• 상하수도학회지
• /
• 제32권2호
• /
• pp.115-122
• /
• 2018

Direct spring loaded pressure relief valve(DSLPRV) is a safety valve to relax surge pressure of the pipeline system. DSLPRV is one of widely used safety valves for its simplicity and efficiency. However, instability of the DSLPRV can caused by various reasons such as insufficient valve volume, natural vibration of the spring, etc. In order to improve reliability of DSLPRV, proper selection of design factors of DSLPRV is important. In this study, methodology for selecting design factors for DSLPRV was proposed. Dynamics of the DSLPRV disk was integrated into conventional 1D surge pressure analysis. Multi-objective genetic algorithm was also used to search optimum design factors for DSLPRV.

• 해양환경안전학회지
• /
• 제6권2호
• /
• pp.47-56
• /
• 2000

This paper describes a simple prediction method of beach recession induced by storm surge. In order to evaluate the severest beach erosion, it is assumed that maximum beach recession occurs at the coming of storm surge overlapped with spring tide. Consequently, total surge lev디 becomes the sum of storm surge level and tidal range. Generally, storm surge level around Korea is small compared with tidal range. Therefore total surge can be expressed as the series of surges, which have same duration as tide. Through the case studies, the author Investigates correlation between tidal range, duration, wave condition, beach slope and beach recession.

• 한국안전학회지
• /
• 제31권5호
• /
• pp.67-73
• /
• 2016

This study investigates the seismic performance of the surge tank which is of the atmospheric type and constructed above the ground. For that purpose, three different numerical models of the surge tank have been taken into account. Two models are constructed to describe the surge tank with different support conditions: one is to model all supports as fixed, and the other is to use spring element for the rock conditions. The third model is constructed to describe not only the surge tank with spring element of the rocks but also the vertical waterway tunnel. Through the time-history analysis of the surge tank subjected to three artificially excited ground motions, it is demonstrated that there can be much difference between the three models of our interest according to the support conditions and inclusion of the vertical waterway tunnel. However, their seismic performances still remain below the safety criteria, i.e., dynamic allowable stress. Also, the numerical results let us know where the critical sections occur. These results could be used to develop the efficient seismic enhancement method for the surge tank.

• 한국해안·해양공학회논문집
• /
• 제26권3호
• /
• pp.140-148
• /
• 2014

고조방파제는 폭풍해일이나, 대조시 창조류로부터 내부 해역을 보호하기 위하여 설계된 특수한 형태의 수문 구조물로, 홍수 방지 벽, 방조제 및 다른 구조물로 구성된다. 평상시 고조방파제는 해수 소통을 허용하지만, 폭풍해일이 예상되면 폐쇄된다. 폐쇄시키는 다양한 방법 중 본 연구에서는 이태리 모세프로젝트에 적용한 것과 같은 부유 플랩형 고조방파제를 마산만에 적용할 경우, 폭풍해일 및 파랑이 작용할 때의 고조방파제 거동특성을 3차원 유동해석프로그램인 FLOW-3D를 이용하여 살펴보았다. 수치해석결과, 고조차 2 m인 상태에서 파고 3 m 조건에서도 고조방파제로서의 기능을 발휘할 수 있는 것으로 평가되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2236-2241
• /
• 2008

To predict the dynamic behaviour of railway vehicle, the complex vehicle structure has been described by mathmatical model such as mass, spring and damper. Air-spring has played a major role to improve dynamic characteristics, vibration isolation and ride comfort. The mechanical behaviour of air spring is very complicated. The behaviour is based on fluid and thermodynamic mechanisms. The main parameters of air spring are stiffness due to compression of the air in the spring and surge reservoir, change of area stiffness and orifice damping. In this paper, we have studied an air-spring modeling method and compared the difference between calculation and test.

• 유공압시스템학회논문집
• /
• 제2권1호
• /
• pp.15-22
• /
• 2005

The purpose of this study is to find the effective dynamic characteristics of an improved pneumatic cushion cylinder with a spring type needle valve. The dynamic model represented the peak pressure control method when the pneumatic cushion cylinder is moving forward or backward in the horizontal direction. It was found from the simulation results that the peak pressure in the cushion chamber is affected by the spring, which helps to understand the performance of the pneumatic cushion cylinder and to improve or design a better cushion needle valve component. From the simulation results, the stability of pneumatic cushion cylinder with a spring type needle valve was superior and its cushion capability was also better than that without the spring.

• International Journal of Ocean System Engineering
• /
• 제2권1호
• /
• pp.37-49
• /
• 2012

An analysis of potential flooding by storm surge and wave run-up and overtopping can be used to evaluate protection afforded by the existing storm protection system. The analysis procedure can also be used to evaluate various protection alternatives for providing typhoon flood protection. To determine risk, the storm surges for both historical and hypothetical are compiled with tide conditions to represent high, slack and low water for neap, spring and mid range tides to use with the statistical procedure known as the Empirical Simulations Technique (EST). The EST uses the historic and hypothetical events to generate a large population of life-cycle databases that are used to compute mean value maximum storm surge elevation frequency relationships. The frequency-of-occurrence relationship is determined for all relevant locations along the shoreline at appropriate locations to identify the effect using the Empirical Storm Simulation (EST). To assist with understanding the process, an example is presented for a study of storm surge analysis for Freeport, Texas. This location is in the Gulf of Mexico and is subject to hurricanes and other tropical storms that approach from the Atlantic Ocean.

• 오토저널
• /
• 제15권2호
• /
• pp.53-63
• /
• 1993

A numerical modeling technique is proposed for computer simulations of high speed valve train dynamic terms in the valve spring reaction forces are calculated using linear vibration theory for given kinematic valve motions. Because the spring dynamics are analyzed before the time stepping integration, spring surge phenomena can be included without using additional computer time. In addition to that, steady state response of the valve dynamics can be obtained by just one cycle simulation. Consequently, valve train dynamics can be simulated very quickly without noticeable errors in accuracy. The experimental result prove the computer model developed here is accurate and also computationally efficient. The model is especially useful for cam profile optimizations.

• 대한지리학회지
• /
• 제40권3호
• /
• pp.285-295
• /
• 2005

본 연구에서는 우리나라 19개 지점의 일평균기온을 분석하여 꽃샘추위 발생 일수의 분포와 변화 경향을 파악하고자 하였다. 꽃샘추위 발생일은 일평균기온과 일평균기온 평년값(1971-2000)의 편차를 계산하여 일평균기온이 평년값보다 낮은 상위 $10\%$에 해당하거나 당일과 2일전과의 평균기온 차에서 당일의 평균기온이 낮은 상위 $10\%$에 해당하는 날로 정의하였다. 꽃샘추위 발생일은 서해안이 동해안보다 많고, 위도가 높아질수록 많다. 꽃샘추위 발생일의 순별 분포 유형은 기압계 및 지형과 밀접한 관련이 있어 동해안과 서해안 지역, 도서 지역으로 구별된다. 꽃샘추위의 발생 일수는 한반도가 시베리아 고기압의 영향을 받는 빈도 및 강도와 관련이 있으며 최근 대부분 지역에서 감소하는 경향이다. 그러나 울릉도와 동해안 지역에서는 꽃샘추위 발생 일수 변화가 거의 없어 꽃샘추위 발생 원인이 다르다.

• 한국해안·해양공학회논문집
• /
• 제24권3호
• /
• pp.210-216
• /
• 2012

극치해면 추정을 위해 EST기법을 동해연안에 적용하였다. 과거 60년간 발생한 TY급 태풍 51개에 의한 해일고를 ADCIRC모형으로 계산하여 트레이닝세트에 포함하였고, 태풍을 제외한 매년 발생하는 최대해일고를 계절풍에 의한 것으로 간주하여 계절풍에 따른 해일고도 응답벡터로 설정하였다. 조위조건을 입력벡터에 포함시켜 태풍시에는 고 저조 조건을 포함시켰으며 계절풍시에는 대 소조 조건을 입력벡터에 반영하였다. 이때 두 경우 모두 연주조를 감안하여 응답벡터를 작성하였다. 적용결과를 기존연구와 비교한 결과 정 등(2008)의 결과와 거의 일치하고 있어 본 방법의 적합성을 입증할 수 있었다.