• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.09a
• /
• pp.464-465
• /
• 2000

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.142.1-142.1
• /
• 2008

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.12
• /
• pp.988-995
• /
• 2010

In this study the (Alnico, Sm-Co) bonded magnets were fabricated by mixing the Sm-Co added alnico alloy powders with epoxy resin and binder, appropriately. Also, the hybrid ring magnets of (Alnico, Sm-Co)/Sr-ferrite were fabricated by coupling the Sr-ferrite composite layer with an (Alnico, Sm-Co) magnet. The magnetic properties of (Alnico, Sm-Co) ring magnets were varied with the amount of Sm-Co powders. The addition of Sm-Co powders increased a remanent induction($B_r$) and coercive force($_BH_C$), while decreasing a surface flux density and repulsive distance. The surface flux density and repulsive distance for the (Alnico, Sm-Co) ring magnet increased with a magnetizing voltage up to about 160 V and reached an apparent saturation point. Also, the measurements of temperature and moisture characteristics showed that the surface flux densities of N-S poles and repulsive distance decreased a little within 4% after 10 days passed.

• Electrical & Electronic Materials
• /
• v.5 no.3
• /
• pp.329-336
• /
• 1992

본 논문은 이방성 Sr.페라이트의 자기특성의 개선에 관하여 연구한 것이다. 시편은 SrO.nFe$_{2}$O$_{3}$의 기본조성으로서 비화학양론적 영역인 n=5.9를 택하였다. 그리고 보자력을 증가시키기 위하여 기본첨가제로서 0.7wt% CaCO$_{3}$와 0.3% wt% SiO$_{2}$를 첨가하여 하소시킨 다음 $Na_{2}$SiO$_{3}$의 량을 변화시키면서 복합첨가하였다. 한편, 위의 시료(기본첨가제와 0.5wt% $Na_{2}$SiO$_{3}$)에 Cr$_{2}$O$_{3}$ 및 $Al_{2}$O$_{3}$를 단독 및 복합첨가한 결과, 0.5wt% $Al_{2}$O$_{3}$가 단독첨가되었을 경우, 좋은 자기특성을 나타내었다. 본 연구에서 시행한 복합첨가방식에 의한 Sr.페라이트의 자기특성의 조사를 통하여 등방성의 경우, 기본조성과 기본첨가제와 0.5wt% $Na_{2}$SiO$_{3}$와 0.5wt% $Al_{2}$O$_{3}$조성에서 (BH)$_{max}$=1.15MGOe, 그리고 이방성의 경우, (BH)$_{max}$=3.23MGOe를 얻었으며 시료를 이방성화하므로서 자기특성면에서 등방성인 경우의 2~3배의 개선효과를 얻었다. 그리고 소결온도는 1210.deg.C에서 가장 좋은 특성을 나타내었으며 큐리온도는 등방성의 경우 T$_{c}$=410~420.deg.C에서 이방성의 경우 T$_{c}$=439~445.deg.C로서 약 30.deg.C가 향상되었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.65-66
• /
• 1994

This paper describes study on the preparation of ferrite powder for bonded mallets. The specimen which has the basic composition of SrO$.$nF$_2$O$_3$ with n=5.9 is in nonstoichiomatric region. Calcination is performed under N$_2$ atmosphere 1175$^{\circ}C$, 1200$^{\circ}C$, 1225$^{\circ}C$, 1250$^{\circ}C$ and 1275$^{\circ}C$ respectively. Then, Cooling is carried out in the furnace. In order to increase coecivity and obtain uniform grain size, we add to the specimen 0.7wt%CaCO$_3$, 0.3wt % SiO$_2$, 0.5wt%Na$_2$SiO$_3$ and 0.5wr% Al$_2$O$_3$. Also, in order to increase milling effect, carbon coating on sample particles is tried. As the result, single magnetic domain partic1e with Size of 1$\mu\textrm{m}$ in obtained and magnetic properties are improved.

• Journal of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.445-451
• /
• 1989

A series of solid solutions with formula $Er_{1-x}Sr_xFeO_{3-y}, where x is from 0.0 to 1.0, has been synthesized by heating at $1200^{\circ}C$ for 24 hours. X-ray diffraction shows these samples to be orthorhombically distorted perovskites for compositions up to x = 0. 6 and apparantly simple cubic perovskite structures from $0.8{\leq}x{\leq}1.0$. Lattice volumes are increased with the introduction of Sr. The mixed valence state of two kinds of Fe ion in these ferrite systems is analyzed by the Mohr salt titration method. Mossbauer spectra measured at room temperature for x = 0.0 and 0.5 compositions shows hyperfine splitting for iron (III) due to magnetic ordering and indicates that these samples contain octahedrally and tetrahedrally coordinated iron sites. Electrical conductivity measurements indicate that conduction in these samples apparantly occurs over the octahedral sites by a hopping mechanism.

• Journal of the Korean Ceramic Society
• /
• v.45 no.12
• /
• pp.788-795
• /
• 2008

An electrolyte supported SOFC cell was tested at $800^{\circ}C$ in air for 3600 h with an applied current density of $200\;mA/cm^2$ to examine possible cathode degradation issues. A scandium- stabilized zirconia (ScSZ) with additional manganese doping (ScSZ: Mn) was used as electrolyte. A strontium and copper-doped lanthanum ferrite (LaSrCuFe) and platinum were used as cathode and quasi-anode material, respectively. The DC resistance was logged over the complete testing period. Additionally, impedance spectroscopy was used from time to time to track changes of the cell in-situ. Post-test analysis of the cell using methods like scanning electron microscopy imaging and other electrochemical testing methods allow the identification of different degradation sources. The results indicate a promising combination of electrolyte and cathode material in terms of chemical compatibility and electrical performance.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2013.12a
• /
• pp.135-135
• /
• 2013

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.119.1-119.1
• /
• 2008

• Journal of the Korean Ceramic Society
• /
• v.43 no.3 s.286
• /
• pp.162-168
• /
• 2006

The perovskites with nominal compositions $La_{0.8}Sr_{0.2}Fe_{1-x}M_xO_3$ (M=Co, Mn, Ni, x=0.1-0.3) were fabricated by a solid-state reaction method as cathode materials of low-temperature operating Solid Oxide Fuel Cells (SOFCs). X-ray diffraction analysis and microstructure observation for the sintered samples were performed. The ac complex impedance were measured in the temperature range $600-900^{\circ}C$ in air and fitted with a Solatron ZView program. The electrical conductivity and polarization resistance of $La_{0.8}Sr_{0.2}Fe_{1-x}M_xO_3$ (M=Co, Mn, Ni, x=0.1-0.3) were characterized systematically. The porosities of the sintered samples were in the range of 25% to 38%. The polarization resistance of $La_{0.8}Sr_{0.2}Fe_{0.7}M_{0.3}O_3$ was $0.291{\Omega}cm^2\;at\;700^{\circ}C$.