• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1150-1153
• /
• 1995

This paper describes that study which construct a theoretic and experimental algorithm in order to make the automatic correction system od detent spring, and when load for correction pressed at spring, it can be found elastic and plastic deformation quantities by Finite Element Analysis. As a result, it has been found that the simulation datas are in good agreement with experimental results.

• 한국공작기계학회논문집
• /
• 제14권1호
• /
• pp.89-94
• /
• 2005

The objective of this study is structural analysis of rope brake by spring type. The finite element model was developed to compute the stress, strain and friction force for rope brake by spring type. The ANSYS code was used for this analysis. In order to structural analysis of rope brake, many variables such as internal pressure, boundary condition load condition and constraints were considered.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 추계학술대회논문집
• /
• pp.57-68
• /
• 1995

A design methodology is applied for manufacturing the valve-spring retainer component. The design criterion is the forging load within the available press limit. Also, the final product should not have any geometrical defect. The rigid-plastic TEM has been applied to simulate the conventional five-stage manufacturing processes, which include mainly backward extrusion and heading process. Simulations of one step process from selected stocks to the final product shape are performed for a possibly better process than the conventional one.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.150-155
• /
• 2004

The objective of this study is structural analysis of rope brake by spring type. The finite element model was developed to compute the stress, strain and friction force for rope brake by spring type. The ANSYS code was used for this analysis. In order to structural analysis of rope brake, many variables such as internal pressure, boundary condition, load condition and constraints were considered.

• 대한기계학회논문집A
• /
• 제38권12호
• /
• pp.1345-1350
• /
• 2014

본 연구에서는 자동차 판스프링을 대상으로 유리섬유 복합재의 적용을 위한 해석적 방법들을 제시하였다. 즉, 판스프링의 정적거동에 영향을 미치는 복합재 재료의 구성 성분비와 섬유각의 변화 등을 고려한 해석을 수행하였다. GFRP 복합재의 기계적 성질들은 ASTM 표준시험 방법을 따라서 직접 측정하였으며, 역해석 방법을 통해서 섬유와 수지 각각의 직교이방성과 등방성 성질들을 시험결과들로부터 재구성하였다. 다음으로 섬유의 방향과 섬유와 수지의 함유량 비와 같은 주요 재료변수들의 변화에 따른 스프링 계수들의 변화를 분석하였다. 마지막으로 초기 파괴하중을 예측하기 위해서 선형 탄성해석과 파손조건식을 이용해서 점진적 파괴해석을 수행하였으며, 그 결과 최초의 손상부위는 전단응력에 의해 판스프링의 모서리 부위에서 발생하였다.

• 대한기계학회논문집A
• /
• 제31권7호
• /
• pp.725-731
• /
• 2007

An air spring which is a part of the suspension system of automobiles is used to reduce and absorb the vibration and the noise. Main components of the air spring are a cord reinforced rubber bellows, a canister and a piston. The performance of the air spring are depended on configurations of rubber bellows, the angle and elastic modulus of cord. The finite element analysis are executed to predict and evaluate the load capacity and the stiffness. The design variables of air spring are determined to adjust the required specifications of the air spring. Several samples of the air spring are manufactured and experimented. It is shown that the results by finite element analysis are in close agreement with the test results.

• 동력기계공학회지
• /
• 제18권2호
• /
• pp.77-82
• /
• 2014

The air spring is widely used in various fields such as a suspension system and an anti-vibration system because the natural frequency is kept constant regardless of the change in the load, spring constant is easy to change, and, vibration and shock isolation performance are excellent. The purpose of this study is to derive a nonlinear governing equation of an air spring, to analyze the effect of the various parameters on the dynamic stiffness of the air spring, and, to suggest a more efficient design method of an air spring system. In order to do so, this study investigates the impact of all the parameters that could affect the dynamic stiffness of the air spring while changing the excitation amplitude and the frequency with a developed governing equation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.504-509
• /
• 2005

Railway noise and vibration has been recognized as major problems with the speed-up of rolling stock. As a kind of solution to these problems, the decrease of stiffness of track pad have been tried. However, in this case, overturning of rail due to lateral force should be considered because it can have effect on the safety of running train. Therefore, above two things - decrease of stiffness of track pad and overturning of rail due to lateral force - should be considered simultaneously for the appropriate determination of spring coefficient of track pad. With this viewpoint, minimum spring coefficient of track pad is estimated through the comparison between the theoretical relationship about the overturning of rail and 3-dimensional FE analysis result. Two kinds of Lateral force and wheel load are used as input loads. Extracted values from the conventional estimation formula and the Shinkansen design loads are used. It is found that the overturning of rail changes corresponding to the change of the stiffness of track pad and the ratio of lateral force to wheel load. Moreover, it is found that the analysis model can have influence on the results. Through these procedure, minimum spring coefficient of track pad is estimated.

• 대한치과교정학회지
• /
• 제22권1호
• /
• pp.135-146
• /
• 1992

It was the purpose of this study to analyze and compare the mechanical properties of ortho dontic open coil springs. Four variable factors were presented - wire diameter (.008", .009", .010"), lumen size (.030", .032", .036"), arch wire size and shape (.016" round, $ .016^{{\prime}{\prime}}{\times}.022^{{\prime}{\prime}}$ rect.) and alloy type (HiT II, Elgiloy, Sentalloy). The total 104 specimens were divided into 13 groups, and compression test was performed on an Instron test machine. The load deflection curve of each open coil spring was obtained, from which, the load-deflection relations, stiffnesses, percent recoveries were computed statistically. The results were obtained as follows: 1. When the lumen size of the coil spring remained constant, stiffness and percent recovery increased as the wire diameter increased. 2. When the wire diameter of the coil spring remained constant, stiffness and percent recovery decreased as the lumen size increased. 3. The effect of size and shape of arch wire on the coil spring was not statistically significant. 4. In alloy types, stiffness was the greatest in HiT II (55.21), Elgiloy (42.61) and Sentalloy (7.74) in that order. Sentalloy exhibited superior percent recovery and long range of action.

• 한국물환경학회지
• /
• 제33권6호
• /
• pp.650-660
• /
• 2017

In this study, pollutant emission characteristics by water damage period analyzed 11 items (water temperature, pH, DO, EC, BOD, COD, TOC, SS, T-N, T-P and flow) with load duration curve, time series load curve and factor analysis for three years (2014-2016). Load duration curve is applied to judge the level of impaired waterbody and estimate impaired level by pollutants such as BOD and T-P in this study depending on variation of stream flow. Water quality standard exceeded the flow of mid-range and low-range by flow condition evaluation using load duration curve. This watershed was influenced by point source more than non-point source. Cumulative excess rate of BOD and T-P kept water quality standard for all seasons (spring, summer, autumn and winter) except BOD 59% in spring. Water quality changes were influenced by pollutants of basic environmental treatment facilities and agricultural areas during spring and summer. Results of factor analysis were classified commonly first factor (BOD, COD, and TOC) and second factor (flow, water temperature and SS). Therefore, effects of artificial pollutants and maintenance water must be controlled seasonally and reduced relative to water damage caused by point pollution sources with effluent standard strengthened in the target watershed.