• 한국구조물진단유지관리공학회 논문집
• /
• 제12권4호
• /
• pp.71-78
• /
• 2008

철도교량의 경우, 열차하중에 의한 영향으로 교량 단부에서 상향력이 발생하였으며, 이 상향력은 체결장치에 압축력과 인장력을 유발시켰다. 현재까지 이에 대한 안전성을 검토하기 위해 체결장치를 1방향의 스프링 요소로 모사하여 구조해석을 수행해 왔다. 이러한 경우에 스프링 요소의 강성은 압축력을 재하한 실험적 연구에 의하여 산정되었다. 따라서, 상향력은 체결장치에 압축력뿐만 아니라 인장력도 유발시키기 때문에 합리적이고 정확한 구조해석을 수행하기 위해서는 인장력을 재하한 실험적 연구로부터 산정된 병진방향 강성 그리고 회전방향 강성을 함께 고려해야 한다. 본 연구에서는 6가지 실험체에 대하여 탄성과 비탄성 실험을 수행하여 레일 연직방향 병진강성과 레일 강축에 대한 회전강성을 검토하였고, 체결장치의 구조적인 거동을 분석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전력기술부문
• /
• pp.41-43
• /
• 2002

The contracted electric power and the demand factor of customers are used to predict the peak load in distribution transformers. The conventional demand factor was determined more than ten years ago. The contracted electric power and power demand have been increased. Therefore, we need to prepare the novel demand factor that appropriates at present. In this paper, we modify the demand factor to improve the peak load prediction of distribution transformers. To modify the demand factor, we utilize the 169 data acquisition devices for sample distribution transformers in winter, spring summer. And, the peak load currents were measured by the case studies using the actual load data, through which we verified that the proposed demand factors were correct than the conventional factors. A newly demand factor will be used to predict the peak load of distribution transformers.

• 대한기계학회논문집A
• /
• 제20권12호
• /
• pp.3767-3781
• /
• 1996

Generally, dynamic loads are applied to real structures. Since the analysis with the dynamic load is extremely difficult, static loads are utilized by proper conversions of the dynamic loads. The dynamic loads are usually converted ot static loads by safety foactors of experiences. However, it may increase weight and decrease reliability. In this study, a method is proposed for the conversion process. An equivalent static load is calculated ot generate a same maximum displacement. The method is verified through numerical tests on a spring-mass systems of one and multi degrees-of freedom. It has been found that the duration time of the loads and the natural frequencies of the structures are critical in the conversion process. A road arem is a self-propelled howizer is selected for the application of the proposed method. The shape of the road arm is optimized under the converted static loads.

• 대한토목학회논문집
• /
• 제26권2D호
• /
• pp.299-309
• /
• 2006

철도의 고속화와 관련하여 궤도와 구조물의 진동 및 열차소음 등에 대한 대처가 중대한 과제가 되고 있다. 이에 대한 대책으로 궤도패드에 대한 저 탄성화를 제안하여 궤도시스템의 저 탄성화를 추구하고 있지만 곡선부 선로에서 열차의 주행안전을 저해하는 횡압에 의한 레일의 회전이 문제가 되고 있다. 따라서 궤도의 저 탄성화를 위해서는 열차의 주행안전성을 만족하는 궤도패드의 최소 수직 스프링계수의 결정이 매우 중요하다. 이러한 경향에 따라서 본 논문에서는 궤도패드의 최소 수직 스프링계수 결정을 위해 기존의 레일 회전에 관한 이론해와 궤도의 3차원 비선형 유한요소모델간의 결과를 비교 검토하여 열차의 주행안전성을 만족할 수 있도록 하였다. 해석 하중은 차량조건과 궤도조건을 고려한 윤중 횡압 추정식을 구성하여 안전측으로 산정한 하중과 일본의 신간선 하중을 비교 검토하여 궤도 모델에 적용하였다. 구조해석 결과 레일의 회전은 횡압/윤중비와 패드의 강성에 따라서 두 가지 구조해석 모델간 차이가 변화함을 확인하였고, 그 결과 중에서 안전측으로 패드의 최소 강성을 결정하였다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2006년도 추계학술발표대회 논문집
• /
• pp.306-309
• /
• 2006

The architectural difference between the existing residence and high-rise residential building causes changes on environmental conditions such as ventilation and insulation. The object of this study is to present the improvement on envelop of high-rise residential buildings to reduce heating and cooling load. To improve the environmental performance of envelop, it is necessary to modify envelop vent system and ensure intermediate space. In this study, the shape of vents in high-rise residential buildings has been inspected, and the survey about the interior environmental conditions related to the envelop of high-rise residential building has been conducted. Environmental measurement has been done to examine out door air quality for natural ventilation.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.193-200
• /
• 2004

In this study, the impact load on bridge by vessel collision in consideration of fender system is evaluated by numerical method. The bow of object vessel(DWT5000) is standardized, and modeled by shell elements. The main body of objective vessel is modeled by beam elements that present mass distribution and stiffness of vessel. The buoyancy effect of vessel is considered as linear spring. The two types of fender systems, such as steel and rubber are analyzed in this study. In steel fender system, the steel plates that absorb collision energy by its collapse are modeled by shell element with stiffener. The steel is material modeled elastic-plastic material. In the rubber fender system, the rubber material is modeled hyper-elastic material and the main body of fender is modeled by solid elements. The global impact responses of vessel and fender system are evaluated by explicit dynamic scheme. The results show that the magnitude of vessel collision force are depended on the material behavior of fender system. Also the values of collision load are conservative compare to the those of design codes.

• 센서학회지
• /
• 제3권2호
• /
• pp.24-32
• /
• 1994

힘 증강기법을 이용하여 10 MN 로드셀 3개로 30 MN 힘 센서를 설계 제작하였다. 로드셀은 스트레인 게이지방식으로서 기둥형 감지부로 설계되었으며 오차를 줄이기 위하여 온도보상회로등이 내장되어 있다. 특성실험 결과 제작된 힘 센서의 총오차는 0.1 %이내로 추정되어 4.5 MN 이상의 대용량 재료시험기의 교정 및 시험에 유용하게 사용될 것으로 기대된다.

• 한국정밀공학회지
• /
• 제26권5호
• /
• pp.128-134
• /
• 2009

This paper aims to design a variable-stiffness type economical safety joint for service robots. The safety joint was designed to have a passive shock absorbing mechanism for protecting human from a catastrophic collision under service condition of robots. A simple mechanism composed of two action disks for switching the load transfer, a spring and a screw for pre-load was proposed. In order to evaluate the performance of the safety joint a testing platform which can carry out the static and impact tests was also designed and fabricated. From the test results, the designed safety joint was proved to have a variable load-carrying capacity and about 42% impact absorption capacity with simple manipulation of the control screw.

• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.82-86
• /
• 1999

An experimental study has been carried out to reduce bending load, surface roughness and springback in bending process of stainless steel sheets. A U-bending test has been performed to investigate appropriate process parameters for getting better surfaces and accurate dimensions of stainless steel products. In the test, selected process parameters are die material, lubricant, and die clearance. Die materials used in the test are STD11(HRC60), STD11(TiCN), and AMPCO. From the test results, we can suggest that AMPCO dies are most suitable for reducing bending load and surface roughness of stainless steel sheets. And STD11 dies are favorable for avoiding spring-back in the stainless steel sheet-bending.

• Steel and Composite Structures
• /
• 제1권3호
• /
• pp.341-354
• /
• 2001

This paper provides a state-of-the-art review on advanced analysis models for investigating the load-displacement and ultimate load behaviour of steel and composite frames subjected to static gravity and lateral loads. Various inelastic analysis models for steel and composite members are reviewed. Composite beams under positive and negative moments are analysed using a moment-curvature relationship which captures the effects of concrete cracking and steel yielding along the members length. Beam-to-column connections are modeled using rotational spring. Building core walls are modeled using thin-walled element. Finally, the nonlinear behaviour of a complete multi-storey building frame consisting of a centre core-wall and the perimeter frames for lateral-load resistance is investigated. The performance of the total building system is evaluated in term of its serviceability and ultimate limit states.