• 한국대기환경학회지
• /
• 제33권5호
• /
• pp.458-472
• /
• 2017

The optical properties and direct aerosol radiative forcing (DARF) of different aerosol components in $PM_{2.5}$ (water-soluble, insoluble, black carbon (BC), and sea-salt) were estimated using the hourly resolution data measured at Aewol intensive air monitoring site on Jeju Island during 2013, based on a modeling approach. In general, the water-soluble component was predominant over all other components with respect to its impact on the optical properties(except for absorbing BC) and DARF. The annual mean aerosol optical depth (AOD) at 500 nm for the water-soluble component was $0.14{\pm}0.14$ ($0.04{\pm}0.01$ for BC). The total DARF at the surface ($DARF_{SFC}$) and top of the atmosphere ($DARF_{TOA}$), and in the atmosphere ($DARF_{ATM}$) for most aerosol components(except for sea-salt) during the daytime were highest in spring and lowest in fall and/or summer. The maximum $DARF_{SFC}$ of most aerosol components occurred around noon (12:00~14:00 LST) during all seasons, while the maximum $DARF_{TOA}$ occurred in the afternoon (13:00~16:00 LST) during most seasons (except for spring). In addition, the estimated $DARF_{SFC}$ and $DARF_{ATM}$ of the water-soluble component were -20 to $-59W/m^2$ and +3.5 to $+14W/m^2$, respectively, while those of BC were -18 to $-29W/m^2$ and +23 to $+37W/m^2$, respectively.

• 대한치과교정학회지
• /
• 제30권3호
• /
• pp.273-285
• /
• 2000

본 연구의 목적은 1200g.mm의 모멘트를 발생시키는 두 종류의 canti-lever형 구치직립 스프링 중 치관직립형(crown uprighting)과 치근직립형(root uprighting)을 Calorific machine 상에 각 각 5회씩 적용하여 나타난 저항원 및 근심경사치의 동적인 치아이동 양상을 좀더 구체적으로 비교해 보는데 있다. 열 발생 및 온도조절 장치, 실험용 치아, 그리고 실험용모델로 구성 된 Calorific machine을 이용하여 치아이동 전, 후에 얻어진 2장의 교합X-선사진 상에 X-선 불투과상으로 나타난 두 개의 임플란트를 기준 표지점으로 중첩함으로써 치아이동 전후의 시상면과 교합면 상에서의 위치변화를 확인하였다. 각 스프링의 변화량을 2회씩 계측한 결과 조사자내 동의율(intra-examiner agreement)과 조사자간 동의율(inter-examiner agreement)은 $96.54\%$와 $95.73\%$였으며 각 스프링의 실험 전, 후의 유의성 검증과 두 스프링간의 유의성 여부를 짝비교(Paired t-test)로 통계처리한 결과 다음과 같았다. 1. 치관직립 스프링 보다 치근직립 스프링을 사용할 때 저항원의 상실량이 원심 및 협측방향으로 크게 나타났다. 2. 치관직립 스프링 사용시 경사치 치관의 원심이동량은 ,3.29mm 였으나 치근직립 스프링은 1.68mm 였다. 3. 치관직립 스프링 사용시 경사치의 근, 원심 치근의 전방 이동량은 각각 3.91mm, 3.60mm였으나 치근직립 스프링에서는 각각 6.76mm, 6.26mm였다.

• Journal of the korean society of oceanography
• /
• 제35권3호
• /
• pp.129-152
• /
• 2000

The Cheju Current (CC), defined here as a mean eastward flow in the Cheju Strait, mostly carries water of high temperature and salinity originating from the Kuroshio in winter and spring, the Cheju Warm Current Water (CWCW). The strong core of the eastward component of the CC is found close to Cheju Island (Cheju-Do, hereafter) in winter and spring with a peak speed of about 17.0 cm/s. The eastward flow weakens towards the northern Cheju Strait, and a weak westward flow occurs occasionally close to the southern coast of Korea. The volume transport ranges from 0.37 to 0.45 Sv(1 Sv=10$^6$ m$^3$/s) in winter and spring. Seasonal thermocline and harocline are formed in summer and eroded in November. The occurrence of the CWCW is confined in the southern Cheju Strait close to Cheju-Do below the seasonal thermocline in summer and fall, and cold water occupies the lower layer north of the CWCW which is thought to be brought into the area from the area west of Cheju-Do along with the CWCW. Stratification acts to increase both the speed of the CC with a peak speed of greater than 30 cm/s and the vertical shear of the along-strait currents. The strong core of the CC detached from the coast of Cheju-Do and shifted to the north during the stratified seasons. The volume transport in summer and fall ranges 0.510.66 Sv, which is about 1.5 times larger than that in winter and spring. An annual cycle of the cross-strait sea level difference shows its maximum in summer and fall and minimum in winter and spring, whose tendency is consistent with the annual variability of the CC and its transport estimated from the ADCP measurements. Moored current measurements west of Cheju-Do indicate the clockwise turning of the CC, and the moored current measurements in the Cheju Strait for 1530 days show the low-frequency variability of the along-strait flow with a period of about 37 days.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.26-36
• /
• 2013

Purpose of this study is to develop virtual components and environment for developing a controller of an Active Air Suspension System in laboratory that slough off existing development environment using real vehicle test. This paper presents an air spring modeling and analysis of air suspension system for a commercial vehicle. Preferentially, It was performed vehicle test for pneumatic system and an air spring for characteristic analysis of system. Each component of an air spring suspension system was developed through emulations and modeling of system for pressure and height sensors in the basis on test results in SILS environment. Non-linear characteristics of air spring are accounted for using the measured data. Also, pressure and volume relations for vehicle hight control is considered. After performance verification of virtual model was performed, we developed virtual environment based on HILS for an Active Air Suspension System. We studied estimation and verification technology for control algorithm that developed.

• 센서학회지
• /
• 제27권2호
• /
• pp.112-117
• /
• 2018

In this study, a bender-type piezoelectric energy harvester was fabricated and evaluated to compensate for the disadvantages of high-power generation only in the resonance frequency range of a piezoelectric harvester using a piezoelectric cantilever. The generated power was investigated according to various changes in the vibration environment. Compared with the piezoelectric cantilever module, the bender-type piezoelectric module showed a larger number of peak voltages. The primary peak voltage shifted toward the low frequency when the spring was coupled to the bender-type piezoelectric module. The harvester of the three bender-type modules had a vibration frequency exceeding 1 mW in the 34-45 Hz range and generated 3.112 mW of power at the vibration frequency of 38 Hz. The harvester of the six bender-type modules had a vibration frequency exceeding 1 mW in the 31-45 Hz range and generated 3.081 mW of power at the vibration frequency of 35 Hz.

• 한국환경보건학회지
• /
• 제30권5호
• /
• pp.455-468
• /
• 2004

The purpose of this paper is to understand the time series and origin of a chemical component and to compare the difference during yellow sand episodes for analysis $PM_{10}$ chemical components in the region of west in Korean Peninsula, 1999-2001. An annual mean concentration of $PM_{10}$ is $29.1\;{\mu}g/m^3$. A monthly mean and standard deviation of $PM_{10}$ concentration are very high in spring but there is no remarkably seasonal variation. Also, water soluble ionic component of $PM_{10}$ be influenced by double more total anion than total cation, be included $NO_{3}^-\;and\;SO_{4}^{2-}$ for the source of acidity and $NH_{4}^+$ to neutralize. Tracer metals of $PM_{10}$ slowly increases caused by emitted for soil and ocean (Fe, Al, Ca, Mg, Na) and Zn, Pb, Cu, Mn for anthropogenic source. According to method of enrichment factor (E.F) and statistics, assuming that the origin of metal component in $PM_{10}$ most of element in the Earth's crust e.g. Mg, Ca, Fe originates soil and Cu, Zn, Cd, Pb derives from anthropogenic sources. The ionic component for $Na^{+}\;Cl^-,\;Mg^{2+}\;and\;Ca^{2+}$ and Mg, Al, Ca, Fe originated by soil component largely increase during yellow sand period and then tracer metal component as Pb, Cd, Zn decrease. According to factor analysis, the first group is ionic component ($Na^+,\;Mg^{2+},\;Ca^{2+}$) and metal component (Na, Fe, Mn and Ni) be influenced by soil. The second group, Mg, Cr also be influenced by soil particle.

• The Korean Journal of Ecology
• /
• 제16권2호
• /
• pp.209-227
• /
• 1993

Aquatic insects were collected from 18 sites in the Yongsan River System from August, 1988 to July, 1989. The monthly fluctuation and distributional pattern of the aquatic insects along the environmental factors were investigated. Quantitatively collected aquatic insects were identified, and numbers, standing biomass, dominance indices and diversity indices in each site and month were determined. The aquatic insect faun of the Yongsan River System was composed of 146 species, 82 genera, 38 families in 7 orders including 44 species of mayflies, 32 species of caddisflies, 24 species of stoneflies, 21 species of flies, 16 species of beetles, 6 species of dragonflies and 3 species of dobsonflies. Seasonal occurrence of species were more diversified in winter and spring than in summer. Also, the number of individuals occurred was higher in winter and spring than in summer while it was the highest in upper stream and the lowest in Kwang-ju stream. Component ratio of the number of individuals according to the insect orders was as follows: Mayflies 38.71%, Flies 36.97%, Stoneflies 10.21%, Caddisflies 6.80%, Beetles 2.96%, Dobbsonflies 2.74%, Dragonflies 0.95%. Percentage of standing biomass according to insect orders were as follows: Mayfiles 32.81%, Stoneflies 26.51%, Caddisflies 17.58%, Dobbsonflies 14.84%, Flies 3.74%, Beetles 3.08%, Dragonflies 1.45%, The highest standing biomass occurred in spring and the lowest in summer.

• 한국해양공학회지
• /
• 제10권4호
• /
• pp.10-16
• /
• 1996

The vibration due to progressive ocean waves is analyzed for a typical footing-type offshore airport platform. The platform is modelled as a spring-supported Euler beam and buoyancy change due to wave is considered as excitation force, under the assumption that the wave propagates without distortion by the structure. The results show that the natural frequencies of this structure are distributed very closely and are little affected by boundary conditions and that the response charateristics due to ocean waves are quite different according to the wave frequency. In this study, the wave frequencies are divided into three regions; the resonance region at which the response is governed by the resonance between the natural mode at the wave frequency and the corresponding modal component of the wave excitation force, the bending governed region at which the response is governed by the bending stiffness, and the spring (buoyancy) governed region at which the response is governed by the spring constant ahd therefore is same as the incident wave form.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.612-614
• /
• 1997

Silicon based micro mirror array is a highly efficient component for use in optical applications such as adaptive optical systems and optical correlators. A micro mirror array designed, fabricated and tested here is consisted of $5{\times}5$ single layer polysilicon, electrostatically driven actuators. In this paper, deflection characteristics and pull-in behavior of the actuators for analog control was studied and particularly, the influence of the residual stress in flexure beams for the restorative force of actuators was considered. The springs are modeled as a residual stress-free spring and a spring with residual stress. In calculation, a mirror with the residual stress-free springs has 30.3N/m spring constant and 31.1V pull-in voltage. On the other hand, a mirror with the stressed springs has 23.6N/m and 27.4V respectively. The experimental result, which is 20.5N/m and 25.5V, shows that the stressed springs ore well modeled.

• Journal of Mechanical Science and Technology
• /
• 제19권10호
• /
• pp.1835-1845
• /
• 2005

In this paper a safe arm with passive compliant joints and visco-elastic covering is designed for human-friendly service robots. The passive compliant joint (PCJ) is composed of a magneto-rheological (MR) damper and a rotary spring. In addition to a spring component, a damper is introduced for damping effect and works as a rotary viscous damper by controlling the electric current according to the angular velocity of spring displacement. When a manipulator interacts with human or environment, the joints and cover passively operate and attenuate the applied collision force. The force attenuation property is verified through collision experiments showing that the proposed passive arm is safe in view of some evaluation measures.