• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.436-439
• /
• 2005

In general a square master and a dial gauge are used to measure the axis squareness on the spot. This method is a comparison measurement and its accuracy depends on the square accuracy wholly. Therefore the accuracy of a square master is very important and it is impossible that the accuracy of a square measurement is superior to the accuracy of a square master. In this paper, the new method of square measurement is proposed for measuring square without a square master and easily. This method is an absolute measurement by using a reversal method and can be used to measurement the accuracy of a square master.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.686-689
• /
• 2004

As the demands of X-Y linear motors increase, it becomes very important to measure flatness errors and to compensate them. In this study, in order to investigate flatness errors, a laser interferometer is used for measurement. To improve the measurement efficiency, a Union Jack method is adopted instead of a square method. The square method is frequently used because of its accuracy, but it requires many measurement points. In this study, the Union Jack method with Grey Theory is used. By using the Grey Theory, unmeasured data are predicted, and these are compared with results of the square method. The results show that the Union Jack method with Grey Theory is accurate enough to replace the square method.

• Nuclear Engineering and Technology
• /
• v.47 no.4
• /
• pp.500-511
• /
• 2015

In this study, the natural frequencies of the perforated square plate with a square penetration pattern are obtained as a function of ligament efficiency using the commercial finite-element analysis code ANSYS. In addition, they are used to extract the effective modulus of elasticity under an assumption of a constant Poisson's ratio. The effective modulus of elasticity of the fully perforated square plate is applied to the modal analysis of a partially perforated square plate using a homogeneous finite-element analysis model. The natural frequencies and the corresponding mode shapes of the homogeneous model are compared with the results of the detailed finite-element analysis model of the partially perforated square plate to check the validity of the effective modulus of elasticity. In addition, the theoretical method to calculate the natural frequencies of a partially perforated square plate with fixed edges is suggested according to the Rayleigh-Ritz method.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.280-283
• /
• 1999

Square dies are widely used for hot extrusion processes with high production rate. However the design and manufacture of square dies mainly relies on experience of industrial engineers To overcome such difficulty this study develops a method of automatic generation of NC-codes for the manufacture of extrusion square dies. The result shows that the method can reduce the lead time for the design and manufacture of square dies as well as eliminating engineers ow experience.

• Transactions of Materials Processing
• /
• v.9 no.2
• /
• pp.179-185
• /
• 2000

Square dies are widely used for hot extrusion processes with high production rate, however, the design and manufacture of square dies mainly relies on experience of industrial engineers. To overcome such difficulty, this study presents a method of automatic generation of NC-codes for the manufacture of extrusion square dies. The result shows that the method can reduce the lead-time for the design and manufacture of square dies.

• Kyungpook Mathematical Journal
• /
• v.52 no.3
• /
• pp.347-357
• /
• 2012

When Newton's method, or Halley's method is used to approximate the pth root of 1-z, a sequence of rational functions is obtained. In this paper, a beautiful formula for these rational functions is proved in the square root case, using an interesting link to Chebyshev's polynomials. It allows the determination of the sign of the coefficients of the power series expansion of these rational functions. This answers positively the square root case of a proposed conjecture by Guo(2010).

• Nuclear Engineering and Technology
• /
• v.49 no.1
• /
• pp.234-244
• /
• 2017

Natural frequencies of immersed square sections decrease due to a contribution of added mass to the movement of square sections. In this study, natural frequencies of square sections are obtained as a function of gap size between the square section and a rigid square wall using the finite element method. Additionally, they are used to extract the added mass effect on translational and rotation motions. Published information and studies on the translational and torsional vibration of square beams are also examined for practical use. D coupling of a square section is also investigated for multiple square sections. The suggested added mass estimation can be applicable to the spent fuel storage design of a pressurized light water modulated nuclear power plant.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.4
• /
• pp.123-129
• /
• 2013

The performance and practicality of cryptosystem for encryption, decryption, and primality test are primarily determined by the implementation efficiency of the modular exponentiation of $a^b$ (mod m). To compute $a^b$ (mod m), the standard binary squaring (square-and-multiply) still seems to be the best choice. However, in large b bits, the preprocessed n-ary, ($n{\geq}2$ method could be more efficient than binary squaring method. This paper proposes a square-and-divide and unpreprocessed n-ary square-and-divide modular exponentiation method. Results confirmed that the square-and-divide method is the most efficient of trial number in a case where the value of b is adjacent to $2^k+2^{k-1}$ or to. $2^{k+1}$. It was also proved that for b out of the beforementioned range, the unpreprocessed n-ary square-and-divide method yields higher efficiency of trial number than the general preprocessed n-ary method.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.7
• /
• pp.350-353
• /
• 2001

In general, the Least Square Error method is used for signal classification to measure distance in the $l^2$ metric or the $L^2$ metric space. A defect of the Least Square Error method is that it does not classify properly some waveforms, which is due to the property of the Least Square Error method: the global analysis. This paper proposes a new linear operator, the Integra-Normalizer, that removes the problem. The Integra-Normalizer possesses excellent property that measures the degree of relative similarity between signals by expanding the functional space with removing the restriction on the functional space inherited by the Least Square Error method. The Integra-Normalizer shows superiority to the Least Square Error method in measuring the relative similarity among one dimensional waveforms.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.967-972
• /
• 2008

This paper presents the free vibration analysis of a circular plate with a concentric square hole. The present problem deals with the numerical calculation of the natural frequencies and mode shapes of vibration of the structure by means of Independent Coordinate Coupling Method (ICCM). In this study, the boundary condition is the edge of the square hole is free and the outer circular plate is simply supported. Due to the geometric abnormality, this analysis does not permit an exact solution. Since the ICCM employs coordinate systems corresponding to each domain independently, the kinetic and potential energy expressions necessary for the Rayleigh-Ritz method can be easily obtained. Lastly, the kinematic relation is imposed. In this way, the eigenvalue problem can be easily set up. The numerical results show the efficacy of the ICCM and changes in natural frequencies and modes due to the square hole size.