• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.6
• /
• pp.120-129
• /
• 2008

Removal rate of $NO_3-N$ and TN in a free water surface wetland system with litter layer on its bottom was compared with that without one. The system was established on floodplain in the down reach of the Gwangju Stream in 2001. Its dimensions were 31 meters in length and 12 meters in width. Water of the stream was funneled into it and its effluent was discharged back into the channel. Average litter layer of 9.6 cm was formed on its bottom in 2007. The layer and above-ground parts of reeds and cattails on the system were eliminated in Spring 2008. Volumes and water quality of inflow and outflow of the system were analyzed from May to November in 2007 and 2008, respectively. Inflow into the system both in 2007 and 2008 averaged approximately $40m^3/day$ and hydraulic residence time both in 2007 and 2008 was about 1.5 days. Average influent $NO_3-N$ concentration in 2007 and 2008 was 2.16 and 2.05 mg/L, respectively and influent TN concentration in 2007 and 2008 averaged 3.98 and 3.89 mg/L, respectively. With a 0.05 significance level, effluent temperatures, influent concentrations of $NO_3-N$ and TN, and stem numbers per square meter and height of the emergent plants showed no difference between the system with litter layer and without one. $NO_3-N$ removal in the system with litter layer and without it averaged 55.59 and 46.06%, respectively and TN retention averaged 57.24 and 48.97%, respectively. Both $NO_3-N$ and TN abatement rates in the system with litter layer were significantly high (p < 0.001) when compared with those without one. The wetland system having litter layer on its bottom was more efficient for $NO_3-N$ and TN retention than that without one.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.1
• /
• pp.59-71
• /
• 2012

In order to elucidate the mechanism of fishing condition variation of anchovy in the set net fisheries of Anggang Bay, the monthly catch of anchovy was analyzed and examined based on the data acquired from 2006 to 2010 in 13 different fishing grounds. Anchovy consistently appeared from April to December and reached the production of 840 to 1,424 t (average : 1,228 t), with a big annual variation. However, anchovy production in this area accounts for approximately 75% of the production by set net in Anggang Bay whereas it holds 6.8% of the nationwide production (=18,034 t) by set net. The school of anchovy starts to appear in April at the west mouth of the bay and move north-eastward. Afterward, having three of clockwise turns in the middle of the bay, they scatter to swim into the deep place of the bay and finally go out to turn back to their coming way. These behaviors of anchovy are likely related to thermal fronts as well as distributions of food. The production of anchovy (y, kg) relied greatly on frequencies of effective northeasterly ($x_1$) or northwesterly ($x_2$) wind (${\leq}$3.5m/s) which blow between April and June. Their relationships are as follows: $y=1086.27+21.499x_1-15.16x_2$ (r=0.901). Consequently, we concluded that the northeasterly wind, which appears in the breeding season of spring, played a role to retard the movement of anchovy school to the eastern sea, while the northwesterly wind inhibits the invasion of anchovy school into the bay.

• Korean Journal of Oriental Medicine
• /
• v.11 no.2
• /
• pp.23-33
• /
• 2005

Four Properties and five Flavors of Drugs is interpreted by adaptation of human body to the environmental theory(天人相應). The Structural model of the body is compared with sky, earth, sun and moon (天, 地, 日, 月). The natural changes of the four seasons give rise to that of Four Properties and five Flavors of Drugs. On equal terms it is happened in our body. On this study we can draw an analogy between sky, earth, sun & moon (天, 地, 日, 月) and the body. The six bu(六腑) is related to the earth, the five ju(五主) to the sky, the five jang(五臟) to the sun, the meridians system (經絡) to the moon. When spring, the air is warm, the water element of the earth is ascending, and the earth gives birth to the sour flavor. Like this, the water element is absorbed by six bu and then is ascended to the meridian system. When summer, the air is hot and the water element of the earth is floated, the earth make the bitter flavor. In the same way, the six bu absorbed the hot air from the five ju and the water element is quickly absorbed by six bu and then the water element is ascended to the meridian system. When rainy season (長夏), the earth creates the sweet flavor The sweet flavor give warmer energy to the five jang and the six bu. When autumn, the earth change the sweet flavor into pungent. The earth gives warmer energy to the sky, because of cool weather According to same process, the pungent flavor give warmer energy to the five jang and the six bu, and the meridian system gets back the water element from the five ju. When winter, the air is cold and the water element of the earth is hidden. The sky and the earth are not interchangeable. At that time, the earth produce the salty flavor and the water element is keeping in the meridian system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.86-92
• /
• 2008

Recently, the use of tubes in the manufacturing of the automobile parts has increased and therefore many automotive manufactures have tried to use hydro-forming technology. The hydro-forming technology may cause many advantages to automotive applications in terms of better structural integrity of the parts, lower cost from fewer part count, material saving, weight reduction, lower spring-back, improved strength and durability and design flexibility. In this study, the whole process of front engine cradle (or front sub-frame) parts development by tube hydro-forming using steel material having tensile strength of 440MPa grade is presented. At the part design stage, it requires feasibility study and process design aided by CAE (Computer Aided Design) to confirm hydro-formability in details. Effects of parameters such as internal pressure, axial feeding and geometry shape on automotive sub-frame by hydro-forming process were carefully investigated. Overall possibility of hydro-formable sub-frame parts could be examined by cross sectional analyses. Moreover, it is essential to ensure the formability of tube material on every forming step such as pre-bending, preforming and hydro-forming. At the die design stage, all the components of prototyping tools are designed and interference with press is examined from the point of geometry and thinning.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.2
• /
• pp.162-175
• /
• 2008

Gyeongju, which was the central city of the ancient civilization at Silla Kingdom, has various kinds of stone cultural properties. It is significantly important to preserve historical sources of Korea. However, recent air quality data measured in Gyeongju did not show good air quality level. In order to investigate variation of the concentration of the air pollutants with meteorological condition, an air quality monitoring and an aerosol sampling were conducted during the intensive monitoring period in Gyeongju. Impacts of the meteorological factors on the air pollutants were also analyzed based on the air mass pathway categories using HYSPLIT model and the local wind patterns using MM5 model. The prevailing air mass pathways were classified into four categories as following; category I affected by easterly marine aerosols, category II affected by northwesterly continental aerosols, category III affected by southwesterly continental aerosols, and category IV affected by northerly continental aerosols. The concentrations of the air quality standards were relatively lower during the fall intensive monitoring period. At that time, the easterly marine air mass pattern was dominated. The seasonal average mass concentration of $PM_{10,Opt}$, which optically measured at the monitoring site, was the highest value of $77.6{\pm}28.3\;{\mu}g\;m^{-3}$ during the spring intensive monitoring period but the lowest value of $20.1{\pm}5.3\;{\mu}g\;m^{-3}$ during the fall intensive monitoring period. The concentrations of $SO_2$ and CO were relatively higher when the air mass came from the northwestern continent or the northern continent. The concentrations of ${SO_4}^{2-}$ and ${NO_3}^-$ increased under the northwesterly continental condition. It was estimated that the acidic aerosols were dominated in the atmosphere of Gyeongju when the air mass came from the continental regions.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.2
• /
• pp.148-155
• /
• 2011

Thermal treatment techniques are used for modifying wood and wood-based materials to improve dimensional stability and hygroscopicity. This study investigated the effects of press pressure and temperature on density, vertical density profile, thickness swelling and surface hardness of eucalyptus wood boards. The experimental wood boards were prepared from Turkish River Gum ($Eucalyptus$ $camaldulensis$ Dehn.). The surface hardness value increased with increasing press pressure in the treated groups. The application of a higher pressure at the same temperature level increased the amount of swelling of wood. It means that it is not needed for application of higher pressure to enhance the dimensional stability of wood. It is expected that it is possible to produce increased hardness, dimensional stability and durability by application of hot pressing treatment. This research showed that different press pressure and temperature values should be used to improve the performance properties of eucalyptus wood so that the end-use of the wood materials could be expanded.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.11a
• /
• pp.425-430
• /
• 2008

Residential architecture was a lot more changed due to adopting modern residential type since 1960s. But people in farm houses are still living in a space of their past life causing a discrepancy. For this reason, the paper will identify the changed use for farm houses focusing on their plane views, and reason for the changed use as well. The result of this paper is expected to play a role for practical data to reasonably change and re-model farm houses located in back of cities such as Hyunpoong area. Targeted area for this paper, in order to survey change in residential environment due to industrialization and modernization, has narrowed down to 42 farm houses which are located Yuga-Myun, Hyunpoong-Gun, Dalsung-Gun where tradition and modern characteristics are harmonized being built before 1960s Researching relied on both documentary records and survey on the site, and survey on documentary records was performed in a way that preceding research for changed use of residential area was to be compared with people's farm houses in Kyeongsang-Do area, and survey on the site was carried out by photographing and land surveying and interview and analysis for them, and finally we acquired the result by analyzing use of interior for houses and plane view and relations between culture and social environment. From the result of this paper, there was a trend that farm houses had been improved function of a specific space by enlarging space and enlarged construction for inner rooms. And among spaces, kitchen and bath room was mostly enlarged its left side, and inner room had mostly enlarged its rear side, and kitchen was frequently enlarged in its side space. These kinds of variation in space is believed to be result of change of life style and house facilities

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.681-685
• /
• 2000

A computer software was developed in our laboratory to automatically control the pigs environment by the image analysis system (IAS), which monitors and analyzes the pig's behavior and feeds the results back to the computer hardware. Three feeding trials were conducted with growing pigs ($L{\times}Y$) to test the effectiveness of the IAS under various seasons. In all three trials, the open-sided conventional pens with half-slatted floor were used as controls; for the IAS treatment, fully-slatted floors were used in the windowless pens. Experiment 1 was conducted in the winter for 30 d with 24 growing pigs. There were two treatments (Conventional vs. IAS), and three pens (replicates) per treatment. During the growing period, the feed efficiency was significantly (p<0.05) improved by the IAS. In addition, the pigs reared under the IAS during the growing period displayed better growth rate during the finishing period than did the pigs reared under the conventional conditions. Experiment 2 was conducted in the summer for 30 d with 24 growing pigs. The experimental design was the same as Experiment 1. During the finishing period, all the pigs were kept in conventional open-sided pens until their market weights to evaluate their carcass characteristics. During the growing period, the growth rate and feed efficiency of the pigs in the IAS was better than those of the control pigs. In addition, various carcass characteristics were significantly improved by the IAS rearing during the growing period. Experiment 3 was conducted with 30 growing pigs for 30 d in the spring. The experimental design was the same as Experiment 1. No difference was found in growing performance between the control and IAS pigs. It could be concluded that the IAS is effective in providing optimum conditions for the growing pigs in summer and winter seasons. In addition, providing an optimum environment during the growing period results in improved growth rate, feed efficiency, and carcass qualities for the finishing pigs.

• Journal of Sericultural and Entomological Science
• /
• v.44 no.1
• /
• pp.9-12
• /
• 2002

The agronomic characteristics and fertility of Morus tiliaefolia growing wild in Korean peninsula are as follows. The possibility of seed formation is 46∼80% and that of germination is 19∼28%. The height period of making flower is April 4-May 3, it means that is later than Morus bombycis, faster than Kaeryangppong. Green tip sprouting stage in spring is April 21∼24. This is later than Morus bombycis and faster than Kaeryangppong. The leaf has very big width and the ratio of leaf length to leaf width is 1.05. The thickness of leaf is thicker than Morous bombycis. There are a lot of matter of soluble nitrogen free, crude ash, and are little crude protein, crude fat and crude fiber in chemical contents of maturation leaf. The attitude of low cutting is spread out type and the branch is long type. The internord length is long. It is weak against cold and die-back.

• Journal of Sericultural and Entomological Science
• /
• v.44 no.1
• /
• pp.22-27
• /
• 2002

The Yongcheonppong was cultured in the form of a dense mulberry field coverd with polyethylene film and was tested in Suwon and Chunchon. The agronomic characteristic and some consideration on the result of the silkworm rearing were as follows. The Yongcheonppong was the medium budding variety and was longer in length of young shoots than the Kaeryangppong. The Yongcheonppong was higher in leaf yield in spring than the Kaeryangppong and was lower in leaf yield in autumn than the Kaeryangppong to the contrary. The Yongcheonppong was a little higher in the number of branches and was longer in the length of the branch than the Kaeryangppong and so was appropriate for rearing with mulberry shoots. Yongcheonppong was more resistant to twig blight and die-back and was a little susceptible to dwarf disease. As the Yongcheonppong was most resistant to the freezing injury, it was appropriate for the cold region and enabled the farmers to rear some amount of silkworms every year. In Chunchon, The Yongcheonppong increased by 11% in cocoon yield than the Kaeryangppong when the freezing injury occurred 1 year out of 2 years and produced about the same as the Kaeryangppong in cocoon yield when the freezing injury occurred 1 year out of 3 years.