• Coupled systems mechanics
• /
• 제8권2호
• /
• pp.185-197
• /
• 2019

Considering the increasing use of tubular profiles in civil construction, this paper highlights the study on the behavior of welded connections between square hollow section column and I-beam, with emphasis on the assessment of the joint stiffness. Firstly, a theoretical analysis of the welded joints has been done focusing on prescriptions of the technical literature for the types of geometries mentioned. Then, a numerical analysis of the proposed joints were performed by the finite element method (FEM) with the software ANSYS 16.0. In this study, two models were evaluated for different parameters, such as the thickness of the cross section of the column and the sizes of cross section of the beams. The first model describes a connection in which one beam is connected to the column in a unique bending plane, while the second model describes a connection of two beams to the column in two bending planes. From the numerical results, the bending moment-rotation ($M-{\varphi}$) curve was plotted in order to determine the resistant bending moment and classify each connection according to its rotational capacity. Furthermore, an equation was established with the aim of estimating the rotational stiffness of welded I beam-to-RHS column connections, which can be used during the structure design. The results show that most of the connections are semi-rigid, highlighting the importance of considering the stiffness of the connections in the structure design.

• 대한토목학회논문집
• /
• 제29권1A호
• /
• pp.53-60
• /
• 2009

이 논문은 양단회전 후좌굴 변단면 기둥의 기하 비선형 해석에 관한 연구이다. 기둥의 변단면은 변화폭, 변화깊이, 정방형 변단면으로 채택하였다. Bernoulli-Euler 보 이론을 이용하여 후좌굴 기둥의 정확탄성곡선을 지배하는 미분방정식을 유도하였다. 이 미분방정식은 두 개의 미지수를 가지며 이러한 미분방정식을 풀 수 있는 수치해석 방법을 개발하였다. 후좌굴 기둥의 수치해석 결과로 평형경로, 정확탄성곡선 및 합응력을 산정하였다. 실험을 통하여 후좌굴 거동의 이론을 검증하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2402-2407
• /
• 2007

Heat transfer distributions and friction factors in square channels (3.5 ${\times}$ 3.5 cm) with twisted tape inserts and with twisted tape inserts plus interrupted ribs are respectively investigated. Tests are performed for Reynolds numbers ranging from 8,900 to 29,000. The rib height-to-channel hydraulic diameter, e/Dh, is kept at 0.057 and test section length-to-hydraulic diameter, L/Dh is 30. The twisted tape is 0.1 mm thick carbon steel sheet with diameter of 3.3cm, length of 90cm, and 2.5 turns. The square ribs are arranged to follow the trace of the twisted tape and along the flow direction defined as axial interrupted ribs. Each wall of the square channel is composed of isolated aluminum sections. The following conclusions from the experimental study were drawn as: 1) In the 4 heating wall channel with twisted tape inserts, Nusselt number based on bottom wall temperature is enhanced by 1.2 - 1.6 times if adding the axial interrupted ribs on the bottom wall only. 2) The twisted tape with interrupted ribs under the two-sided heating condition produces the highest heat transfer performance. 3) Friction factor data obtained for the square channel with twisted tape inserts plus axial interrupted ribs are less than those in the past publications for circular tubes with axial interrupted ribs and twisted tape inserts.

• Steel and Composite Structures
• /
• 제38권1호
• /
• pp.103-120
• /
• 2021

This research examines the eccentric compression performance of composite columns composed of recycled aggregate concrete (RAC)-filled square steel tube and profile steel. A total of 17 specimens on the composite columns with different recycled coarse aggregate (RCA) replacement percentage, RAC strength, width to thickness ratio of square steel tube, profile steel ratio, eccentricity and slenderness ratio were subjected to eccentric compression tests. The failure process and characteristic of specimens under eccentric compression loading were observed in detail. The load-lateral deflection curves, load-train curves and strain distribution on the cross section of the composite columns were also obtained and described on the basis of test data. Results corroborate that the failure characteristics and modes of the specimens with different design parameters were basically similar under eccentric compression loads. The compression side of square steel tube yields first, followed by the compression side of profile steel. Finally, the RAC in the columns was crushed and the apparent local bulging of square steel tube was also observed, which meant that the composite column was damaged and failed. The composite columns under eccentric compression loading suffered from typical bending failure. Moreover, the eccentric bearing capacity and deformation of the specimens decreased as the RCA replacement percentage and width to thickness ratio of square steel tube increased, respectively. Slenderness ratio and eccentricity had a significantly adverse effect on the eccentric compression performance of composite columns. But overall, the composite columns generally had high-bearing capacity and good deformation. Meanwhile, the mechanism of the composite columns under eccentric compression loads was also analysed in detail, and the calculation formulas on the eccentric compression capacity of composite columns were proposed via the limit equilibrium analysis method. The calculation results of the eccentric compression capacity of columns are consistent with the test results, which verify the validity of the formulas, and the conclusions can serve as references for the engineering application of this kind of composite columns.

• Journal of the Korean Wood Science and Technology
• /
• 제30권2호
• /
• pp.108-114
• /
• 2002

변장 14.0 cm와 16.5 cm인 소나무 정각재의 가열판진공건조와 고주파진공건조간의 건조속도, 함수율분포와 비(比)에너지를 비교하였다. 고주파진공건조는 가열판진공건조보다 건조속도 및 변장이 건조속도에 미치는 영향이 컸었다. 가열판진공건조 목재의 재장방향, 두께방향과 폭방향의 함수율분포는 볼록 형태를 나타내었고, 고주파진공건조 목재는 오목 형태를 나타내었다. 가열판진공건조 목재의 폭방향과 두께방향간의 수분경사는 유사하였으나 고주파진공건조 목재의 경우는 폭방향의 수분경사가 두께방향보다 완만하였다. 가열판진공건조와 고주파 진공건조의 비(比)에너지곡선은 함수율이 감소할수록 증가하는 경향을 나타내었고, 가열판진공건조의 비(比)는 고주파진공건조보다 컸었다.

• 대한교통학회지
• /
• 제35권1호
• /
• pp.63-78
• /
• 2017

연구는 국도 단속류 구간에서 DSRC로 수집한 개별차량 통행시간의 대푯값 산정 시 신뢰도를 높이는 최적 수집 간격을 결정하는데 목적이 있다. 이를 위하여, 단속류 구간에서 수집되는 가장 대표적인 개별차량 통행시간의 분포인 양봉형태의 비대칭 분포를 따르는 수집데이터를 활용하고 개별차량 통행시간의 수집 간격 크기를 변화시켜 MSE(Mean Square Error)를 추정함으로 오차가 최소가 되는 최적 수집 간격 크기를 결정한다. MSE 산정을 위한 편의 추정식은 비대칭 분포에서도 활용이 가능한 t-분포의 최대 추정 오차식을 활용하였다. 최적 수집 간격 분석을 위한 데이터 수집 간격은 단속류 구간에서 신호정지로 데이터 수집이 정상적으로 결측 되는 1-2분 수집 간격은 제외하고, 3분 이상의 수집 간격만을 대상으로 하였다. 데이터 수집 시 결측을 발생시키는 수집 간격은 결측 데이터 보정처리 과정에서 또 다른 오차를 유발하게 되어 배제하였다. 분석결과 MSE가 최소가 되는 최적 수집 간격은 3-5분이며, 통행시간 증가 시 최적 수집 간격은 3분으로 짧아짐을 확인하였다. 시스템 운영의 효율성과 통행시간 대푯값 산정의 신뢰도 향상을 모두 고려할 때 기본 수집 간격은 기존과 같이 5분으로 운영하고, 정체 시는 3분으로 수집 간격을 줄여 운영하는 것이 효과적일 것으로 사료된다.

• 대한본초학회지
• /
• 제22권2호
• /
• pp.115-119
• /
• 2007

Objectives : A morphological classification among Sophora tonkinensis, Menispermum dauricum and Indigofera kirilowii was made through microscopic observation. Method : The slice of the tested material made by paraffin section technique was colored with Safranine Malachite Green contrast methods, and then observed and photographed by olymphus-BHT. Result : 1. The cross-sections of Sophora tonkinensis and Indigofera kirilowii have piths, but Menispermum dauricum does not have any. 2. The lateral parts of Sophora tonkinensis cortex include the square crystal of calcium oxalate, but Indigofera kirilowii does not. Conclusion : The number of piths and the presence of the square crystal of calcium oxalate can be used to distinguished Sophora tonkinensis from Indigofera kirilowii.

• 한국정밀공학회지
• /
• 제20권1호
• /
• pp.135-143
• /
• 2003

This study presents development of a automatic design software for process and die design of hot extrusion of aluminium alloys through square dies. The design of extrusion dies is still an art rather than a science with increasing complexity of shape and thinness of section. Therefore, most of the die design is still dependent on personal judgement, intuition and experience. The objective of this study is to develop a software system which includes a design rule extracted from literatures and experts in the extrusion industry. The developed system is effectively used to design extrusion processes and dies with reduced lead time and trial extrusion.

• Steel and Composite Structures
• /
• 제9권1호
• /
• pp.19-38
• /
• 2009

The present paper provides test data to evaluate the seismic performance of recycled aggregate concrete (RAC) filled steel square hollow section (SHS) beam-columns. Fifteen specimens, including 12 RAC filled steel tubular (RACFST) columns and 3 reference conventional concrete filled steel tubular (CFST) columns, were tested under reversed cyclic flexural loading while subjected to constant axially compressive load. The test parameters include: (1) axial load level (n), from 0.05 to 0.47; and (2) recycled coarse aggregate replacement ratio (r), from 0 to 50%. It was found that, generally, the seismic performance of RACFST columns was similar to that of the reference conventional CFST columns, and RACFST columns exhibited high levels of bearing capacity and ductility. Comparisons are made with predicted RACFST beam-column bearing capacities and flexural stiffness using current design codes. A theoretical model for conventional CFST beam-columns is employed in this paper for square RACFST beam-columns. The predicted load versus deformation hysteretic curves are found to exhibit satisfactory agreement with test results.

• Wind and Structures
• /
• 제2권4호
• /
• pp.285-303
• /
• 1999

A discrete vortex method (DVM) has been developed at the Department of Aerospace Engineering, University of Glasgow, to predict unsteady, incompressible, separated flows around closed bodies. The basis of the method is the discretisation of the vorticity field, rather than the velocity field, into a series of vortex particles that are free to move in the flow. This paper gives a brief description of the method and presents the results of calculations on static and transversely oscillating square section cylinders. The results demonstrate that the method successfully predicts the character of the flow field at different angles of incidence for the static case. Vortex lock-in around the resonance point is successfully captured in the oscillatory cases. It is concluded that the vortex method results show good agreement, both qualitatively and quantitatively, with results from various experimental data.