• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1510-1510
• /
• 2001

NIRS uses reflectance signals resulting from bending and stretching vibrations in chemical bonds between carbon, nitrogen, hydrogen, sulfur and oxygen. These reflectance signals are used to measure the concentration of major chemical composition and other descriptors of homogenized and freeze-dried whole broiler carcasses. Six strains of chicken were analyzed and the NIRS model predictions compared to reference data. The results of this comparison indicate that NIRS is a rapid tool for predicting dry matter (DM), fat, crude protein (CP) and ash content in the broiler carcass. Males and females of six commercial strain crosses of broiler chicken (Gallus domesticus) were used in this study (6$\times$2 factorial design). Each strain was grown to 16 weeks of age, and duplicate serial samples were taken for body composition analysis. Each whole carcass was pressure-cooked, homogenized, and a representative sample was freeze-dried. Body composition determined as follows: DM by oven dried method at 105$^{\circ}C$ for 3 hours, fat by Mojonnier diethyl ether extraction, CP by measuring nitrogen content using an auto-analyzer with Kjeldhal digest and ash by combustion in a muffle furnace for 24 hour at 55$0^{\circ}C$. These homogenized and freeze-dried carcass samples were then scanned with a Foss NIR Systems 6500 visible-NIR spectrophotometer (400-2500nm) (Foss NIR Systems, Silver Spring, MD., US) using Infra-Soft-International, ISI, WinISl software (ISI, Port Matilda, US). The NIRS spectra were analyzed using principal component (PC) analysis. This data was corrected for scatter using standard normal “Variate” and “Detrend” technique. The accuracy of the NIRS calibration equations developed using Partial Least Squares (PLS) for predicting major chemical composition and carcass descriptors- such as body mass (BM), bird dry matter and moisture content was tested using cross validation. Discrimination analysis was also used for sex and strain identification. According to Dr John Shenk, the creator of the ISI software, the calibration equations with the correlation coefficient, $R^2$, between reference data and NIRS predicted results of above 0.90 is excellent and between 0.70 to 0.89 is a good quantifying guideline. The excellent calibration equations for DM ($R^2$= 0.99), fat (0.98) and CP (0.92) and a good quantifying guideline equation for ash (0.80) were developed in this study. The results of cross validation statistics for carcass descriptors, body composition using reference methods, inter-correlation between carcass descriptors and NIRS calibration, and the results of discrimination analysis for sex and strain identification will also be presented in the poster. The NIRS predicted daily gain and calculated daily gain from this experiment, and true daily gain (using data from another experiment with closely related broiler chicken from each of the six strains) will also be discussed in the paper.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.1
• /
• pp.67-79
• /
• 1995

Temporal variation of demersal fish in Asan Bay was determined by analyzing seasonal samples collected by an otter tyawl from November 1990 to August 1993. Of 49 species identified, Cynogiossus joyneri, Thrissa koreans and Johnius belengerii predominated in abundance, consisting of $84.7\%$ in fish numbers and $70.5\%$ in biomass. The number of species did not show any significant seasonal variation. Fish numbers and biomass were comparatively high 3n spring, summer and tall, and low in winter. Community structure, analyzed by principal component analysis using rank correlation, showed a clear seasonal trend, which seems to be related to the seasonal effects such as temperature. The number of species and their abundance in the study area were lower than those in other embayments of Korean peninsula. It seems that unstability of the sediments by tidal mixing caused this phenomenon. The total number of species decreased annually. The species of which the frequency of occurrence tends to diminish as time were mainly composed of the species which rarely occurred with low abundance.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.2
• /
• pp.207-222
• /
• 2018

In this study, light absorption of carbonaceous species in $PM_{2.5}$ was investigated using a dual-spot 7-wavelength Aethalometer(model AE33) with 1-min time interval between January 01 and September 30, 2017 at an urban site of Gwangju. During the study period, two Asian dust (AD) events occurred in April (AD I) and May (AD II), respectively, during which light absorption in total suspended particles was observed. Black carbon (BC) was the dominant light absorbing aerosol component at all wavelengths over the study period. Light absorption coefficients by aerosol particles were found to have 2.7~3.3 times higher at 370 nm than at 880 nm. This would be attributed to light absorbing organic aerosols, which is called brown carbon (BrC), as well as BC as absorbing agents of aerosol particles. Monthly average absorption ${{\AA}}ngstr{\ddot{o}}m$ exponent ($AAE_{370-950nm}$) calculated over wavelength range of 370~950 nm ranged from 1.10 to 1.35, which was lower than the $AAE_{370-520nm}$ values ranging from 1.19~1.68 that was enhanced due to the presence of BrC. The estimated $AAE_{370-660nm}$ of BrC ranged from 2.2 to 7.5 with an average of 4.22, which was fairly consistent to the values reported by previous studies. The BrC absorption at 370 nm contributed 10.4~28.4% to the total aerosol absorption, with higher contribution in winter and spring and lower in summer. Average $PM_{10}$ and $PM_{2.5}$ concentrations were $108{\pm}36$ and $24{\pm}14{\mu}g/m^3$ during AD I, respectively, and $164{\pm}66$ and $43{\pm}26{\mu}g/m^3$ during AD II, respectively, implying the greater contribution of local pollution and/or regional pollution to $PM_{2.5}$ during the AD II. BC concentration and aerosol light absorption at 370 nm were relatively high in AD II, compared to those in AD I. Strong spectral dependence of aerosol light absorption was clearly found during the two AD events. $AAE_{370-660nm}$ of both light absorbing organic aerosols and dust particles during the AD I and II was $4.8{\pm}0.5$ and $6.2{\pm}0.7$, respectively. Higher AAE value during the AD II could be attributed to mixed enhanced urban pollution and dust aerosols. Absorption contribution by the light absorbing organic and dust aerosols estimated at 370 nm to the total light absorption was approximately 19% before and after the AD events, but it increased to 32.9~35.0% during the AD events. In conclusion, results from this study support enhancement of the aerosol light absorption due to Asian dust particles observed at the site.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.483-490
• /
• 2016

Automobile door latch is a fine design and assembly techniques are required in order to produce them in a small component assembly shape such as a spring, injection products, a small-sized motor. The door latch is fixed to not open the door of the car plays an important role it has a direct impact on the driver's safety. In this study, during trimming of the terminals of the connector main components of the car door latch, reduce rollover and conducted a research to find a suitable effective shear surface. Using the Taguchi method with orthogonal array of Finite Element Analysis and optimal Design of Experiments were set up parameters for the shear surface quality of the car door latch connector terminals. The design parameters used in the analysis is the clearance, the radius, and the blank holding force, the material of the connector terminal is a C2600. Trimming process optimum conditions suggested by the analysis has been verified by experiments, the shear surface shape and dimensions of a final product in good agreement with forming analysis results.Taguchi method from the above results in the optimization for the final rollover and effective shear surface improved for a vehicle door latch to the connector terminal can be seen that the applicable and useful for a variety of metal forming processes other than the trimming process is determined to be applicable.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.4
• /
• pp.1-10
• /
• 2011

This study investigates the performance of composite (steel-concrete) frame structures through numerical experiments on individual connections. The innovative aspects of this research are in the use of connections between steel beams and concrete-filled tube (CFT)columns that utilize a combination of low-carbon steel and shape memory alloy (SMA) components. In these new connections, the intent is to utilize the recentering provided by super-elastic shape memory alloy tension bars to reduce building damage and residual drift after a major earthquake. The low-carbon steel components provide excellent energy dissipation. The analysis and design of these structures is complicated because the connections cannot be modeled as being simply pins or full fixity ones they are partial restraint (PR). A refined finite element (FE) model with sophisticated three dimensional (3D) solid elements was developed to conduct numerical experiments on PR-CFT joints to obtain the global behavior of the connection. Based on behavioral information obtained from these FE tests, simplified connection models were formulated by using joint elements with spring components. The behavior of entire frames under cyclic loads was conducted and compared with the monotonic behavior obtained from the 3D FE simulations. Good agreement was found between the simple and sophisticated models, verifying the robustness of the approach.

• ALGAE
• /
• v.17 no.2
• /
• pp.105-115
• /
• 2002

Influences of vrious environmental factors on the eutrophication of Nakdong River were analyzed statistically using water samples collected from 1 January, 1999, to 30 September, 2001 at Namji area. The relationships between the concentration of chlorophyll α (eutrophication index) and environmental factors and were analyzed to develop a statistical model which can predict the status of eutrophication. The concentation of chlorophyll α ranged from 66.2 mg · $m^{-3}$ to 70.8 mg · $m^{-3}$ during dry winter season and the average concentration during this study period was 35.5 mg · $m^{-3}$ Namji area of Nakdong River was in the hypereutrohic stage in terms of water quality. Stephanodiscus sp. and Aulacoseria granulata var. angustissima were dominant species during the witnter to spring time and summer to autumn period, respectively. Based on the correlation analysis and the analysis of variance between chlorophyll α concentration and environmental factors, significantly high positive relationships were found in the order of BOD> pH> COD > KMnO₄ consumption > DO > conductivity > alkalinity. In contrast to these factors, significantly negrative relationships were found as in the order of $PO₄^{3-}-P$ >water level>the rate of Namgang-dam discharge > NH₃-N> the rate of Andong-dam discharge> the rate of Hapchoen-dam discharge. Based on the factors analysis of environmental factors on the concentration of chlorophyll α, we obtained five factors as follows. The first factor included water level, pH, turbiditiy, conductivity, alkalinity and the rate of Namgang-dam discharge. The second factor included water temperature DO, NH₄+-N, NO₃- -N. The third factor included KMnO₄ consumption COD and BOD. The fourth factor included the rate of Andong-dam discharge, the rate of Hapcheon-dam discharge, and the rate of Imha-dam discharge. The final factor included T-N T-P and $PO₄^{3-}-P$ > concentration. We derived two statistica models that can predict the occurrence of eutrophication based on the factors by factor analysis, using regression analysis. The first model is the stepwise regression model whose independent variables are the factors produced by factor analysis : chl α (mg · $m^{-3}$ = 42.923+(18.637 factor 3) + (-17.147 factor 1) + (-12.095 factor 5) + (-4.828 factor 4). The second model is the alternative stepwise regression model whose independent variables are the sums of the standardized main component variables:chl α (mg · $m^{-3}$ = 37.295+(7.326 Zfactor 3) + (-2.704 Zfactor 1)+(-2.341 Zfactor 5).

• International Journal of Industrial Entomology and Biomaterials
• /
• v.4 no.2
• /
• pp.93-100
• /
• 2002

Cocoon production, which is a representative of traditional sericulture shifted into silkworm powder production in the spring of 1995. This, infect, signifies the change from the dress-centered textile business to the bio-industry and the functional resource industry. One of the most outstanding shifting is utilization of silkworm larvae for anti-diabetic agent. In Asian countries including Korea, silkworm powder derived from the domestic silkworm (Bombyx mori L.) has long been favored for anti-diabetic agent, but its efficacy was not tested until last decade by modern scientific methods. In this article, we reviewed the major researches on the silkworm powder as a blood glucose-lowering substance. After the beginning test of the efficacy of silkworm powder by a cooperative research between Department of Sericulture and Entomlogy, NIAST, RDA and Kyung Hee University, substantial data have been accumulated so far, In a serial experiment to select best condition, the fifth instar larvae prepared by freeze dry method turned out to have the best blood glucose-lowering effect. In the pharmacological experiment to understand the mechanism of silkworm powder in small intestine, the silkworm powder turned out to inhibit the activity of ${\alpha}$-glucosidase, by competitively binding to $\alpha$-type disaccharides. The animal experiment showed that the extract of silkworm powder prevents a rapid increase of blood glucose level after meal and prevents hunger and law blood glucose level during empty stomach. In the experiment to isolate the major component of silkworm powder, which exerts blood glucose-lowering effect, 1-deoxynojirimy-cin (DNJ) was eventually mass-purified, and it turned out that DNJ isolated from silkworm powder was excellent in its blood glucose-lowering effect. In the experiment to understand the personal difference of the efficacy of the silkworm powder, clinical candidates were divided on the basis of the criterion of traditional Chinese medicine: Tae-Yang, Tae-Um, So-yang, and So-Um. The result showed that silkworm powder has a tendency to reduce blood glucose level at fasting and at 2 hours after meal, and this trend was somewhat obvious in the Tae-Um body type. In summary, we reviewed scientific papers on the efficacy of silkworm powder and its purified DNJ as a blood glucose-lowering agent. These suggest that silkworm powder truly possesses blood glucose-lowering effect as documented in the traditional Chinese medicine, although further researches will be required to develop them as "medical" resource instead of functional food.

• Journal of Sericultural and Entomological Science
• /
• v.2
• /
• pp.73-81
• /
• 1962

This treatise is to analyze the chemical components in the mulberry varieties which are cultured in Korea and to estimate the nutritive values for them. Some of these varieties were developed lately in this country just by the general breeding aspect of mulberry leaf producing and silkworm raising experimentation without analysing the nutritive values of them which may be differed by various culturing condition. This work will be helpful for the improvement of mulberry varieties and the correct judgement of them. The varieties used for the analysis are as followings; A. Morus bombycis Koridz species. 1.Ichi-Hei. 2. Shimano-Uchi B. Morus alba L. species. 3. Kairyo-Nezumigaeshi. 4. Suwon-Daeyop. 5. Suwon No. 3. 6. Suwon No. 4. 7. Yongchon-Chuwoo. C. Morus Ihou (Ser.) Koidz species. 8. Ro-Soh. The specimens were eventually taken under the air and soil dry season because of the rain shortage during the sampling period and the results are found as a rather different from the normal specimen under the normal climate. Therefore, this treatise will be an important report on a special culturing condition and the nutritive values by the mulberry varieties, and still comparable because they were grown under the same condition. The individual conclusions are; 1. Yongchon-Chuwoo which was originated in this country, was found as an important variety for this country from the aspect of mulberry nutritive value and leaf producing amount, and it is believed that this is the best suitable variety for the soil of Korea. 2. Ichi-Hei occupies the better situation as well as Yongchon-Chuwoo from the nutritive criticizing even though it was originated in Japan. 3. The lately developed Suwon No.3 and No.4 are best from the leaf producing point of view, but they are not found such a good varieties from the nutritive aspect. The result may be happened as poor because they were cut before spring sprout started. 4. Ro-Soh which was normally recognized as a poor variety, was also found as a poor nutritive and leaf producing variety. 5. The crude protein and crude fat components in the mulberry leaves decreased as the leaf maturity was progressed, but the crude fiber and crude ash components increased reversively in general view. It was also found that there were some specific changing nature by the mulberry varieties and could not rule them by just one conclusion. 6. During the air and soil dry season, the ash component increases but the hydrocarbon and moisture contents decrease considerably, and which resulted to the increase of mulberry hardness ratio and the decrease of sugar-protein ratio, eventually it causes the decrease of the nutritive value. It was also found that Ichi-Hei, Ro-Soh, and Suwon No. 3 had a strong recovering nature to their normal nutritive condition after raining. 7. Mulberry is of course a rich calorie diet, and is calculated as 50 to 60 Cal. per gram.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.5
• /
• pp.1025-1037
• /
• 2015

Flexible base isolation bearings that separate superstructure from ground have been widely used in the construction field because they make a significant contribution to increasing the fundamental period of the structure, thereby decreasing response acceleration transmitted into the superstructure. However, the established bearing devices installed to uphold the whole building give rise to some problems involved with failure and collapse due to lack of the capacity as modern structures are getting more massive and higher. Therefore, this study suggests new isolation bearings assembled with additional restrainers enabled to reinforcing and recentering, and then evaluates their performance to withstand the seismic load. The superelastic shape memory alloy (SMA) bars are installed into the conventional lead-rubber bearing (LRB) devices in order to provide recentering forces. These new systems are modeled as component spring models for the purpose of conducting nonlinear dynamic analyses with near fault ground motion data. The LRB devices with steel bars are also designed and analyzed to compare their responses with those of new systems. After numerical analyses, ultimate strength, maximum displacement, permanent deformation, and recentering ratio are compared to each model with an aim to investigate which base isolation models are superior. It can be shown that LRB models with superelastic SMA bars are superior to other models compared to each other in terms of seismic resistance and recentering effect.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.2
• /
• pp.116-123
• /
• 2007

This experiment was conducted to investigate the distribution and burden characteristics of heavy metals in the rainwater sampled at Suwon area, in the middle part of Korea, from April 2002 to October 2003. The relationship between concentration of heavy metal and other chemical properties in the rainwater was also evaluated. Chemical properties in the rainwater were various differences with raining periods and years. It appeared that a weighted average pH of rainwater was ranged from 4.7 to 5.5. Heavy metal concentrations in the rainwater were ranked as Zn>Pb>Cu>Ni>Cr>As>Cd. As compared with heavy metal concentrations of rainwater in 2002, Cd, Cu and As were higher than other element in 2003. There were positive correlation between major ionic components, such as Ca, Mg, and K, and heavy metal concentrations of rainwater, and As, CU, Cu, Zn and Ni were relatively higher relationship than Pb and Cr in respective to correlation coefficient. For heavy metal distribution of rainwater, the order of average enrichment factors was Cd>Pb>AS>Cu>Zn>Ni>Cr, and these were relatively higher than the natural component such as Fe, Mg and Ca. The monthly enrichment factors were relatively high in the spring (from April to May) at Suwon. The monthly amount of heavy metal precipitation was high in the rainy season from June to August because of great influence of rainfall.