• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.385-385
• /
• 2011

Ion beam Sputtering (IBS)를 이용한 물질 표면의 pattern 형성은 물리적 변수 조절로 손쉽게 nano structure의 크기와 형태를 조절할 수 있어 관심을 받고 있다. 본 연구발표에서는 massless Dirac Fermion behavior로 인한 highly carrier mobility와 같은 특성으로 인해 차세대 device material로 각광받고 있는 Graphene의 layered compound (층상구조) 형태인 HOPG (Highly Ordered Pyrolysis Graphite)에 IBS (Ion beam Sputtering)를 이용해 nano structure가 형성 가능함을 보이고 그 특징에 대해 소개하려 한다. HOPG(0001)를 Sputter 했을 때, 표면에 잘 정렬된 nano ripple pattern이 형성 가능함을 확인하였으며 sputter하는 시간을 변화하면 약 10 nm에서 80 nm까지 wavelength를 조절할 수 있다. 또한 이전의 IBS를 이용한 연구들에서 확인할 수 있는 다른 물질의 곧게 뻗은 nano ripple과는 다르게 ripple의 끝에 nano swab이 생기는 것을 AFM (Atomic Force Microscope)으로 확인할 수 있었다. 이러한 Graphite에서만 나타나는 Sputter에 의한 표면의 변화의 원인을 규명하고자 Sputter가 지속됨에 따라 나타나는 mopology의 roughness와 wavelength의 시간에 따른 dynamic scaling behavior를 확인하였고 그 얼개를 알기 위해 simulation을 수행 하였다.

• Textile Coloration and Finishing
• /
• v.3 no.2
• /
• pp.25-33
• /
• 1991

Poly(ethylene terephthalate)(PET) and nylon 6 films stretched uniaxially and biaxially were sputter etched in the presence of argon gas. The surface of the etched films was investigated using a scanning electron microscope(SEM). While cracks perpendicular to the stretched direction were observed in the uniaxil stretched films sputter etched for 30 min., many protrusions were formed in the biaxial stretched films at the height of 0.3-0.4 gm for PET and $0.1-0.2\mum$ for nylon 6. The tops of two or three protrusions merged etching time increased to 60 min. The contact angle to water of the sputter etched PET and nylon 6 films decreased steeply when etched for one to 3 min. In order to investigate chemical changes on the surface ESCA analysis was carried out. In both films sputter etched $C_{1s}$ intensity decreased and $O_{1s}$ intensity increased compared with the unetched ones.

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.3
• /
• pp.37-47
• /
• 1990

In accordance with the high precision of mechanical elements, it has been required to high precision in surface roughness measurement and, therefore, stylus tip radius is manufa- ctured less than 2 .mu. m through ion sputter machining. In this experiment, by suing ion sputter machined stylus pf fine tip, radius and lapping machined stylus, surface roughness of standard specimens, silicon wafer were measured and then Rmax, Ra, RMS value were investi- gatedaccording to the variation of tip radius of stylus. As a result, measuring error due to the variation of stylus tip radius in surface roughness measurement was decreased by using ion sputter machined stylus and also the measuring accuracy was improved. And the measuring variation of Ra, RMS calculated from correlation coefficient lager than 0.9 on the wave of short period and amplitude using ion sputter machined stylus of fine tip radius.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1996.11a
• /
• pp.87-87
• /
• 1996

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1996.11a
• /
• pp.129-131
• /
• 1996

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2006.10a
• /
• pp.1-1
• /
• 2006

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.4
• /
• pp.322-327
• /
• 2006

CdS films have been prepared on polycarbonate, polyethylene terephthalate, and Coming 7059 substrates by r.f magnetron sputtering technique at room temperature. A comparison of the properties of the films deposited on polymer and glass substrates was performed. In addition, the influence of the sputter power on the structural and optical properties of these films was evaluated. The XRD measurements revealed that CdS films were polycrystalline and retained the mixed structure of hexagonal wurtzite and cubic phase, regardless of substrate types. As the sputter power was increased from 75 to 150 Watt, the structure of CdS films was converted from the mixed of hexagonal and cubic phase to hexagonal phase. The morphology of CdS films is found to be continuous and dense. Also, the grain of CdS films is larger with increasing the sputter power. The average transmittance exceeded 80 % in the visible spectrum for all films and decreases slightly with the sputter power.

• Journal of the Korean institute of surface engineering
• /
• v.45 no.2
• /
• pp.75-80
• /
• 2012

A sputter-sublimation source was tested for high rate deposition of protective coating of PEMFC(polymer electrolyte membrane fuel cell) with high electrical conductivity and anti-corrosion capability by DC biasing of a metal rod immersed in inductively coupled plasma. A SUS(stainless steel) tube, rod were tested for low thermal conductivity materials and copper for high thermal conductivity ones. At 10 mTorr of Ar ICP(inductively coupled plasma) with 2.4 MHz, 300 W, the surface temperature of a SUS rod reached to $1,289^{\circ}C$ with a dc bias of 150 W (-706 V, 0.21 A) in 2 mins. For 10 min of sputter-sublimation, 0.1 gr of SUS rod was sputter-sublimated which is a good evidence of a high rate deposition source. ICP is used for sputter-sublimation of a target material, for substrate pre-treatment, film quality improvement by high energy particle bombardment and reactive deposition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.88-88
• /
• 2010

We synthesized molybdenum thin films deposited by RF magnetron sputtering and physicochemical analysis was performed. The physical and chemical properties of these films were examined with X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The obtained film at the oxygen ratio of 0% showed crystallinity of cubic Mo(110) phase. After the oxygen ratio increased more than 5% in the sputter gas, the molybdenum films were formed as an amorphous phase. The thickness of the Mo thin film was drastically decreased from 1000 nm to ca 70 nm after introduction of oxygen in the sputter gas confirmed by spectroscopic ellipsometer (SE) and scanning electron spectroscopy (SEM). The calculated band gap of the film deduced from SE data increased from 3.17 to 3.63 eV by addition of oxygen in the sputter gas. The roughness of the Mo film was examined with atomic force microscopy (AFM) and it was dramatically decreased by introducing of oxygen during sputtering. XPS results revealed that the ratio of metallic Mo species in the film decreased by the contents of Mo(VI) species increased at the ratio of oxygen increased in the sputter gas and fully oxidized at low content of oxygen in the sputter gas.

• Electrical & Electronic Materials
• /
• v.2 no.1
• /
• pp.25-32
• /
• 1989

Silicon Nitride, Silicon OxyNitride, Silicon Oxide film을 RF Sputter법으로 제작하였다. RF power 1kw에서 산소 공급량과 기관온도에 따라 제작된 막의 조성을 ESCA로 분석하였으며 산소 공급량과 기판온도의 증가에 따라 막에서의 산소함량이 크게 증가하였다. 또한 막의 밀도, 굴절율, 유전율은 산소함량의 증가에 따라 감소하였고 분극율은 Clausius-Mossotti방정식에서 얻을 수 있었다.