of granitic rocks ($^{87}Sr/^{86}Sr$=0.709~0.716 and $^{143}Nd/^{144}Nd$=0.5115~0.5116) from inside granite stock. This means that similar source materials of felsic magma responsibles for the Bupyeong volcanic rocks and inside plutonic rocks. Based on the Nd and Sr isotopic compositions, rhyolitic and granitic magmas in the Bupyeong area originated from the partial melting of the old continental crust which has Nd model age ranging from 1500 to 2900 Ma. This is analogous to those of the other Jurassic granitoids in South Korea.

  • PDF

Geochemistry and Sm-Nd isotope systematics of Precambrian granitic gneiss and amphibolite core at the Muju area, middle Yeongnam Massif (영남육괴 중부 무주 지역에 위치하는 선캠브리아기 화강편마암 및 앰피볼라이트 시추코아의 Sm-Nd 연대 및 지구화학적 특징)

  • Lee Seung-Gu;Kim Yongje;Kim Kun-Han
    • The Journal of the Petrological Society of Korea
    • /
    • v.14 no.3 s.41
    • /
    • pp.127-140
    • /
    • 2005
  • The Samyuri area of Jeoksang-myeon, Muju-gun at the Middle Yeongnam Massif consists of granitic gneiss, porphyroblastic gneiss and leucocratic gneiss, which correspond to Precambrian Wonnam Series. Here we discuss a geochemical implication of the data based on major element composition, trace element, rare earth element (REE), Sm-Nd and Rb-Sr isotope systematics of the boring cores in the granite gneiss area. The boring cores are granitic gneiss (including biotite gneiss) and amphibolite. The major and trace element compositions of granitic gneiss and amphibolite suggest that the protolith belongs to TTG (Tonalite-Trondhjemite-Granodiorite) and tholeiitic series, respectively. Chondrte-normalized REE patterns vary in LREE, HREE and Eu anomalies. The granitic gneiss and amphibolite have Sm-Nd whole rock age of $2,026{\pm}230(2{\sigma})$ Ma with an initial Nd isotopic ratio of $0.50979{\pm}0.00028(2{\sigma})$ (initial ${\epsilon}_{Nd}=-4.4$), which suggests that the source material was derived from old crustal material. Particularly, this initial ${\epsilon}$ Nd value belongs to the range of the geochemical evolution of Archean basement in North-China Craton, and also corresponds to the initial Nd isotope evolution line by Lee et al. (2005). In addition, chondrite-normalized REE pattern and initial Nd value of amphibolite are very similar to those of juvenile magma in crustal formation process.

Geochemical Application for Clarifying the Source Material of the Earthenware: A Preliminary Study for Archaeological Application of Geochemical Tool (도토기의 태토(기원물질)산지를 추적하기 위한 지구화학적 응용연구: 지구화학연구기법의 고고학적 응용을 위한 기초연구)

  • Lee, Seung-Gu;Lee, Kil-Yong;Yoon, Yoon-Yeol;Yang, Myeong-Kwon;Kim, Kyu-Ho;Lee, Sung-Joo;Ahn, Sang-Doo
    • The Journal of the Petrological Society of Korea
    • /
    • v.19 no.3
    • /
    • pp.181-197
    • /
    • 2010
  • This study is for finding a geoscientific factor for clarifying the source soil of the ancient earthenware finding. The used samples were the earthenware, soil and rocks, which were collected at the Gyeongju, Gyeongsan and Haman area. The chemical and mineralogical study for the samples were carried out for understanding the change of mineralogical and chemical composition among them. The mineralogical compositions of the earthenware are different from those of the soils from the surrounding area, which suggests that the mineralogical approach for clarifying the source soil of the earthenware should be difficult. Major element compositions of the earthenware also are different from those of the surrounding soils, which suggests that the comparison of the chemical composition using the major elements might be difficult for deducing the source soil of the earthenware. However, PAAS-normalized rare earth element (REE) patterns and Nd model ages among the rock, soils and earthenware from the same sampling sites show similar characteristics one another compared to those of the major element compositions. Nd-Sr isotopic systematics among the earthenware, soils and rocks also show a close relationship. Our results suggest that REE and Nd-Sr isotope geochemistry might be more useful than the other geochemical technique in clarifying the source soils of the ancient earthenware.

Source Identification for Asian Dust Deposited on Domestic Area Using Sr-Nd Isotope Ratios in Spring, 2007 (Sr-Nd 동위원소를 이용한 국내 퇴적황사의 발원지 규명: 2007년 봄철 황사)

  • Youm, Seung-Jun;Lee, Pyeong-Koo
    • Economic and Environmental Geology
    • /
    • v.41 no.3
    • /
    • pp.315-326
    • /
    • 2008
  • Recently, the occurrence and intensity of Asian Dust have dramatically increased in Korean peninsula, resulting in severe damages to the domestic social and economic field. The most useful way to prevent the damage of Asian Dust is the restraint of the occurrence of Asian Dust itself. However, Asian dust is the one of the natural phenomena, thus there is a basic limit to manage the Asian Dust. Though it is impossible to restrain the occurrence of Asian Dust in short time at present, it is a urgent matter to minimize the damage of Asian Dust. It is necessary to construct the basic data for understanding the harmfulness of Asian Dust, and to elucidate the source area of Asian Dust in connection with the maleficence of itself. In this study, the source area of Asian Dust in spring, 2007, is investigated using the Sr-Nd isotopic ratios which is the most common method to trace the source of geological materials. The relationships of Sr-Nd isotope ratios indicate that Asian Dust was originated from Central Loess Plateau and/or Ordos desert in spring, 2007.

Design and fabrication of beam dumps at the µSR facility of RAON for high-energy proton absorption

  • Jae Chang Kim;Jae Young Jeong;Kihong Pak;Yong Hyun Kim;Junesic Park;Ju Hahn Lee;Yong Kyun Kim
    • Nuclear Engineering and Technology
    • /
    • v.55 no.10
    • /
    • pp.3692-3699
    • /
    • 2023
  • The Rare isotope Accelerator complex for ON-line experiments in Korea houses several accelerator complexes. Among them, the µSR facility will be initially equipped with a 600 MeV and 100 kW proton beam to generate surface muons, and will be upgraded to 400 kW with the same energy. Accelerated proton beams lose approximately 20% of the power at the target, and the remaining power is concentrated in the beam direction. Therefore, to ensure safe operation of the facility, concentrated protons must be distributed and absorbed at the beam dump. Additionally, effective dose levels must be lower than the legal standard, and the beam dumps used at 100 kW should be reused at 400 kW to minimize the generation of radioactive waste. In this study, we introduce a tailored method for designing beam dumps based on the characteristics of the µSR facility. To optimize the geometry, the absorbed power and effective dose were calculated using the MCNP6 code. The temperature and stress were determined using the ANSYS Mechanical code. Thus, the beam dump design consists of six structures when operated at 100 kW, and a 400 kW beam dump consisting of 24 structures was developed by reusing the 100 kW beam dump.